Skip to main content
U.S. flag
Back to results

Fire Protection Engineer

Department of the Army
U.S. Army Corps of Engineers
Headquarters, U.S. Army Corps of Engineers, Directorate of Civil Works
This job announcement has closed

Summary

About the Position: This is a permanent position with Headquarters, US Army Corps of Engineers, Directorate of Civil Works located in the U.S. Government Accountability Office (GAO) building in Washington, DC.

This position is a Permanent Full-Time position. This is a developmental position and will be filled at the GS-13 and/or target grade GS-14 level. Management may select at any of the grade levels announced

Overview

Help
Reviewing applications
Open & closing dates
08/08/2025 to 08/22/2025
Salary
$90,025 to - $138,296 per year

Salary posted is the General Schedule Base Salary and will be adjusted to the locality of selectee's physical location

Pay scale & grade
GS 13 - 14
Locations
1 vacancy in the following locations:
Huntsville, AL
Mobile, AL
Phoenix, AZ
Los Angeles, CA
Remote job
No
Telework eligible
Yes—Eligible for situational telework only
Travel Required
Occasional travel - You may be expected to travel for this position.
Relocation expenses reimbursed
Yes—You may qualify for reimbursement of relocation expenses in accordance with agency policy.
Appointment type
Permanent
Work schedule
Full-time
Service
Competitive
Promotion potential
14
Supervisory status
No
Security clearance
Not Required
Drug test
No
Position sensitivity and risk
Non-sensitive (NS)/Low Risk
Trust determination process
Financial disclosure
No
Bargaining unit status
No
Announcement number
CERA258823542324
Control number
842860100

Videos

Duties

Help
  • Incumbent will serve as the nationally recognized expert in the design of Fire protection systems for facilities.
  • Incumbent's responsibilities will include performing and providing expert reporting engineering activities for military construction and maintenance projects for installations worldwide.
  • As technical expert, will develop plans, policies and procedures for accomplishing scientific and technical objectives for global programs and represent the U.S Army Corps of Engineers (USACE) in areas of expertise for fire protection systems.
  • Incumbent will be responsible for performing analysis and research in the development of criteria related to Department of Defense (DoD) Fire protection systems as used by DoD and contractor engineers world-wide.
  • Develops and proposes changes to criteria design and construction, and other necessary data to promote technical excellence in fire protection engineering technology.
  • As the expert, the incumbent provides technical quality assurance and evaluation of studies, designs, specification and/or other related building system installations.
  • Leads the efforts of the Fire protection Engineering Community of Practice and technical teams for execution of assigned mission in support of USACE and other clients and customers.
  • Acts a liaison with high level officials and technical personnel.
  • Conducts briefings and presentations at Federal and industry engineering meetings, conferences and symposiums.

Requirements

Help

Conditions of employment

  • Appointment may be subject to a suitability or fitness determination, as determined by a completed background investigation.
  • The duties of this position require the incumbent to possess or obtain and maintain a valid state Driver's License in one of the 50 U.S. states or possessions to operate vehicles.
  • Incumbent must obtain a Professional Engineer (PE) license within one (1) year of employment.

Qualifications

Who May Apply: Only applicants who meet one of the employment authority categories below are eligible to apply for this job. You will be asked to identify which category or categories you meet, and to provide documents which prove you meet the category or categories you selected. See Proof of Eligibility for an extensive list of document requirements for all employment authorities.

  • Current Department of Army Civilian Employees
  • Domestic Defense Industrial Base/Major Range and Test Facilities Base Civilian Personnel Workforce
  • Interagency Career Transition Assistance Plan
  • Land Management Workforce Flexibility Act
  • Military Spouses, under Executive Order (E.O.) 13473
  • Priority Placement Program, DoD Military Reserve (MR) and National Guard (NG) Technician Eligible
  • Priority Placement Program, DoD Military Spouse Preference (MSP) Eligible
  • Priority Placement Program, DoD MR and NG Preference Eligible Tech Receiving Disability Retirement
  • Priority Placement Program, DoD Retained Grade Preference Eligible
  • Veterans Employment Opportunity Act (VEOA) of 1998



In order to qualify, you must meet the education and experience requirements described below. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student; social). You will receive credit for all qualifying experience, including volunteer experience. Your resume must clearly describe your relevant experience; if qualifying based on education, your transcripts will be required as part of your application. Additional information about transcripts is in this document.

Basic Requirement for Fire Protection Engineer:
A. Degree: Bachelor's degree (or higher degree) in engineering. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher degree) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); OR (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.

OR

B. Combination of Education and Experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:

1. Professional registration or licensure - Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.

2. Written Test - Evidence of having successfully passed the Fundamentals of Engineering (FE) examination, or any other written test required for professional registration, by an engineering licensure board in the various States, the District of Columbia, Guam, or Puerto Rico.

3. Specified academic courses - Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in A above. The courses must be fully acceptable toward meeting the requirements of an engineering program.

