An official website of the United States government
This position is for an AIR CARGO SPECIALIST, PD# D1965000, part of the Nevada Air National Guard. The primary purpose of this position is to perform a full variety of Air Transportation functions necessary to manage the day-to-day Air Transportation and small air terminal operations including but not
limited to, airdrop and airdrop inspections, rigging responsibilities, wing deployment training, passenger and cargo manifesting, Joint Inspection, etc.
01/28/2025 to 02/25/2025
$30.66 - $35.79 per hour
WG 10
1 vacancy in the following location:
No
No
Occasional travel - You may be expected to travel for this position.
No
Permanent
Full-time
Excepted
None
No
No
NV-12673219-AF-24-148
829628600
THIS POSITION IS OPEN TO CURRENT NEVADA AIR NATIONAL GUARD MEMBERS ONLY ***This is an open continuous announcement. The initial cutoff date will be 25 FEB 2025. Recruitment for this position will continue throughout the closing date until the position is filled.***
(1) Inspects a variety of airdrop equipment such as parachutes, multi loop lines, extraction transfer force couplings, latch assembly couplings, cable assembly couplings, actuator assembly, release cargo parachute M-1, lanyard arming wire, connector parachute, timer delay assembly, link lower
suspension, link assembly single suspension type IV, link assembly heavy duty, link 4 point, parachute release single knife, bracket suspension, and tie down cargo quick release.
(2) Performs airdrop inspections after priorities are set, work sequences are determined, and pertinent policy matters have been reviewed. Independently performs assignments at the aircraft where the supervisor is not readily available. Performs three separate inspections of airdrop loads
or containers rigged for airdrop prior to the actual airdrop.
(3) Rigs and prepares unilateral airdrop training loads to include type V or other airdrop platforms for airdrops. Fabricates container delivery systems loads, skid boards, and other associated airdrop items, as required. Receives, unpacks, and inspects unit possessed parachutes. Cleans, dries, inspects, and packs cargo parachutes after use. Maintains and repairs a variety of fabric, rubber, and leather articles. Operates and performs minor maintenance on sewing machines, punch presses, stenciling machines, and other similar equipment.
(4) Performs drop zone control operations as Drop Zone Controller/Safety Officer. Conducts weather observations, wind speed, direction determination, marking drop zone with navigation aids and timing points, establishing and maintaining air to ground and point to point radio communications, relaying information to aircraft and to the Range Control Officer.
(5) Formulates, implements, and documents programs to train Wing augmentation in support of Wing air transportation deployment functions to ensure effective and efficient operations of installation deployment processes. As a minimum, develops deployment lesson plans for the following areas: Material Handling Equipment (MHE) such as K-Loaders and forklifts, Load Planning Overview, Cargo Preparation/Pallet Build Up, Ramp Coordinator, Cargo Deployment Function work (i.e., In-Check, Cargo Marshalling Yard, Joint Inspection, Hazardous Cargo Handlers, Explosives Safety, Quality Control, and Load Teams) and the transportation portion of the Passenger Deployment Function.
(6) Provides sound advice and technical expertise on air transportation issues to the Installation Deployment Officer, all Squadron, Group, and Wing commanders. Provides hands-on training and classroom instruction for other service components in the area of load planning different airframes for unit deployments.
(7) Ensures items offered for transport by air meet proper specifications to maximize safety and security of the aircraft, aircrew, cargo and passengers. Plans, schedules, and trains Air Transportation Operations Element Drill Status Guardsmen on the inspection and operations of aircraft loading equipment; mobility/contingency functions (i.e., load planning, pallet buildup, cargo courier responsibility and hazardous cargo preparation); etc.
(8) Monitors and administrates data systems, within the technical and functional parameters and standards established by USTRANSCOM and in coordination with the Assistant Under Secretary of Defense for Transportation Policy, to integrate DOD transportation information worldwide and provide transportation and In-Transit Visibility (ITV) data for commanders at all levels.
(9) Analyzes operational plans, policies, and procedures for air terminal activities and facilities essential to air passenger and cargo movement processes. Serves as the Wing Commander's focal point for orchestrating daily and long-range utilization of the air terminal to ensure accomplishment of assigned missions as well as maximum support for deployment operations.
(10) Controls all aircraft cargo space allocated to each mission and is responsible for obtaining maximum utilization on each mission. Plans, selects, sequences, and monitors each aircraft cargo load and initiates and ensures all cargo manifests are prepared.
(11) Inspects cargo received for airlift to verify eligibility and ensures proper documentation, packaging, and marking in accordance with applicable DOD directives. Assembles and palletizes break bulk loads.
(12) Establish and maintains the installation Space Available air travel program. Reviews passenger travel authorizations for validity and accuracy. Checks in passengers, processes, schedules, transports, and escorts passengers to and from the aircraft.
