This job originated on www.usajobs.gov. For the full announcement and to apply, visit www.usajobs.gov/job/661171300. Only resumes submitted according to the instructions on the job announcement listed at www.usajobs.gov will be considered.
THIS IS A NATIONAL GUARD TITLE 5 EXCEPTED SERVICE POSITION.
This National Guard position is for a QUALITY ASSURANCE SPECIALIST, Position Description Number T5808900 and is part of the MD 175th ANG, National Guard.
06/27/2022 to 07/01/2022
$74,950 - $97,430 per year
GS 11
1 vacancy in the following location:
No
No
Occasional travel - You may be expected to travel for this position.
No
Permanent
Full-time
Excepted
11
No
No
MD-11539758-AF-22-148AT5
661171300
This position is located in an Air National Guard Aviation Wing, Maintenance Group. The primary purpose of this position is to establish and execute a planned systematic approach of quality assurance for all areas of aircraft maintenance, designed to provide the maintenance managers confidence that aircraft, aircraft systems, munitions, equipment, products or supporting processes conform to technical, safety, work load and customer requirements.
Serves as the Office of Primary Responsibility (OPR) for wing maintenance policy, advising supervisors and employees on both general policy and specific maintenance matters. Makes decisions and recommendations on technical concerns presented by supervisors. Utilizes a comprehensive knowledge and ability to interpret Air Force Instructions, Technical Orders, engineering drawings, product specifications, Air Force Occupational and Health (AFOSH) and environmental standards, public law, and locally developed policy. Evaluates and assesses complex systems, subsystems, integrated systems/subsystems, or components for conformance to applicable technical data, engineering drawings, standards and specifications.
Executes the evaluation program and accumulates data using Inspection and Evaluation techniques such as Task Evaluations, Quality Verification Inspections, Special Inspections, Personnel Evaluations and Management Inspections. Evaluates the quality of in-process and after-the-fact maintenance and ensures prescribed technical and management procedures are followed. Serves as the subject matter expert for critical assessment programs such as; Unit Self Inspections, Maintenance Standardization.
Utilizes data collection techniques and procedures for evaluation, inspection, and audit programs, evaluates the results and determines the appropriate and effective method and format for presentation to higher-level management. Performs statistical analysis (e.g. normal distribution, averages, means, standard deviations, trending, root cause analysis, etc.) using standard statistical quality control methods.
Serves as the Aircraft Weight and Balance program manager utilizing complex computer based programs, data bases, electronic weighing apparatus, and integrated weight and balance computers for the Wing to maintain strict accounting of aircraft weight and balance for safe flight operations. Recommends decertification of configuration loads that exceed the safe for flight envelope orground gross weight restrictions. Manages the unit aircraft and equipment impoundment program by thorough investigation of aircraft or equipment anomalies that generated the impoundment. Manages the unit chaffing program.
Reviews wing depot-level assistance requests developed in accordance with tech orders. Reviews for adequacy and submits engineering disposition requests to the System Program Office (SPO).Serves as the unit point of contact regarding all engineering disposition requests. Ensures all authorized technical data variances are submitted to Plans & Scheduling for inclusion in the aircraft/equipment historical records. Coordinates and works with the
Serves as the authority for determining applicability of Time Compliance Technical Orders (TCTO)and One Time Inspections (OTI). Reviews and determines the applicability, completeness, accuracy and of TCTOs and OTIs to unit maintained equipment, notifies the Maintenance Operations Center(MOC), and monitors expended man-hours and the quality of unit compliance actions. Determines surveillance and evaluation coverage based on the complexity of the TCTO/OTI as well as to the criticality of the system or the component to be modified. Monitors the quality of the first job andperforms kit proofing as required. engineering functions at the ALC and Air Force Material Command (AFMC) to insure quality assurance plans interface.
Performs other duties as assigned.
Federal employment suitability as determined by a background investigation. May be required to successfully complete a probationary period. Participation in direct deposit is mandatory.
