Skip to main content
U.S. flag

PRODUCTION CONTROLLER

Department of the Army
Army National Guard Units
Nevada Army National Guard
This job announcement has closed

Summary

This position is for a PRODUCTION CONTROLLER, PD# D1255000, part of the Nevada Army National Guard. This position is located in the Joint Forces Headquarters State, Logistics Directorate (G-4),Surface Maintenance Facility. The purpose of this position is to perform maintenance production management, to achieve or maintain desired production levels, to serve as an equipment readiness expert for units supported by the facility.

Overview

Help
Reviewing applications
Open & closing dates
12/31/2024 to 01/08/2025
Salary
$61,203 to - $79,563 per year
Pay scale & grade
GS 9
Location
1 vacancy in the following location:
Las Vegas, NV
Remote job
No
Telework eligible
No
Travel Required
Occasional travel - You may be expected to travel for this position.
Relocation expenses reimbursed
No
Appointment type
Temporary promotion
Work schedule
Full-time
Service
Excepted
Promotion potential
None
Job family (Series)
Supervisory status
No
Security clearance
Secret
Drug test
No
Position sensitivity and risk
Noncritical-Sensitive (NCS)/Moderate Risk
Trust determination process
Financial disclosure
No
Bargaining unit status
Yes
Announcement number
NV-12656315-AR-24-165
Control number
826355800

This job is open to

Help

Clarification from the agency

THIS POSITION IS OPEN TO CURRENT ONBOARD TECHNICIANS ONLY. ***This is an open continuous announcement. The initial cutoff date for this position will be 07JAN2025. Recruitment for this position will continue through the closing date until the position is filled.***

Duties

Help

(1) Establishes plans and schedules for maintenance and repair, using multiple process production methods and procedures for a variety of vehicles and equipment such as combat vehicles, heavy-duty engineering and mobile equipment, tracked vehicles, towed and self-propelled artillery, communications and electronic equipment, guided missile systems, and small arms. Implements maintenance plans and monitors progress of accomplishments. Using readiness, production and management reports available from the current automation support program and/or manual system, provides status of equipment, maintenance actions in progress, and location of equipment as required or requested. Responsible for data input of work order information, status changes, supply updates, and other pertinent information. Makes on-the-spot adjustments to repair priorities
necessitated by unscheduled maintenance requirements.
(2) Ensures Modified Table of Organization and Equipment (MTO&E) or Table of Distribution and Allowances (TDA) reportable Line Item Numbers (LIN) are properly managed, reported and accounted for with respect to readiness reports, property accountability reports, and system management. Based on guidance received, prioritizes resources to ensure the highest level of readiness in support of training and mobilization requirements of supported units. Ensures that Army Materiel Status System (AMSS) equipment readiness reports are correct and submitted in a timely manner to meet Department of the Army (DA) reporting suspense.
(3) Programs workload, shop space, and available personnel on a short and long-term basis. Conducts initial and long range planning on matters which include multiple process production, maintenance operations, equipment readiness, including mechanical skills, availability of test and diagnostic equipment, repair parts, annual training requirements, mobilization requirements; and other factors influencing the repair, modification, and maintenance of equipment and readiness reporting.
(4) Ensures that unit Class 9 (CL IX) accounts are funded, budgeted, and executed to maximize readiness. Performs demand analysis on unit CL IX expenses to determine proper stockage to sustain unit mission requirements.
(5) Designates and maintains current maintenance priorities by Force Activity Designator, pacing items, Equipment Readiness Codes (ERC) A, B, and C equipment type, available funds, commander's priority, state/national priorities (in the case of floods, fires, and mobilizations), and unit supported. Using the current automation support system, authorizes the acceptance of equipment for repair; monitors work priorities, current status, and completion of work orders; requisitions and provides status of repair parts; and assures the effective utilization of maintenance personnel. Provides both standard and ad hoc reports on the status of work orders to the supervisor and/or units. Assists supervisory personnel regarding readiness, CL IX funding, production problems and work planning. Assists in the resolution of problems encountered between scheduled or unscheduled production or priority requirements.
(6) Analyzes repair methods and develops control procedures and policies to assure accomplishment of programs to meet priorities and deadlines established by higher authority or support activities. Ensures that this is performed in the most effective and efficient manner possible with good quality control and quality assurance procedures in place. Coordinates with units and other support activities concerning the delivery, status of repair operations, and/or pick up of completed work orders. Coordinates with logistical personnel, equipment specialists, higher ranked management officials, item managers at depots concerning critical shortages of repair parts required to support the maintenance repair program.
(7) Provides technical guidance and oversight to a lower-graded Production Controller. May provide guidance and oversight of mechanics, Tools and Parts Attendants, or other positions assisting in the maintenance production or maintenance management processes. Ensures necessary maintenance workers are available and that required reports are submitted to units and higher headquarters in a timely manner.
(8) Performs other duties as assigned.

