This job originated on www.usajobs.gov. For the full announcement and to apply, visit www.usajobs.gov/job/466966700. Only resumes submitted according to the instructions on the job announcement listed at www.usajobs.gov will be considered.
About the Position:
This position is located in the Mechanical-Electrical Section, Engineering Branch, Engineering and Construction Division, US Army Corps of Engineers, Norfolk District. The employee serves as Chief of the Mechanical and Electrical Section. The incumbent supervises, controls and is responsible for a wide variety of mechanical and electrical engineering work for the Norfolk District. This position is located in Norfolk, VA.
Only applicants who meet one of the employment authority categories below are eligible to apply for this job. You will be asked to identify which category or categories you meet, and to provide documents which prove you meet the category or categories you selected. See Proof of Eligibility for an extensive list of document requirements for all employment authorities.
04/04/2017 to 04/25/2017
$85,816 - $111,560 per year
GS 13
1 vacancy in the following location:
Occasional travel - Business travel may be up to 10%
Yes—Permanent Change of Station (PCS) may be offered, subject to the availability of funds.
Permanent
Full-time - Full Time
Yes
SCER172963911936610
466966700
Other Requirements: Click here for expanded definitions.
In order to qualify, you must meet the education and/or experience requirements described below. Your resume must clearly describe your relevant experience; all applicants must submit a copy of their transcripts or other documents to verify basic education requirements. Additional information about transcripts is in this document.
THIS POSITION HAS A POSITIVE EDUCATION REQUIREMENT: YOU MUST SUBMIT COPIES OF YOUR TRANSCRIPTS. UNOFFICIAL TRANSCRIPTS WILL BE ACCEPTED WITH YOUR APPLICATION BUT SELECTEES WILL BE REQUIRED TO SUBMIT OFFICIAL TRANSCRIPTS BEFORE ENTRANCE ON DUTY
Basic requirements for Mechanical Engineer, GS-0830 or Electrical Engineer, GS-0850, (NOTE ALL APPLICANTS IN THIS SERIES MUST PROVIDE A COPY OF THEIR COLLEGE TRANSCRIPTS):
A. Degree: Bachelor's degree (or higher degree) in engineering. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher degree) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); OR (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.
OR
B. Combination of Education and Experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:
1. Professional registration or licensure - Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.
2. Written Test - Evidence of having successfully passed the Fundamentals of Engineering (FE) examination, or any other written test required for professional registration, by an engineering licensure board in the various States, the District of Columbia, Guam, or Puerto Rico.
3. Specified academic courses - Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in A above. The courses must be fully acceptable toward meeting the requirements of an engineering program.
4. Related curriculum - Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions.
Transcripts must be submitted with application.
In addition to meeting the basic requirement above, to qualify for this position you must also meet the qualification requirements listed below:
Experience required:
Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student; social). You will receive credit for all qualifying experience, including volunteer experience.
To qualify based on your experience, your resume must describe at least one year of experience which prepared you to do the work in this job. Specialized experience is defined as: Work performed for one year equivalent to the GS-12 level in the Federal service that demonstrates experience in the development of mechanical and/or electrical engineering work to support multi-discipline projects to include the design disciplines of architecture, civil engineering, mechanical engineering, and/or electrical engineering.
You will be evaluated on the basis of your level of competency (knowledge, skills, abilities) in the following areas:
Selective Placement Factors:
This position requires that the incumbent be:
1. Registered as a professional engineer by any State, the District of Columbia, Guam, or Puerto Rico. Applicants must provide a copy of their current valid registration in order to be considered for this position.
Time in Grade Requirement:
Applicants who have held a General Schedule (GS) position within the last 52 weeks must have 52 weeks of Federal service at the next lower grade (or equivalent) at the time of the announcement closing.
Some federal jobs allow you to substitute your education for the required experience in order to qualify. For this job, you must meet the qualification requirement using experience alone--no substitution of education for experience is permitted.
You will be evaluated for this job based on how well you meet the qualifications above.
Your application package (resume, supporting documents, and responses to the questionnaire) will be used to determine your eligibility, qualifications, and quality ranking for this position. Please follow all instructions carefully. Errors or omissions may affect your rating or consideration for employment.
