This job originated on www.usajobs.gov. For the full announcement and to apply, visit www.usajobs.gov/job/810431300. Only resumes submitted according to the instructions on the job announcement listed at www.usajobs.gov will be considered.
About the Position: For this announcement DAFN244334947905 current Flexible Length Modified Renewable Term (FLMRT) employees MUST apply under the Reinstatement eligibility to be considered. This position is also being filled under announcement number DAFN244334945745 for current permanent Department of Army Civilian Employees. If you are a current permanent Department Army Civilian, you must apply under announcement number DAFN244334945745 to be considered.
Learn more about this agency09/23/2024 to 10/04/2024
$191,900 - $204,000 per year
DB 5
1 vacancy in the following location:
No
Yes—as determined by the agency policy.
25% or less - Business travel required up to 20% of the time.
No
Term - This position is to be filled as a TERM position Not-to-Exceed (NTE) 5 Years. Can be made permanent without further competition.
Full-time
Competitive
None
No
No
Yes
DAFN244334947905
810431300
Federal employees who meet the definition of a "surplus" or "displaced" employee.
See "Who May Apply" in the "Qualifications" section for more information on who is eligible to apply for this position.
Who May Apply: Only applicants who meet one of the employment authority categories below are eligible to apply for this job. You will be asked to identify which category or categories you meet, and to provide documents which prove you meet the category or categories you selected. See Proof of Eligibility for an extensive list of document requirements for all employment authorities.
Basic Education Requirement:
A. Degree: Bachelor's degree (or higher degree) in engineering. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher degree) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); OR (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.
NOTE: You MUST submit a copy of your transcripts.
OR
B. Combination of Education and Experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:
1. Professional registration or licensure- Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.
2. Written Test - Evidence of having successfully passed the Fundamentals of Engineering (FE) examination, or any other written test required for professional registration, by an engineering licensure board in the various States, the District of Columbia, Guam, or Puerto Rico.
3. Specified academic courses- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in A above. The courses must be fully acceptable toward meeting the requirements of an engineering program.
4. Related curriculum- Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. (You MUST submit a copy of your transcripts along with a letter of reference stating that you have at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. The letter must be signed by the engineer who provided the professional engineer supervision. It must also include their name, phone number, and list their engineer credentials such as engineer education or professional certificates).
NOTE: An applicant who meets the basic requirements as specified in A or B above, except as noted under B.1., may qualify for positions in any branch of engineering unless selective factors indicate otherwise.
In addition to meeting the basic requirement above, to qualify for this position you must also meet the qualification requirements listed below:
To qualify at the DB-05/Greater than GS-15 equivalent grade level: Your resume must clearly describe at least one year of specialized experience equivalent to the DB-04 pay band or equivalent grade level (GS-14/15) level in the Federal service which includes; Experience in evaluating, reviewing, and approving coordinated programs to ensure the orderly integration, coordination, and balance of major technical events; Experience in monitoring programming, funding, resources, and deployment requirements across multiple organizations, and/or Experience leading projects or teams in the design, research, development, testing, production and maintenance in ground vehicles.
This definition of specialized experience is typical of work performed at the next lower grade/level position in the federal service (DB-04 pay band or equivalent grade level (GS-14/15)).
This position is part of the Combat Capabilities Development Command (CCDC) Ground Vehicle Systems Center (GVSC), Science and Technology Reinvention Laboratory Personnel Management Demonstration Project. CCDC Ground Vehicle Systems Center (GVSC) is participating in an alternative personnel system known as the Personnel Management Demonstration Projection. The DB-05 pay band includes positions classified above the GS-15 level.
You will be evaluated on the basis of your level of competency in the following areas:
Some federal jobs allow you to substitute your education for the required experience in order to qualify. For this job, you must meet the qualification requirement using experience alone--no substitution of education for experience is permitted.
***NOTE: TRANSCRIPTS ARE REQUIRED even if you are a current federal employee.***
Only degrees from an accredited college or university recognized by the Department of Education are acceptable to meet positive education requirements or to substitute education for experience. For additional information, please go to the Office of Personnel Management (OPM) and U.S. Department of Education websites at - http://www.opm.gov/qualifications and http://www.ed.gov/admins/finaid/accred/index.html
FOREIGN EDUCATION: If you are using education completed in foreign colleges or universities to meet the qualification requirements, you must show the education credentials have been evaluated by a private organization that specializes in interpretation of foreign education programs and such education has been deemed equivalent to that gained in an accredited U.S. education program; or full credit has been given for the courses at a U.S. accredited college or university. For further information, visit: https://sites.ed.gov/international/recognition-of-foreign-qualifications/.