Requirements

Help

Conditions of employment

MILITARY REQUIREMENTS:

Compatible military grade and assignment required prior to the effective date of placement.
In compliance with Title 32 United States Code, the compatible military skill set is determined by the applicable service manpower requirements. Upon selection, individuals are assigned to the authorized position and its compatible military skill in accordance with Army skill classification directives, statutes, and National Guard Bureau regulations. The Dual Status technician must obtain and maintain all military skill requirements in regard to training, education, certifications, experience. If you are not sure you are eligible for military membership, please contact a National Guard recruiter prior to applying for this position.

Compatible Military Assignment:
ENLISTED: E4 to E6
Compatible MOS: 92A

*Other Requirements & Conditions of Employment:
- National Guard Membership is required.
- Males born after 31 December 1959 must be registered for Selective Service.
- Federal employment suitability as determined by a background investigation.
- Must be able to obtain and maintain the appropriate security clearance of the position.
- May be required to successfully complete a probationary period.
- Must maintain local network access IAW AR 25-2.
- Wear the uniform appropriate for the members' grade and component of the armed forces, maintaining standards of conduct and appearance.
- This position is covered by the Domestic Violence Misdemeanor Amendment (30 Sep 96) of the Gun Control Act (Lautenberg Amendment) of 1968. An individual convicted of a qualifying crime of domestic violence may not perform the duties of this position.
- Ability to establish effective professional working relationships with coworkers and customers, contributing to a cooperative working environment and successful accomplishment of the mission.
- May occasionally be required to work other than normal duty hours; overtime may be required.
- The duties and responsibilities of your job may significantly impact the environment. You are responsible to maintain awareness of your environmental responsibilities as dictated by legal and regulatory requirements, your organization, and its changing mission.
- For positions requiring the operation of motor vehicles, candidates must have a valid state driver's license.

Qualifications

In order to qualify for this position, your resume must provide sufficient experience and/or education, knowledge, skills, and abilities, to perform the duties of the specific position for which you are being considered. Education requirement is based upon the qualification standards for the specific position and is stated under the heading "EDUCATION". Your resume is the key means we have for evaluating your skills, knowledge, and abilities, as they relate to this position. Therefore, we encourage you to be clear and specific in describing your experience. EACH APPLICANT MUST FULLY SUBSTANTIATE (IN THEIR OWN WORDS) THAT THEY MEET THE REQUIREMENTS OF THE SPECIALIZED EXPERIENCE LISTED BELOW; OTHERWISE, THE APPLICANT WILL BE CONSIDERED UNQUALIFIED FOR THIS POSITION. DO NOT COPY FROM THE VACANCY ANNOUNCEMENT OR THE POSITION DESCRIPTION OR YOU MAY BE DISQUALIFIED.

GENERAL EXPERIENCE: Must have experience, education or training which indicates the candidate can reason in quantitative terms, communicate orally and in writing in a clear and concise manner, understanding the terminology and data pertaining to repair operations and process characteristics of the production activity.

SPECIALIZED EXPERIENCE: Must have experience, education or training scheduling workflow in more than one area and responsible for coordinating products or materials from support activities. Experience in performing or supervising journeyman level work in a production facility. Experience preparing job or work orders; scheduling various phases of projects into the production facility; following up to see if work is progressing as planned and arranging for adjustments in materials, machine processes, and work sequencing allowing for changes. Experience with current automation support programs to input data, provide status of equipment, and monitor job order status, monitor work priorities, requisition repair parts, track repair parts status, etc.

Education

There is no specific education requirement for this position. The applicant's record of experience and/or training must show possession of the knowledge, skills and abilities needed to fully perform the duties of the position.

