This job originated on www.usajobs.gov. For the full announcement and to apply, visit www.usajobs.gov/job/464679800. Only resumes submitted according to the instructions on the job announcement listed at www.usajobs.gov will be considered.
THIS POSITION IS A TITLE 32 FEDERAL EXCEPTED INDEFINITE TECHNICIAN POSITION. YOU MUST BE OR BECOME A MILITARY MEMBER IN THE NEW HAMPSHIRE NATIONAL GUARD.
Current technicians selected will retain the appointment status they are currently in. (i.e., Permanent or Indefinite) and will be placed on a temporary promotion (or other appropriate personnel action) if selected for this position. Individuals from Area II or Area III will be appointed indefinite status. Conversion to permanent status
for all actions pertaining to this announcement may be accomplished if funding and positions are made available.PLEASE NOTE: ACCEPTANCE OF A MILITARY FEDERAL TECHNICIAN POSITION MAY RESULT IN TERMINATION AND / OR REPAYMENT OF MILITARY INCENTIVES. PLEASE CHECK YOUR CONTRACT AND CONTACT YOUR SERVICING EDUCATION SERVICES (INCENTIVES) OFFICE OR THE RECRUITING/RETENTION OFFICE.
NATIONAL GUARD MEMBERSHIP IS REQUIRED: This is a Title 32 federal technician excepted position that requires membership in a compatible military assignment in the National Guard . Selectee will be required to wear the military uniform.
Acceptance of an excepted position constitutes concurrence with these requirements as a condition of employment. Applicants who are not currently a member of the National Guard must be eligible for immediate military membership and employment in the National Guard in the military grade listed in this announcement.
Individuals selected for a Dual Status Excepted Service position who are not already in the appropriate NH National Guard organization will have thirty days to be appointed/enlisted.
This position is located within a National Guard aircraft maintenance organization.
Open Areas of Consideration: Areas 1, 2, and 3
DEFINITION OF AREA(S) OF CONSIDERATION:
Area 1 = permanent or indefinite technicians currently employed with the New Hampshire National Guard.
Area 2 = AGRs or traditional/M-Day soldiers and airmen currently serving in the New Hampshire National Guard.
Area 3
= all individuals eligible for immediate membership in the New Hampshire National Guard as a military member, in the grade/rank listed in this announcement. (NOTE: Please call 603-430-3508 to ensure you are eligible to immediately enlist in the NH Air National Guard as a military member, in the grade/rank listed in this announcement BEFORE applying for this position) Learn more about this agency02/28/2017 to 03/27/2017
$26.77 - $34.70 per hour
WG 08 - 10
3 vacancies in the following location:
Not required
No
Temporary - Indefinite
Full-time - Full Time
No
NH17-T007-1918223
464679800
The primary purpose of the position is to inspect, repair, modify, and service aircraft systems, components, and assemblies, both on and off aircraft.
Position Description Number: D1366000
OTHER PERTINENT DATA
This vacancy will be processed in accordance with NHNG TPR 335 & Article 16 of the Labor Management Agreement. Military compatibility and grade inversion rules will be strictly adhered to. In order to comply with the NGB compatibility criteria, selected individual will be immediately assigned to compatible military assignment.
THE FILLING OF THIS POSITION IS SUBJECT TO THE AVAILABILITY OF MANPOWER SPACE.
Reimbursement for PERMANENT CHANGE OF STATION (PCS) expenses is not authorized.
Selected individual must enroll in the Direct Deposit/Electronic Funds Transfer Program. The Federal Financial Management Act of 1994, SEC 402, Electronics Payments, requires direct deposit to a financial institution for all Federal wage or salary payments.
If you are a male born after 31 December 1959, and you desire employment with the Federal Government, you must be registered with Selective Service.
The Enlistment/Reenlistment Bonus, Student Loan Repayment Program incentive, and Selected Reserve Recruitment Health Care Professionals incentive will be terminated upon start date for a military technician position or AGR Title 10 or Title 32 tour. Recoupment may be required depending on the specific incentive contract recoupment procedures.
If you are an AGR and are selected for this position, you will be required to terminate your AGR tour prior to placement into this position.
