This job originated on www.usajobs.gov. For the full announcement and to apply, visit www.usajobs.gov/job/810137900. Only resumes submitted according to the instructions on the job announcement listed at www.usajobs.gov will be considered.
THIS IS AN ARMY NATIONAL GUARD TITLE 32 EXCEPTED SERVICE POSITION
UNIT: FMS #3
LOCATION: NEW BRIGHTON, RAMSEY, MN
SELECTING OFFICIAL: CW2 Szuberski, Aaron 651-282-4469
ARMY NATIONAL GUARD MEMBERSHIP IS REQUIRED
09/18/2024 to 10/22/2024
$30.58 - $38.80 per hour
WG 8 - 10
1 vacancy in the following location:
No
No
Occasional travel - You may be expected to travel for this position.
No
Permanent
Full-time
Excepted
10
No
Yes
No
MN-12552561-24-653
810137900
Current members, those who want to join or transitioning military members.
United States Citizens, National Guard
Major Duties: This is not an all-inclusive list
A ELECTRONICS MECHANIC, WG-2604-8/10, (1) Performs troubleshooting and routine repairs on individual components and moderately complex systems of launch pod/containers (LP/C), trainer rocket simulator modules, Missiles/Launchers Pod Assemblies (M/LPA), trainer missile simulator modules, and various like items. Troubleshoots carrier electrical and power distributions systems components of the weapon system or equipment being repaired. Isolates faulty assemblies, cables, wiring harnesses and modules to component level for repair or replacement. Performs initial and final checks and may perform inspections when required on equipment being repaired. (2) Performs functional tests, analyzes performance and malfunctions, removes, installs, tests, maintains, modifies, performs alignments and troubleshoots the electronic, electrical, modules, and interconnecting cables of a variety of combat and tactical, and communication equipment. This equipment has moderate or limited complexity to include multichannel very high frequency (VHF) or ultra high frequency (UHF) transmitters or receivers, power supplies, and multilayered printed circuit boards. Repairs or replaces chassis mounted components on Unit Under Test (UUT). Performs Automatic Test Equipment (ATE) operations for fault isolation on electronic modules, circuit cards and assemblies, and similar items to component level. Replaces faulty components on UUT printed circuit boards and power distribution systems. Utilizes oscilloscopes, signal generators, digital multi-meters, and other test equipment to locate, diagnose, and repair malfunctions. (3) Performs field and limited sustainment maintenance to include installation, routine maintenance, repair, and overhaul of fixed and mobile operational communication and electronics systems, e.g., shelter mounted AM radio and teletype systems, shelter mounted single side band radio and teletype systems, shelter mounted radio relay and terminal systems, other moderately complex systems, peripheral equipment, and related test equipment, and Modification Table Of Equipment (MTOE) authorized automation equipment. Repairs, aligns, and adjusts infrared night vision sights, optical sights, and traversing units. Removes and replaces defective electrical, electronic, and mechanical components. Conducts inspections, diagnoses nature and extent of equipment malfunction. Determines whether equipment may be economically repaired or declared unserviceable. Performs required maintenance to restore to a serviceable condition various types of tactical computers, radio sets, and similar items. Repairs or recommends for salvage defective components or assemblies. Isolates and diagnoses cause of circuit/component malfunction using signal string lists, schematics, standard, special and electronic Test Measurement and Diagnostic Equipment (TMDE) or repair equipment. Uses associated field maintenance equipment in analytical maintenance procedures. Installs and applies equipment modifications when directed. (4) Uses various types of test equipment to include systems test sets and stands such as AN/GRM-122s, frequency meters, standing wave indicators, oscillators, ohmmeters, voltmeters, resistance bridges, and signal generators to localize trouble by component unit, by circuit within a component, and by element of a circuit. Uses special and common hand tools, power tools, and gauges to make intricate repairs. (5) Performs administrative functions in establishing and maintaining maintenance records on equipment maintained or repaired. Assists in the preparation of requests for required repair parts.
Performs other duties as assigned.
CONDITIONS OF EMPLOYMENT
EDUCATION: N/A
You must provide transcripts or other documentation to support your Educational claims. To receive credit for Education, you must provide documentation of proof that you meet the Education requirements for this position.
REMARKS: No PCS available. Position will not be filled until current incumbent vacates. Sensitivity Level 2. Participation in direct deposit is mandatory. - Males born after 31 December 1959 must be registered for Selective Service.
Acceptance of a Technician position may result in the termination of your Selected Reserve bonus.
To view ALL MN National Guard Vacancies, go to: https://minnesotanationalguard.ng.mil/full-time-jobs-in-minnesota/
IMPORTANT NOTES:
You will be evaluated for this job based on how well you meet the qualifications above.
AREAS OF PRIORITY: In Accordance with MN National Guard Regulation 690-335 (Army) or 36-1 (Air), Applications will be forwarded to the selection official to conduct reviews by area of priority as listed below
Area 1: Current On-board Minnesota National Guard Title 32 Technicians who are in permanent or indefinite technician status as a result of being competitively hired within that National Guard component applying for a position within the component which they are currently employed.