You will be evaluated for this job based on how well you meet the qualifications above.
Once the announcement has closed, a review of your application package (resume, supporting documents, and responses to the questionnaire) will be used to determine whether you meet the qualification requirements listed on this announcement. If you are minimally qualified, your resume and supporting documentation will be compared against your responses to the assessment questionnaire to determine your level of experience. If, after reviewing your resume and/or supporting documentation, a determination is made that you have inflated your qualifications and/or experience, you may lose consideration for this position. Please follow all instructions carefully when applying, errors or omissions may affect your eligibility.
You should list any relevant performance appraisals and incentive awards in your resume as that information may be taken into consideration during the selection process. If selected, you may be required to provide supporting documentation.
You may claim Military Spouse preference.
Military Spouse Preference (MSP) applicants will receive preference consideration and will be placed (if selected) at the highest grade for which they have applied and are determined best qualified, up to and including the full performance level.
You may claim Priority Placement Program (PPP) preference.
DoD Priority Placement Program (PPP) Applicants will receive preference consideration at the full-performance grade level only.
Only MSP/PPP applicants currently occupying a formal training program position are entitled to exercise their priority status.
Interagency Career Transition Assistance Program (ICTAP). If you are a Federal employee in the competitive service and your agency has notified you in writing that you are a displaced employee eligible for ICTAP consideration, you may receive selection priority for this position. To receive selection priority, you must: (1) meet ICTAP eligibility criteria (2) be rated well-qualified for the position and; (3) submit the appropriate documentation to support your ICTAP eligibility. To be considered well-qualified and receive selection priority applicants must satisfy all qualification requirements for the position and receive a score of 90 or above. Additional information about the program is on OPM's Career Transition Resources website.
The documents you are required to submit vary based on the authority you are using to apply (i.e., applying as a veteran, applying as a current permanent Federal employee, applying as a reinstatement, etc). Please review the following links to see which documents you need to provide to prove your eligibility to apply: Applicant Checklist for Internal/Merit Promotion Announcements.
As described above, your complete application includes your resume, your responses to the online questionnaire, and documents which prove your eligibility to apply. If you fail to provide these documents, you will be marked as having an incomplete application package and you will not be considered any further.
1. Your resume:
Education must be accredited by an accrediting institution recognized by the U.S. Department of Education in order for it to be credited towards qualifications. Therefore, provide only the attendance and/or degrees from schools accredited by accrediting institutions recognized by the U.S. Department of Education.
Failure to provide all of the required information as stated in this vacancy announcement may result in an ineligible rating or may affect the overall rating.
To apply for this position, you must complete the online questionnaire and submit the documentation specified in the Required Documents section above.
The complete application package must be submitted by 11:59 PM (EST) on10/04/2024 to receive consideration.
If you provided an email address, you will receive an email message acknowledging receipt of your application. Your application package will be used to determine your eligibility, qualifications, and quality ranking for this position. If you are determined to be ineligible or not qualified, your application will receive no further consideration.
The Federal hiring process is set up to be fair and transparent. Please read the following guidance.
This job originated on www.usajobs.gov. For the full announcement and to apply, visit www.usajobs.gov/job/810431300. Only resumes submitted according to the instructions on the job announcement listed at www.usajobs.gov will be considered.
Learn more about
Civilian employees serve a vital role in supporting the Army mission. They provide the skills that are not readily available in the military, but crucial to support military operations. The Army integrates the talents and skills of its military and civilian members to form a Total Army.
The Army values diversity of perspectives, backgrounds, cultures and skills, which connects employees to organizations that are committed to building an inclusive work environment where they can contribute to their fullest potential.
Serves as the Senior Scientific Technical Manager (SSTM) Chief Engineer for Ground System Electronic Architecture within the US Army Combat Capabilities Development Command (DEVCOM) Ground Vehicle Systems Center (GVSC), located in Warren, Michigan.
The United States Army Combat Capabilities Development Command (DEVCOM) Ground Vehicle Systems Center (GVSC), located in Warren, Michigan is the U.S. Armed Forces' research and development facility for advanced technology in ground systems. The U.S. Army DEVCOM is a major subordinate command of the United States Army Futures Command (AFC). Current technology focus areas in the Ground Vehicle Systems Center (GVSC) include Power and Mobility, Autonomous Systems, Force Projection, Survivability and Protection, Electronics and Architecture, Cyber Engineering and Software Integration.