You must provide transcripts or other documentation to support your Training/Educational claims. To receive credit for Training/Education, you must provide documentation of proof that you meet the Training/Education requirements for this position.

Additional information

- If you are a male applicant who was born after 12/31/1959 and are required to register under the Military Selective Service Act, the Defense Authorization Act of 1986 requires that you be registered or you are not eligible for appointment in this agency (https://www.sss.gov/RegVer/wfRegistration.aspx).
- This is a Bargaining Unit position.
- Applicants who feel they have restoration rights to this position should contact the HRO.
- Military Incentives - Bonuses and Student Loan Repayment Program: If you are selected for this position, you may lose your eligibility for your National Guard Enlistment/Reenlistment Bonus and/or Student Loan Repayment Program incentives. In order to avoid losing your incentive eligibility, you should check with your incentives manager prior to accepting an offer for the position.
- Participation in Direct Deposit is mandatory.

AREA OF CONSIDERATION: In accordance with the State Merit Placement Plan, candidates will be considered in order of their area of consideration category as appropriate.

TERM POSITIONS: "Temporary-Not to Exceed" (TEMP) and "Temporary-Indefinite" (INDEFINITE) are considered to be TERM positions and are limited in duration to 4 years maximum. Employees reaching maximum TERM appointment limit of 4 years may be terminated.

CONVERSION OF TERM (TEMPORARY/INDEFINITE) POSITIONS: Positions advertised as TEMP or INDEFINITE may be non-competitively converted to INDEFINITE or PERMANENT without further at a future date contingent upon available funding. For TEMP PROMOTIONS, position may be non-competitively converted upon expiration of the incumbent's USERRA rights.

RECRUITMENT/RELOCATION INCENTIVE: Recruitment and/or Relocation incentives may be available, if eligible. Incentives are subject to funding availability and TAG-NV approval and are not guaranteed.

PERMANENT CHANGE OF STATION (PCS): PCS funding is NOT authorized. If you do not reside in the location of the position, you will be required to relocate at your own expense.

SELECTED RESERVE INCENTIVE PROGRAM: Acceptance of this position will cause termination of Federal bonuses pursuant to respective Selected Reserve Incentive Programs (SRIP). This termination may be with or without recoupment of payments already made.

How you will be evaluated

You will be evaluated for this job based on how well you meet the qualifications above.

Once the application process is complete, we will review your resume to ensure you meet the hiring eligibility and qualification requirements listed in this announcement. You will be rated based on the information provided in your resume and responses to the Occupational Questionnaire, along with your supporting documentation to determine your ability to demonstrate the following knowledge, skills and abilities/competencies related to the job requirements:

  • Establishes plans, schedules, and controls the maintenance and repair of a variety of vehicles and equipment such as combat vehicles, heavy-duty engineering and mobile equipment, tracked vehicles, communications and electronic equipment, and small arms. Provides status of equipment, maintenance actions in progress, and location of equipment. Inputs data regarding work order information, status changes, supply updates, and other pertinent information. Makes on-the-spot adjustments to repair priorities on routine or reoccurring processes necessitated by unscheduled maintenance requirements.
  • Authorizes the acceptance of equipment for repair; monitors work priorities, status, and completion of work orders and requisitions; and provides status of repair parts. Assists supervisory personnel regarding readiness, Class 9 (CL IX) funding, production problems and work planning.
  • Based on guidance received from the supervisor or higher graded production controller, prioritizes resources to ensure the highest level of readiness in support of training and mobilization requirements of supported units.
  • In the absence of the higher graded production controller, ensures that unit CL IX accounts are funded, budgeted, and executed to maximize readiness; and performs demand analysis on CL IX expenses to determine proper Shop Stock to sustain facility mission requirements.
If, after reviewing your resume and/or supporting documentation, a determination is made that you have inflated your qualifications and/or experience, your score may be adjusted to more accurately reflect your abilities or you may be found ineligible/not qualified. Please follow all instructions carefully. Errors or omissions may affect your rating or consideration for employment.

Your session is about to expire!

Your USAJOBS session will expire due to inactivity in 8 minutes. Any unsaved data will be lost if you allow the session to expire. Click the button below to continue your session.