Participation in direct deposit is mandatory.
MINIMUM REQUIREMENTS: Experience or training that has provided you with the skill to remove and replace aircraft parts, accessories, and components, and to make adjustments and settings according to established specifications. Must be skilled in the use of hand tools and test equipment.
SPECIALIZED EXPERIENCE: (WG-10) - Must have at least 18 months of experience in installing, adjusting, aligning, troubleshooting and functionally testing the various major and minor mechanical and pneudraulic systems on an aircraft during overhaul or modification; Experience coordinating the work of other mechanics, and scheduling maintenance to ensure completion of critical actions and optimum workflow; The ability to instruct lower graded mechanics, military and other personnel in the disassembly and re-assembly of crash damaged engines, transmissions, gearboxes, hydraulic components, and fuel controls sufficient for the exhibit to be returned to its shipping container.
SPECIALIZED EXPERIENCE: (WG-08) - Must have at least 12 months of experience in the use of common hand tools to make mechanical repairs; Experience removing and installing aircraft parts, components and accessories with detailed guidance; Experience in following detailed instructions in making routine, reoccurring repairs and modifications to aircraft parts, subassemblies and components, e.g. such as jacking and leveling aircraft, installing and adjusting engines, landing gear assemblies, instrument panels, and flight control systems.
KSA's:
- Knowledge of the makeup, operation, and installation of a variety of systems, assemblies, and surfaces.
- Knowledge to determine when new surfaces, assemblies, and systems should be installed, or repaired through replacement of new parts and components.
- Knowledge of types and extent of adjustments and alignments required.
- Skill in the removal, replacement and adjustment of various systems assemblies, and surfaces or any of their components and parts.
- Skill in connecting, meshing and adjusting surfaces, assemblies, and systems with one another.
- Knowledge and skill to use precision test equipment, technical data, schematics, wiring diagrams, mathematical formulas, common hand tools, jigs, templates, and various gauges.
MILITARY REQUIREMENTS: Selected candidates will be required to be in a compatible military grade and assignment prior to the effective date of placement.
Military Grades: E3 to E7
Selectee(s) must be within the military grade(s) listed in this job announcement prior to the effective date of placement into the technician position.
Applicant(s) who are over grade must clearly state, in their resumes, their intentions to willingly take a reduction in grade.
Compatible Military Assignments: 2A3X3, 2A3X8, 2A5X1, 2A5X2, 2A5X4, 2A8X1, 2A8X2C, 2A8X1C, 2A8X1E, 2A8X2E
It is not necessary for applicants to possess the MOS/AFSC listed as compatible to the position in order to apply. It is, however, the applicant's responsibility to acquire a compatible MOS/AFSC within 1 year of appointment. Coordinate with your unit's training representative to determine whether or not you can qualify for a specific MOS/AFSC and/or receive training.
1. If you are a male applicant who was born after 12/31/59 and are required to register under the Military Selective Service Act, the Defense Authorization Act of 1986 requires that you be registered or you are not eligible for appointment in this agency.
2. Please do not send/fax/courier/email any applications or resumes to the New Hampshire National Guard Human Resources Office, you must apply on-line or fax your application to the fax number listed on this announcement with the prescribed Cover Letter. The Human Resource can only process materials received through USA Jobs.
You will be evaluated for this job based on how well you meet the qualifications above.
Once the application process is complete, a review of your application will be made to ensure you meet the job requirements. To determine if you are qualified for this job, a review of your resume and supporting documentation will be made and compared against your responses to the occupational questionnaire. The rating you receive is based on your responses to the questionnaire and supporting documents.
If, after reviewing your resume and/or supporting documentation, a determination is made that you have inflated your qualifications and/or experience, your score can and will be adjusted to more accurately reflect your abilities. Please follow all instructions carefully. Errors or omissions may affect your rating.
For this job announcement the following documents are required:
Current Resume
Prior Federal Employees must submit last SF 50.