1. Must be able to obtain and maintain the appropriate security clearance of the position.
2. This position is covered by the Domestic Violence Misdemeanor Amendment (30 Sep 96) of the Gun Control Act (Lautenberg Amendment) of 1968. An individual convicted of a qualifying crime of domestic violence may not perform the duties of this position.
3. Ability to establish effective professional working relationships with coworkers and customers, contributing to a cooperative working environment and successful accomplishment of the mission.
4. May occasionally be required to work other than normal duty hours; overtime may be required.
5. The duties and responsibilities of your job may significantly impact the environment. You are responsible to maintain awareness of your environmental responsibilities as dictated by legal and regulatory requirements, your organization, and its changing mission.
6. This position is designated as Essential Personnel and may be subject to duty in preparation for, or in response to, a state emergency or disaster declaration. This designation will not exceed 14 calendar days per year unless otherwise approved in advance by the TAG.
If you are using Education to qualify for this position,
Ph.D. or equivalent doctoral degree
or
3 full years of progressively higher level graduate education
leading to such a degree
You must provide transcripts or other documentation to support your Educational claims. To receive credit for Education, you must provide documentation of proof that you meet the Education requirements for this position.
Your qualifications will be evaluated on the following competencies (knowledge, skills, abilities and other characteristics):
--Broad knowledge of the body of laws, regulations, policies and procedures relating to aircraft maintenance, ground, explosive & flight safety, occupational health and environmental compliance. Ability to use this knowledge to develop an evaluation plan and prevention effort to minimize risk and prevent damage to equipment, structures, weapons systems, or injury to personnel.
--Skill in applying this knowledge to the identification of quality problems and resolving the difficult and complex work assignments. Skill to plan and conduct studies, analyze performance and quality data and to develop sound recommendations for correction of quality system deficiencies.
--Ability to conduct technical reviews, analyze findings and develop recommendations for corrections or improvements in the quality assurance program. Ability to prepare technical reports on quality levels, to identify specific problem areas and to recommend corrective action.
--Ability to communicate effectively through written and oral presentations. Skill and ability to work effectively in stressful situations and maintain effective interpersonal relationships at all levels within the organization. Ability to plan and successfully complete individual projects and/or larger projects.
CONTINUED IN HOW YOU WILL BE EVALUATED
If you are a male applicant who was born after 12/31/1959 and are required to register under the Military Selective Service Act, the Defense Authorization Act of 1986 requires that you be registered or you are not eligible for appointment in this agency (https://www.sss.gov/RegVer/wfRegistration.aspx).
If you are unable to apply online or need to fax a document you do not have in electronic form, view the following link for information regarding an Alternate Application.
You will be evaluated for this job based on how well you meet the qualifications above.
Once the announcement has closed, your resume and supporting documentation will be used to determine if you meet the qualifications listed on this announcement. If you are minimally qualified, your resume and supporting documentation will be compared to your responses on the assessment questionnaire to determine your level of experience. If you rate yourself higher than is supported by your application package, your responses may be adjusted and/or you may be excluded from consideration for this position. If you are found to be among the top qualified candidates, you will be referred to the selecting official for employment consideration.
Your qualifications will be evaluated on the following competencies (knowledge, skills, abilities and other characteristics):
--Comprehensive knowledge of assigned aircraft and complex aircraft systems to include but not limited to electronic equipment and systems, manual and automatic flight controls, airframe, landing gear, pneudraulics, jet engine propulsion and associated systems, Aerospace Ground Equipment, Support equipment, and related test equipment.
--Knowledge of munitions storage methods, procedures, and techniques to determine storage location based on condition code, compatibility, and security requirements.
--Knowledge of the techniques, documentation, and equipment used in the examination, classification, and maintenance of munitions assets and their components.
--Comprehensive and thorough knowledge of the entire maintenance quality assurance program to include the full range of principles, concepts and methodology and the establishment of procedures for monitoring the quality of products in a maintenance environment.
