Skip to main content
U.S. flag

General Engineer (Special Projects)

Department of Defense
Office of the Secretary of Defense
Office of the Under Secretary of Defense for Research & Engineering (USD(R&E))
This job announcement has closed

Summary

This position is located in the Office of the Under Secretary of Defense for Research and Engineering (OUSD(R&E)). The USD(R&E) serves as the Chief Technology Officer and is responsible for research, development, and prototyping activities within the Department of Defense (DoD).

Overview

Help
Reviewing applications
Open & closing dates
07/01/2025 to 07/07/2025
Salary
$142,488 to - $195,200 per year
Pay scale & grade
NH 4
Location
1 vacancy in the following location:
Falls Church, VA
Remote job
No
Telework eligible
Yes—as determined by the agency policy. Situational telework may be authorized and is subject to the express approval of the supervisor for weather and safety purposes only.
Travel Required
Occasional travel - You may be expected to travel for this position.
Relocation expenses reimbursed
No
Appointment type
Permanent
Work schedule
Full-time
Service
Competitive
Promotion potential
None
Job family (Series)
Supervisory status
No
Security clearance
Sensitive Compartmented Information
Drug test
Yes
Position sensitivity and risk
Special-Sensitive (SS)/High Risk
Trust determination process
Financial disclosure
No
Bargaining unit status
No
Announcement number
ST-12755098-25-KM
Control number
839770200

Duties

Help

Incumbent typical work assignments may include the following:

  • Conceiving, developing, managing, and integrating compartmented capability development programs to enhance the operability, lethality, and cybersecurity of current and future U.S. warfighting weapon systems.
  • Providing subject-matter expertise, particularly in warfighting technologies and supporting infrastructure for the evaluation of proposed top-tier capability developments.
  • Delivering technical assessments and analysis to provide recommended innovative approaches, technologies, and capabilities to address near-term and future critical joint warfighting capability gaps.
  • Identifying risks, technical issues, and programmatic shortfalls and recommending corrective courses of action.
  • Providing and managing technical support for compartmented warfighting capability development, integration, and transition of new technologies that close time-critical gaps in high-priority and multi-component warfighting missions.

Requirements

Help

Conditions of employment

  • U.S. Citizenship is required
  • Males born after 12-31-59 must be registered or exempt from Selective Service (see https://www.sss.gov/Home/Registration)
  • May be required to successfully complete a probationary/trial period
  • Must be determined suitable for federal employment
  • Required to participate in the direct deposit program
  • This position is subject to pre-employment and random drug testing
  • This position is subject to the DoD Priority Placement Program
  • The employee must be able to obtain and maintain appropriate security clearance, Top Secret with access to Sensitive Compartmental Information (SCI)
  • The employee is required to submit a Financial Disclosure Statement, OGE-450, Confidential Financial Disclosure Report upon entering the position and annually in accordant with DoD Directive 5500-7-R. Joint Ethics Regulation dated 29 November 2007
  • This position may require 15% of travel
  • This position requires an Engineering and Technical Management, Practitioner acquisition certification. The incumbent has 60 months to achieve this certification.
  • The incumbent is required to sign a critical acquisition position service agreement to remain assigned to the position for three years

Qualifications

For qualifications determinations, it is recommended that applicants include their months and hours worked per week for each employment listed on their resume. If a determination is not able to be made about the length of your creditable experience for qualification requirements, you will be removed from consideration.

Read more about what should I include in my federal resume? at https://www.usajobs.gov/Help/faq/application/documents/resume/what-to-include/

You may qualify at the NH-04 (GS-14/15) level, if you fulfill the following qualification requirement:

General Engineering Series, 0801:

A. Degree: Engineering. To be acceptable, the program must: (1) lead to a bachelor's degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.