For this job announcement the following documents are
suggested (these are only suggestions and not required for your application to be complete):
To submit the documents requested follow the instructions below: Your resume, curriculum vitae, the Optional Application for Federal Employment (OF 612), or any other written format you choose to describe your job-related qualifications. Your document(s) can be submitted electronically using the document upload process or by fax. Please ensure that your resume contains your full name, address, phone and your e-mail address.
Education must be accredited by an accrediting institution recognized by the U.S. Department of Education in order for it to be credited towards qualifications. Therefore, provide only the attendance and/or degrees from schools accredited by accrediting institutions recognized by the U.S. Department of Education.
Failure to provide all of the required information as stated in this vacancy announcement may result in an ineligible rating or may affect the overall rating.
To apply for this position, you must provide both of the following parts:
1. Your responses to the Qualifications Questionnaire, and
2. Your resume and any other documents specified in the Required Documents section (see below) of this job announcement.
Use the Online Qualifications Questionnaire for convenience and quickest processing.
(Here is a link for aiding you in building your Resume):
http://www.usajobs.gov/ResourceCenter/Index/Interactive/ResumeAndApplicationTips#icc
(Ten Tips for Letting Federal Employers Know Your Work):
http://www.usajobs.gov/ResourceCenter/Index/Interactive/TenTips#icc
Option A: Online Qualifications Questionnaire.
Tips for using the Online Qualifications Questionnaire:
· You must click both Finish and Submitwhen you are done. Your Online Qualifications Questionnaire is not processed and your résumé is not attached until you click the Submit button, even if USAJOBS says it sent your résumé.
· You can upload or fax supporting documents after you Submit the Online Qualifications Questionnaire.
· You must complete the entire process by the closing date -- Monday, March 27, 2017
· To make sure everything you submitted is successfully received, follow these steps:
1. Go to
https://applicationmanager.gov/ and log in using an existing account or create an account if you do not have an existing account.2. Click the radio button for this Vacancy Identification Number: 1918223. Click Select a Vacancy.
3. Verify that all of your documents appear on the table with a status of Processed.
· You can save your work and come back later. Just click both Save and Logout. (When you want to return, go to https://applicationmanager.gov and log in using the box on the right hand side of the page.)
· If you Submit more than one Qualifications Questionnaire for this position, the most recent one Submitted is the one that is used. Therefore, it is important for you to complete it in its entirety.
To begin your Online Qualifications Questionnaire, choose one of these options:
· If your résumé is going to come from the USAJOBS Resume Builder, you begin the process by clicking the Apply Online button near the bottom of this page. Your résumé will be attached only to the Online Qualifications Questionnaire you complete and Submit from this session, not to any Questionnaires you may already have Saved or Submitted.
· If your résumé is going to be one you prepared outside of USAJOBS Résumé Builder, click this link to begin the process: Online Questionnaire.
Option B: Paper Qualifications Questionnaire.
If it is not practical for you to use the Online Qualifications Questionnaire, you can write your answers on paper. Follow these steps:
1. You can print a copy of this job announcement so that you can read the questions offline.
2. Obtain and print a copy of the OPM Form 1203-FX, which you will use to provide your answers. You can obtain the form at this URL http://www.opm.gov./Forms/pdf_fill/OPM1203fx.pdf
3. You may submit the Form 1203-FX, resume, and any supporting documents by fax to USA Staffing and they will upload it for you.
· By Fax: If you are faxing a Form 1203-FX, you do not need a separate cover sheet. Simply make sure the Form 1203-FX is on top of any other documents you are faxing. If you are faxing any documents without the Form 1203-FX on top, always use the official cover sheet which is here -- http://staffing.opm.gov/pdf/usascover.pdf -- and be sure to fill it out completely and clearly. The fax number is 1-478-757-3144. Feed all documents into your fax machine top first so that we receive them right-side up.
The Federal hiring process is set up to be fair and transparent. Please read the following guidance.
This job originated on www.usajobs.gov. For the full announcement and to apply, visit www.usajobs.gov/job/464679800. Only resumes submitted according to the instructions on the job announcement listed at www.usajobs.gov will be considered.
Learn more about
NEW HAMPSHIRE NATIONAL GUARD
MILITARY TECHNICIAN VACANCY ANNOUNCEMENT