(13) Serves as the wing focal point for 463L pallet and net management. Ensures accountability and required reports are submitted to NGB. Conducts periodical inspections to ensure serviceability of on hand pallets and nets within the wing.
(14) Performs other additional duties as assigned.
MILITARY REQUIREMENTS:
Compatible military grade and assignment required prior to the effective date of placement. In compliance with Title 32 United States Code, the compatible military skill set is determined by the applicable service manpower requirements. Upon selection, individuals are assigned to the authorized position and its compatible military skill in accordance with Air force skill classification directives, statutes, and National Guard Bureau regulations. The Dual Status technician must obtain and maintain all military skill requirements in regard to training, education, certifications, experience. If you are not sure you are eligible for military membership, please contact a National Guard recruiter prior to applying for this position.
Compatible Military Assignment:
ENLISTED: E3 to E6
COMPATIBLE DAFSC: 2T251 or 2T271
*Other Requirements & Conditions of Employment:
- National Guard Membership is required.
- Males born after 31 December 1959 must be registered for Selective Service.
- Federal employment suitability as determined by a background investigation.
- Must be able to obtain and maintain the appropriate security clearance of the position.
- May be required to successfully complete a probationary period.
- Must maintain local network access.
- Wear the uniform appropriate for the members' grade and component of the armed forces, maintaining standards of conduct and appearance.
- This position is covered by the Domestic Violence Misdemeanor Amendment (30 Sep 96) of the Gun Control Act (Lautenberg Amendment) of 1968. An individual convicted of a qualifying crime of domestic violence may not perform the duties of this position.
- Ability to establish effective professional working relationships with coworkers and customers, contributing to a cooperative working environment and successful accomplishment of the mission.
- May occasionally be required to work other than normal duty hours; overtime may be required.
-The duties and responsibilities of your job may significantly impact the environment. You are responsible to maintain awareness of your environmental responsibilities as dictated by legal and regulatory requirements, your organization, and its changing mission.
- For positions requiring the operation of motor vehicles, candidates must have a valid state driver's license.
There is no specific education requirement for this position. The applicant's record of experience and/or training must show possession of the knowledge, skills and abilities needed to fully perform the duties of the position.
You must provide transcripts or other documentation to support your Training/Educational claims. To receive credit for Training/Education, you must provide documentation of proof that you meet the Training/Education requirements for this position.
- If you are a male applicant who was born after 12/31/1959 and are required to register under the Military Selective Service Act, the Defense Authorization Act of 1986 requires that you be registered or you are not eligible for appointment in this agency (https://www.sss.gov/RegVer/wfRegistration.aspx).
- This is a Bargaining Unit position.
- Applicants who feel they have restoration rights to this position should contact the HRO.
- Military Incentives - Bonuses and Student Loan Repayment Program: If you are selected for this position, you may lose your eligibility for your National Guard Enlistment/Reenlistment Bonus and/or Student Loan Repayment Program incentives. In order to avoid losing your incentive eligibility, you should check with your incentives manager prior to accepting an offer for the position.
- Participation in Direct Deposit is mandatory.
AREA OF CONSIDERATION: In accordance with the State Merit Placement Plan, candidates will be considered in order of their area of consideration category as appropriate.
TERM POSITIONS: "Temporary-Not to Exceed" (TEMP) and "Temporary-Indefinite" (INDEFINITE) are considered to be TERM positions and are limited in duration to 4 years maximum. Employees reaching maximum TERM appointment limit of 4 years may be terminated.
CONVERSION OF TERM (TEMPORARY/INDEFINITE) POSITIONS: Positions advertised as TEMP or INDEFINITE may be non-competitively converted to INDEFINITE or PERMANENT without further competition at a future date contingent upon available funding. For TEMP PROMOTIONS, position may be non-competitively converted upon expiration of the incumbent's USERRA rights.
RECRUITMENT/RELOCATION INCENTIVE: Recruitment and/or Relocation incentives may be available, if eligible. Incentives are subject to funding availability and TAG-NV approval and are not guaranteed.
PERMANENT CHANGE OF STATION (PCS): PCS funding is NOT authorized. If you do not reside in the location of the position, you will be required to relocate at your own expense.
SELECTED RESERVE INCENTIVE PROGRAM: Acceptance of this position will cause termination of Federal bonuses pursuant to respective Selected Reserve Incentive Programs (SRIP). This termination may be with or without recoupment of payments already made.
You will be evaluated for this job based on how well you meet the qualifications above.
Once the application process is complete, we will review your resume to ensure you meet the hiring eligibility and qualification requirements listed in this announcement. You will be rated based on the information provided in your resume and responses to the Occupational Questionnaire, along with your supporting documentation to determine your ability to demonstrate the following knowledge, skills and abilities/competencies related to the job requirements:
1. Air Terminal Operations Center (ATOC) Knowledge: Demonstrated understanding of ATOC functions and operations, including the ability to plan, coordinate, facilitate, and expedite on-time movement of air cargo in accordance with applicable rules and regulations.