4. Related curriculum - Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions.

In addition to meeting the basic requirement above, to qualify for this position you must also meet the qualification requirements listed below:

Experience required for GS-13: To qualify based on your work experience, your resume must describe at least one year of experience which prepared you to do the work in this job. Specialized experience is defined as: serving as a technical authority on military and civil works facilities fire protection and life safety policies, standards, regulations and principles; interpreting and establishing regulations, criteria and standards pertaining to fire protection; applying knowledge of architectural/engineering fields to solve engineering issues/problems; interpreting regulations and enforcement standards as a result of surveys; investigations and reports; and communicating effectively to persuade and influence key officials or other stakeholders. This definition of specialized experience is typical of work performed at the next lower grade/level position in the federal service (GS-12).

Experience required for GS-14: To qualify based on your work experience, your resume must describe at least one year of experience which prepared you to do the work in this job. Specialized experience is defined as: authoritative professional and technical proficiency in the reviews and assessments of fire protection and safety requirements pertaining military and civil works facilities; providing fire protection and safety training within the organization; analyzing quantitative and qualitative techniques to correct, resolve and recommend improvements; and communicating effectively with higher echelon to negotiate, persuade and influence acceptance of policies and methods. This definition of specialized experience is typical of work performed at the next lower grade/level position in the federal service (GS-13).

You will be evaluated on the basis of your level of competency in the following areas:
  • Design
  • Fire Engineering
  • Fire/Life Safety Training, Public Education, and Outreach
  • Safety, Security, and Fire Protection


GS-13: Time in Grade Requirement: Applicants who have held a General Schedule (GS) position within the last 52 weeks must have 52 weeks of Federal service at the next lower grade or equivalent (GS-12).
GS-14:Time in Grade Requirement: Applicants who have held a General Schedule (GS) position within the last 52 weeks must have 52 weeks of Federal service at the next lower grade or equivalent (GS-13).

Education

FOREIGN EDUCATION: If you are using education completed in foreign colleges or universities to meet the qualification requirements, you must show the education credentials have been evaluated by a private organization that specializes in interpretation of foreign education programs and such education has been deemed equivalent to that gained in an accredited U.S. education program; or full credit has been given for the courses at a U.S. accredited college or university. For further information, visit: https://sites.ed.gov/international/recognition-of-foreign-qualifications/.

Additional information

  • Male applicants born after December 31, 1959, must complete a Pre-Employment Certification Statement for Selective Service Registration.
  • You will be required to provide proof of U.S. Citizenship.
  • One year trial/probationary period may be required.
  • Direct deposit of pay is required.
  • Selection is subject to restrictions resulting from Department of Defense referral system for displaced employees.
  • If you have retired from federal service and you are interested in employment as a reemployed annuitant, see the information in the Reemployed Annuitant information sheet.
  • This is a Career Program (CP) 18 - Engineers and Scientists position.
  • Multiple positions may be filled from this announcement.
  • Permanent Change of Station (PCS) allowances may be authorized, subject to the provisions of the Joint Travel Regulations and an agency determination that a PCS move is in the Government Interest.

Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution.

How you will be evaluated

You will be evaluated for this job based on how well you meet the qualifications above.

Once the announcement has closed, a review of your application package (resume, supporting documents, and responses to the questionnaire) will be used to determine whether you meet the qualification requirements listed on this announcement. If you are minimally qualified, your resume and supporting documentation will be compared against your responses to the assessment questionnaire to determine your level of experience. If, after reviewing your resume and/or supporting documentation, a determination is made that you have inflated your qualifications and/or experience, you may lose consideration for this position. Please follow all instructions carefully when applying, errors or omissions may affect your eligibility.

You should list any relevant performance appraisals and incentive awards in your resume as that information may be taken into consideration during the selection process. If selected, you may be required to provide supporting documentation.

You may claim Military Spouse preference.

Military Spouse Preference (MSP) applicants will receive preference consideration and will be placed (if selected) at the highest grade for which they have applied and are determined best qualified, up to and including the full performance level.

You may claim Priority Placement Program (PPP) preference.

DoD Priority Placement Program (PPP) Applicants will receive preference consideration at the full-performance grade level only.

Interagency Career Transition Assistance Program (ICTAP). If you are a Federal employee in the competitive service and your agency has notified you in writing that you are a displaced employee eligible for ICTAP consideration, you may receive selection priority for this position. To receive selection priority, you must: (1) meet ICTAP eligibility criteria (2) be rated well-qualified for the position and; (3) submit the appropriate documentation to support your ICTAP eligibility. To be considered well-qualified and receive selection priority applicants must satisfy all qualification requirements for the position and receive a score of 90 or above. Additional information about the program is on OPM's Career Transition Resources website.

Your session is about to expire!

Your USAJOBS session will expire due to inactivity in 8 minutes. Any unsaved data will be lost if you allow the session to expire. Click the button below to continue your session.