OR

B. Combination of education and experience -- college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:
1. Professional registration or licensure -- Current registration as an Engineer Intern (EI), Engineer in Training (EIT)1, or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.
2. Written Test -- Evidence of having successfully passed the Fundamentals of Engineering (FE)2 examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico.
3. Specified academic courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A.
4. Related curriculum -- Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all inclusive.)
AND

In addition to the IOR, you may qualify at the NH-04 (equivalent to the GS-14/15) level, if you fulfill the following qualification requirement:
One year of specialized experience equivalent to the NH-03 (equivalent to the GS-13) grade level in the Federal service (experience may have been gained in the private sector): 1) Developing programs to enhance the operability, lethality, and/or cybersecurity of U.S. warfighting weapon systems; 2) providing subject-matter expertise, particularly in warfighting technologies, to evaluate top-tier capability developments; 3) delivering technical assessments to provide recommended innovative approaches and capabilities to address critical joint warfighting capability gaps; 4) and coordinating high-level meetings with diverse stakeholders, ensuring effective communication and collaboration.

Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience.

Current or Former Political Appointees: Beginning January 1, 2010, agencies must seek prior approval from OPM before they can appoint a current or recent political appointee to a competitive or non-political excepted service position at any level under the provisions of title 5, United States Code. If you are currently or have been within the last 5 years, a political Schedule A, Schedule C, or Non-career SES employee in the executive branch, you MUST disclose that to the Human Resources Office. Submit a copy of your applicable SF-50, along with a statement that provides the following information regarding your most recent political appointment:

  • Position title;
  • Type of appointment (Schedule A, Schedule C, Non-career SES, or Presidential Appointee);
  • Agency; and,
  • Beginning and ending dates of appointment.

All qualifications and education requirements must be met by the closing date of this announcement and clearly documented in your resume.

Education

You MUST provide transcripts to support your educational claims. Education must be accredited by an accrediting institution recognized by the U.S. Department of Education. Unless otherwise stated: (1) official or unofficial transcripts are acceptable, or (2) you may submit a list with all of your courses, grades, semester, year, and credit for the course. All materials must be submitted by the closing date of the announcement.

PASS/FAIL COURSES: If more than 10 percent of your undergraduate course work (credit hours) were taken on a pass/fail basis, your claim of superior academic achievement must be based upon class standing or membership in an honor society.

GRADUATE EDUCATION: One academic year of graduate education is considered to be the number of credits hours your graduate school has determined to represent one academic year of full-time study. Such study may have been performed on a full-time or part-time basis. If you cannot obtain your graduate school's definition of one year of graduate study, 18 semester hours (or 27 quarter hours) should be considered as satisfying the requirement for one year of full-time graduate study.

ARE YOU QUALIFYING BASED ON EDUCATION or A COMBINATION OF EDUCATION AND EXPERIENCE?
You must provide sufficient documentation of your education in your resume. You are strongly encouraged to provide a copy of transcripts or degrees in your application package. It is also acceptable to document your applicable course listing in your resume (course number, credits earned, etc.). Education must be accredited by an accrediting institution recognized by the U.S. Department of Education in order for it to be credited towards qualifications. Therefore, provide only the attendance and/or degrees from schools accredited by accrediting institutions recognized by the U.S. Department of Education. Applicants can verify accreditation at the following website: http://www.ed.gov/admins/finaid/accred/index.html. All education claimed by applicants will be verified by the appointing agency. If selected, an official/sealed transcript will be required prior to appointment.

FOREIGN EDUCATION: If you are using education completed in foreign colleges or universities to meet the qualification requirements, you must show the education credentials have been evaluated by a private organization that specializes in interpretation of foreign education programs and such education has been deemed equivalent to that gained in an accredited U.S. education program; or full credit has been given for the courses at a U.S. accredited college or university. For further information, visit: https://www2.ed.gov/about/offices/list/ous/international/usnei/us/edlite-visitus-forrecog.html

Additional information

Career Transition Assistance Programs: These programs apply to employees who have been involuntarily separated from a Federal service position within the competitive service or Federal service employees whose positions have been deemed surplus or no longer needed. To receive selection priority for this position, you must: (1) meet CTAP or ICTAP eligibility criteria; (2) be rated well-qualified for the position with a score of 85 or above; and, (3) submit the appropriate documentation to support your CTAP or ICTAP eligibility. For more information visit: https://www.opm.gov/policy-data-oversight/workforce-restructuring/employee-guide-to-career-transition/

Employed Annuitants (Reemployed Annuitants): Applicants in receipt of an annuity based on civilian employment in the Federal Service are subject to the DoD Policy on The Employment of Annuitants. http://www.esd.whs.mil/DD/DoD-Issuances/140025/

Nepotism: Under the provisions of 5 USC 3110, an individual may not be appointed into a position if the position is under the supervisory chain of command of a relative.