2. Load Planning Qualification: Possess/ability to possess load planning qualification currency to plan and compute load distribution using automated programs, manual methods, and/or other weight and balance computation methods. This includes knowledge of automated programs such as Integrated Computerized Deployment System (ICODES), to optimize aircraft space utilization.
3. JI Qualifications/Currency: Possess/ability to possess qualifications and currency in Joint Inspection (JI) processes. Knowledge in identify and eliminating malfunctions that may affect the safety of aircraft/crew, ensure a safe and proper drop of load from aircraft, and ensure items offered/accepted for transport by air meet proper specifications.
4. Rigger/Parachute Packer: Knowledge in or ability to possess qualification. Maintain a strong understanding of technical orders identifying proper rigging procedures and have the ability to rig loads of all types for airdrop, including preparation/packing/cleaning/resupply and repair of parachutes utilized for these drops.
5. Special Handling Competency: Demonstrated qualifications and competency in special handling procedures to handle, process, and ensure compatibility of hazardous materials being transported on aircraft meet all safety of flight requirements.
6. Training Skills: Ability to train traditional guard personnel in all aerial port functions, providing comprehensive instruction and guidance to develop their skills and knowledge in the field maintaining mission readiness.
7. Malfunction Analysis: Skill and ability to analyze and determine causes of malfunctions related to aerial drops, enabling effective troubleshooting and problem-solving to ensure safe and successful operations.
8. Drop Zone Control Operations: Knowledge of drop zone control operations, including the ability to direct and control drop zone activities to ensure efficient and safe operations.
If, after reviewing your resume and/or supporting documentation, a determination is made that you have inflated your qualifications and/or experience, your score may be adjusted to more accurately reflect your abilities or you may be found ineligible/not qualified. Please follow all instructions carefully. Errors or omissions may affect your rating or consideration for employment.
To apply for this position, you must submit a complete Application Package. Completed application package includes the following:
NOTE: Failure to submit a completed application package including the following required documentation will result in your application being disqualified.
1. Your resume: Your resume may be submitted in any format and must support the specialized experience described in this announcement. In describing your experience, please be clear and concise, we will not make assumptions regarding your experience. If your resume includes a photograph or other inappropriate material or content, it will not be used to make eligibility and qualification determinations and you may not be considered for this vacancy. NOTE: Copying directly from the vacancy announcement or position description may result in disqualification.
Education must be accredited by an accrediting institution recognized by the U.S. Department of Education in order for it to be credited towards qualifications. Therefore, provide only the attendance and/or degrees from schools accredited by accrediting institutions recognized by the U.S. Department of Education.
Failure to provide all of the required information as stated in this vacancy announcement may result in an ineligible rating or may affect the overall rating.
To apply for this position, you must complete the online application/Occupational Questionnaire and submit the documentation specified in the Required Documents section. To view the Occupational Questionnaire, click the following link: https://apply.usastaffing.gov/ViewQuestionnaire/12673219
A complete application package must be submitted by 11:59 PM Eastern Standard Time (8:59 PM Pacific Time) on the closing date of the announcement to receive consideration.
To begin, click Apply to access the online application. You will need to be logged into your USAJOBS account to apply. If you do not have a USAJOBS account, you will need to create one before beginning the application.
Follow the prompts to select your resume and/or other supporting documents to be included with your application package. You will have the opportunity to upload additional documents to include in your application before it is submitted. Your uploaded documents may take several hours to clear the virus scan process.
After acknowledging you have reviewed your application package, complete the Include Personal Information section as you deem appropriate and click to continue with the application process.
You will be taken to the Occupational Questionnaire which you must complete in order to apply for the position. Complete the Occupational Questionnaire, verify the required documentation is included with your application package, and submit the application.
To verify the status of your application, log into your USAJOBS account (https://my.usajobs.gov/Account/Login), all of your applications will appear on the Welcome screen. The Application Status will appear along with the date your application was last updated. For information on what each Application Status means, visit: https://www.usajobs.gov/Help/how-to/application/status/.
DO NOT Email applications directly to the HRO unless there are extenuating circumstances, Please Call the HRO contact listed in the event of extenuating circumstances.
Once your online application is submitted you will receive a confirmation notification by email. Your application will be evaluated by the Human Resources Office to determine your eligibility for the position. After the evaluation is complete, you will receive another notification regarding the status of your application.
The Federal hiring process is set up to be fair and transparent. Please read the following guidance.
This job originated on www.usajobs.gov. For the full announcement and to apply, visit www.usajobs.gov/job/829628600. Only resumes submitted according to the instructions on the job announcement listed at www.usajobs.gov will be considered.