Area 2: Current Minnesota National Guard Title 32 Technicians who are in permanent or indefinite technician status as a result of being competitively hired at a sister component that is identified on the Position Vacancy Announcement (PVA), including onboard Title 5 employees that are also current members of MNNG; i.e. Army MNNG to Air MNNG, Air MNNG to Army MNNG.
Area 3: All Minnesota National Guard members currently assigned to the MNANG or to the MNARNG applying for a position within the component in which they are currently assigned. i.e. temporary technician or Traditional Guardsman.
Area 4: Currently assigned service members in other branches of the military outside of the Minnesota National Guard, to include those assigned to Active Duty, Reserve or other state's National Guard.
Area 5: All individuals able to and willing to become members of the Minnesota National Guard including prior service not currently assigned to a military component and non-prior service US civilians.
Evaluation Factors: Candidates will be evaluated on the basis of appropriate education, experience, training, self-development activities, and special awards. Candidates are considered on the basis of available information on their current application and supporting information that has been provided to this office. To ensure full consideration, applicants are urged to submit information about their training, self-development, outside experience, activities and awards. National Guard military (Part-time) service is considered as full-time experience when evaluated against the qualification requirements for a technician position. The applicant is credited with actual number of months the member has been in the National Guard if the experience is related.
Once the announcement has closed, your resume and supporting documentation will be used to determine if you meet the qualifications listed on this announcement. If you are minimally qualified, your resume and supporting documentation will be compared to your responses on the assessment questionnaire to determine your level of experience. If you rate yourself higher than is supported by your application package, your responses may be adjusted and/or you may be excluded from consideration for this position. If you are found to be among the top qualified candidates, you will be referred to the selecting official for employment consideration.
To apply for this position, you MUST submit a complete Application Package which includes:
1. Resume and/or OF 612 showing work schedule, hours worked per week, dates (format must include Month and Year, e.g, 02/2017, Feb 2017, ect.) of employment and duties performed
2. Transcript: If position requires a degree or if using education to qualify
3. It is highly recommended that you also submit the AGO 163 to accurately reflect your military experience
Copies of the OF 612 and AGO 163: http://minnesotanationalguard.ng.mil/full-time-jobs-in-minnesota/
Other Required Documents: N/A
Job Information: Vacancy Identification Number ( 12552561 ), title ( ELECTRONICS MECHANIC ) and Grade(s) ( 8/10 ) for which you are applying for.
Education must be accredited by an accrediting institution recognized by the U.S. Department of Education in order for it to be credited towards qualifications. Therefore, provide only the attendance and/or degrees from schools accredited by accrediting institutions recognized by the U.S. Department of Education.
Failure to provide all of the required information as stated in this vacancy announcement may result in an ineligible rating or may affect the overall rating.
To apply for this position, you must complete the online application/Occupational Questionnaire and submit the documentation specified in the Required Documents section below. To view the Occupational Questionnaire, click the following link: https://apply.usastaffing.gov/ViewQuestionnaire/12552561
A complete application package must be submitted by 11:59 PM (EST) on the closing date of the announcement to receive consideration.
To begin, click Apply to access the online application. You will need to be logged into your USAJOBS account to apply. If you do not have a USAJOBS account, you will need to create one before beginning the application.
Follow the prompts to select your resume and/or other supporting documents to be included with your application package. You will have the opportunity to upload additional documents to include in your application before it is submitted. Your uploaded documents may take several hours to clear the virus scan process.
After acknowledging you have reviewed your application package, complete the Include Personal Information section as you deem appropriate and click to continue with the application process.
You will be taken to the online application which you must complete in order to apply for the position. Complete the online application, verify the required documentation is included with your application package, and submit the application.
To verify the status of your application, log into your USAJOBS account (https://my.usajobs.gov/Account/Login), all of your applications will appear on the Welcome screen. The Application Status will appear along with the date your application was last updated. For information on what each Application Status means, visit: https://www.usajobs.gov/Help/how-to/application/status/.
Once your online application is submitted you will receive a confirmation notification by email. Your application will be evaluated by the Human Resources Office to determine your eligibility for the position. After the evaluation is complete, you will receive another notification regarding the status of your application.
CONTACTING US: After you have read all the instructions in this vacancy announcement, if you still have questions about this position or the application process, you may contact us at (651) 282-4155.
The Federal hiring process is set up to be fair and transparent. Please read the following guidance.
This job originated on www.usajobs.gov. For the full announcement and to apply, visit www.usajobs.gov/job/810137900. Only resumes submitted according to the instructions on the job announcement listed at www.usajobs.gov will be considered.
Learn more about
MINNESOTA ARMY NATIONAL GUARD:
This position is located in the Joint Forces Headquarters-State, Logistics Directorate (J-4), Surface Maintenance Facility. The primary purpose of this position is to perform field and sustainment maintenance and repair on moderately complex electronics equipment and systems. .
POSITION DESCRIPTION: D1204000