Military Spouse Preference (MSP) Eligible: Military Spouse Preference applicants, must be selected and placed at the highest grade level for which they have applied and been determined best qualified up to and including the full performance level. You must include a completed copy of the Military Spouse PPP Self-Certification Checklist dated within 30 days along with the documents identified on the checklist to verify your eligibility for Military Spouse Preference. Click here to obtain a copy of the Military Spouse PPP Self-Certification Checklist.

Military Reserve (MR) and National Guard (NG) Technicians PPP Eligible: MR and NG technicians PPP applicants must be selected and placed at the full performance level if determined well qualified. You must include a completed copy of the Military Reserve and National Guard Technician PPP Self-Certification Checklist to verify your eligibility for Military Reserve and National Guard Technician preference. Click here to obtain a copy of the Military Reserve and National Guard Technician PPP Self-Certification Checklist.6.

Military Reserve (MR) and National Guard (NG) Technicians Receiving Disability Retirement PPP Eligible: MR and NG technicians receiving disability retirement PPP applicants must be selected and placed at the full performance level if determined well qualified. You must include a completed copy of the Military Reserve and National Guard Technician Disability PPP Self-Certification Checklist to verify your eligibility for Military Reserve and National Guard Technician Disability preference. Click here to obtain a copy of the Military Reserve and National Guard Technician Disability PPP Self-Certification Checklist.7.

Retained Grade PPP Eligible: Retained Grade PPP applicants, must be selected and placed at the full performance level if determined well qualified. You must include a completed copy of the Retained Grade PPP Self-Certification Checklist to verify your eligibility for Retained Grade preference. Click here to obtain a copy of the Retained Grade PPP Self-Certification Checklist

Additional vacancies may be filled by this announcement.

How you will be evaluated

You will be evaluated for this job based on how well you meet the qualifications above.

ACTIVE DUTY SERVICE MEMBERS: The VOW Act Chapter 21 of Title 5, United States Code (U.S.C.), Section 2108a, requires Federal agencies treat active duty service member as veterans, disabled veterans, and preference eligible, when they submit, at the time they apply for a Federal job, a "certification" of active service in lieu of a DD-214, assuming the service member is otherwise eligible. A "certification" letter should be on letterhead of the appropriate military branch of the service and contain (1) the military service dates including the expected discharge or release date; and (2) the character of service. The service member's military service dates are necessary in order to determine whether he or she meets the definition of "veteran" under 5 U.S.C. 2108(1). The "certification" must reflect the service member is expected to be discharged or released from active duty service in the armed forces under honorable conditions not later than 120 days after the date of submission. The "certification" must be signed by, or by direction of, the adjutant, personnel officer, or commander of your unit or higher headquarters and must indicate when your terminal leave will begin (if applicable), your rank, dates of active duty service, the type of discharge and character of service (i.e. honorable). Further, under paragraph (h) of the rule, agencies are required to verify a qualifying separation from military service prior to appointment, through the DD-214 or other appropriate documentation. Your preference and/or appointment eligibility will be verified prior to appointment. Active duty members that fail to provide a valid "certification" of service with their initial application will be found "not eligible." Military members may be appointed before the effective date of their military retirement/separation if member is on terminal leave.

Once the announcement has closed, a review of your resume and supporting documentation will be used to determine whether you meet the qualification requirements listed on this announcement. If you are minimally qualified, your resume and supporting documentation will be compared against your responses to the assessment questionnaire to determine your level of experience. If, after reviewing your resume and/or supporting documentation, a determination is made that you have inflated your qualifications and/or experience, you may lose consideration for this position. Please follow all instructions carefully when applying, errors or omissions may affect your eligibility.

All qualified candidates will be assigned to a quality category. The category assignment is a measure of the degree in which your background matches the competencies required for this position. Your qualifications will be evaluated based on your responses to the assessment questionnaire. The assessment questionnaire link can be found under the 'How To Apply' section.

  • Communication
  • General Engineering
  • Organizational Awareness
  • Technical Competence

Your session is about to expire!

Your USAJOBS session will expire due to inactivity in 8 minutes. Any unsaved data will be lost if you allow the session to expire. Click the button below to continue your session.