--Broad knowledge of the practices, policies and procedures of related functional and administrative activities such as Technical Order Distribution Office (TODO), logistics maintenance support functions, contract administration and coordination of CLS or CFT, engineering disposition requests, maintenance production, procurement, supply support, munitions storage etc. and skill in effecting appropriate interface/coordination of quality assurance plans and programs and evaluations with these activities. Broad knowledge of the TCTO and QDR process and the interface/coordination with depot engineering and supply process.
--Thorough knowledge of the Maintenance Standardization Evaluation Program (MSEP).
--Broad knowledge of end items, systems, including quality characteristics and working knowledge of manufacturing methods, special processes and the interrelationship of various parts. Working knowledge of systems, subsystems and end item components and the functional relationships among components and subsystems, and test and measurement techniques.
To apply for this position, you must submit a complete Application Package which includes:
1. Your resume showing work schedule, hours worked per week, dates (including Month and Year, e.g., 02/2017, Feb 2017, etc.) of employment and duties performed.
2. Other supporting documents:
Vet Pref:
If you are claiming veteran's preference, you MUST submit the appropriate documentation. Failure to do so WILL result in the loss of veteran's preference.
- 10-Point Veterans' Preference: You MUST submit a signed SF-15, "Application for 10-Point Veterans' Preference" plus the proof as required by the SF-15.
- 5-Point Veterans' Preference: You MUST submit a copy of your DD-214 which includes Character of Service (usually Member-4 copy). If you are currently active duty, you may submit written documentation (certification) from your branch of service certifying that you are expected to be discharged or released from active duty under honorable conditions no later than 120 days after the date the certification is signed. The certification should also include when your terminal leave will begin, your rank and dates of active duty service.
Education must be accredited by an accrediting institution recognized by the U.S. Department of Education in order for it to be credited towards qualifications. Therefore, provide only the attendance and/or degrees from schools accredited by accrediting institutions recognized by the U.S. Department of Education.
Failure to provide all of the required information as stated in this vacancy announcement may result in an ineligible rating or may affect the overall rating.
To apply for this position, you must complete the online application/Occupational Questionnaire and submit the documentation specified in the Required Documents section below. To view the Occupational Questionnaire, click the following link: https://apply.usastaffing.gov/ViewQuestionnaire/11539758
A complete application package must be submitted by 11:59 PM (EST) on the closing date of the announcement to receive consideration.
To begin, click Apply to access the online application. You will need to be logged into your USAJOBS account to apply. If you do not have a USAJOBS account, you will need to create one before beginning the application.
Follow the prompts to select your resume and/or other supporting documents to be included with your application package. You will have the opportunity to upload additional documents to include in your application before it is submitted. Your uploaded documents may take several hours to clear the virus scan process.
After acknowledging you have reviewed your application package, complete the Include Personal Information section as you deem appropriate and click to continue with the application process.
You will be taken to the online application which you must complete in order to apply for the position. Complete the online application, verify the required documentation is included with your application package, and submit the application.
To verify the status of your application, log into your USAJOBS account (https://my.usajobs.gov/Account/Login), all of your applications will appear on the Welcome screen. The Application Status will appear along with the date your application was last updated. For information on what each Application Status means, visit: https://www.usajobs.gov/Help/how-to/application/status/.
Once your online application is submitted you will receive a confirmation notification by email. Your application will be evaluated by the Human Resources Office to determine your eligibility for the position. After the evaluation is complete, you will receive another notification regarding the status of your application.
The Federal hiring process is set up to be fair and transparent. Please read the following guidance.
This job originated on www.usajobs.gov. For the full announcement and to apply, visit www.usajobs.gov/job/661171300. Only resumes submitted according to the instructions on the job announcement listed at www.usajobs.gov will be considered.
Learn more about
THIS IS A NATIONAL GUARD TITLE 5 EXCEPTED SERVICE POSITION.
The National Guard is the oldest component of the Armed Forces of the United States. Since the earliest American colonial days, citizens have joined together for collective defense. We have a proud tradition of coming to the aid of our friends and neighbors in times of serious emergencies. Join our National Guard team and serve your nation, your states and your community!