Interagency Career Transition Assistance Program (ICTAP). If you are a Federal employee in the competitive service and your agency has notified you in writing that you are a displaced employee eligible for ICTAP consideration, you may receive selection priority. See Interagency Career Transition Assistance Program (ICTAP) for more information. Additional information about the program is on OPM's Career Transition Resources website.
The documents you are required to submit vary based on the authority you are using to apply (i.e., applying as a veteran, applying as a current permanent Federal employee, applying as a reinstatement, etc). Please review the following links to see which documents you need to provide to prove your eligibility to apply: Applicant Merit Checklist and Proof of Eligibility.
As described above, your complete application includes your resume, your responses to the online questionnaire, and documents which prove your eligibility to apply. If you fail to provide these documents, you will be marked as having an incomplete application package and you will not be considered any further.
Your resume:
If you are relying on your education to meet qualification requirements: You MUST submit a copy of your transcript if you want to substitute your education for experience. If you claim qualifications based on education, and do not submit a transcript, your education will not be used in making a qualification determination and you may be found "not qualified." See: Transcripts and Licenses
Proof of Eligibility to Apply: Your application must include the documents which prove you are eligible to apply for the vacancy. The Proof of Eligibility document describes authorities commonly used in merit promotion recruitment and what document(s) are required to prove you meet the requirements of the authority. You must meet the requirements of at least one of the authorities listed in the Who May Apply section above to receive further consideration.
If you are unable to apply online or unable to upload your supporting documents follow the directions located at: Faxing Applications and Documents The Vacancy ID is 1936610. You will need the questionnaire, View Occupational Questionnaire, to complete your faxed application.
NOTE: Documents submitted as part of the application package, to include supplemental documents, may be shared beyond the Human Resources Office. Some supplemental documents such as military orders and marriage certificates may contain personal information for someone other than you. You may sanitize these documents to remove another person's personal information before you submit your application. You may be asked to provide an un-sanitized version of the documents if you are selected to confirm your eligibility.
Education must be accredited by an accrediting institution recognized by the U.S. Department of Education in order for it to be credited towards qualifications. Therefore, provide only the attendance and/or degrees from schools accredited by accrediting institutions recognized by the U.S. Department of Education.
Failure to provide all of the required information as stated in this vacancy announcement may result in an ineligible rating or may affect the overall rating.
To apply for this position, you must complete the online questionnaire and submit the documentation specified in the Required Documents section below.
The complete application package must be submitted by 11:59 PM (EST) on Tuesday, April 25, 2017 to receive consideration.
The Department of the Army provides reasonable accommodations to applicants with disabilities. If you need a reasonable accommodation for any part of the application and hiring process, please notify the servicing civilian personnel unit. Your requests for reasonable accommodation will be addressed on a case-by-case basis.
If you provided an email address, you will receive an email message acknowledging receipt of your application. Your application package will be used to determine your eligibility, qualifications, and quality ranking for this position. If you are determined to be ineligible or not qualified, your application will receive no further consideration.
The documents you submit must support your responses to the online questionnaire. If your application contradicts or does not support your questionnaire responses, you will receive a rating of "not qualified" or "incomplete application" and you will not receive further consideration for this job.
The Federal hiring process is set up to be fair and transparent. Please read the following guidance.
This job originated on www.usajobs.gov. For the full announcement and to apply, visit www.usajobs.gov/job/466966700. Only resumes submitted according to the instructions on the job announcement listed at www.usajobs.gov will be considered.
Learn more about
Looking for a great place to work? The U.S. Army Corps of Engineers (USACE or "The Corps") is one of the best in America! In 2015, USACE ranked #128 out of 500 employers on Forbes' "America's Best Employers" list. From this list, the Corps ranked #10 in the government services industry, #6 in the federal government, and #8 in the engineering field. Follow this link for more information about the U.S. Army Corps of Engineers.
Civilian employees serve a vital role in supporting the Army mission. They provide the skills not readily available in the military, but crucial to support military operations. The U.S. Army Corps of Engineers is an innovative, transformative organization providing engineering solutions to customers worldwide. Working at the Corps as a civilian employee means making a direct contribution to war fighters and their families; supporting overseas contingency operations; developing technology and systems that save the lives of soldiers and civilians; providing disaster relief; and protecting and enhancing the environment and the national economy.