The position serves as liaison between Architect/Engineering (A/E) consultants and construction contractors on remodeling and expansion of the WCF. This position designs renovations and expansions of the WCF and executes the resultant contract for construction; serves as the technical resource and control for the BEP on matters of design; assists in the advanced planning of the WCF, and provides the liaison between managers of the WCF and the branch or divisionLearn more about this agency
As an Interdisciplinary Architect/General Engineer, you will:
- Serve as a plant Architect/Engineer for the WCF and be responsible for guidance and coordination of various disciplines in complex design development of plans from conception through completion for renovation and expansion of the facility.
- Assists in administering construction projects as a Contracting Officer's Representative (COR) and makes recommendations to the Contracting Officers concerning contract compliance and contract modifications.
- Provide liaison between managers of using departments of the WCF for information on scope, schedules, milestones and completion of construction affecting use of the facility and potential interruption of operations.
Conditions of Employment
- Must be U.S. Citizens or U.S. Nationals.
- Click "Print Preview" to review the entire announcement before applying.
- Please refer to "Conditions of Employment."
The experience may have been gained in either the public or private sector. One year of experience refers to full-time work; part-time work is considered on a prorated basis. To ensure full credit for your work experience, please indicate dates of employment by month/day/year, and indicate number of hours worked per week on your résumé.
SUITABILITY, CLEARANCE & REQUIREMENTS: A background investigation will be required for all new hires. Appointment will be subject to the applicant’s successful completion of a background investigation and favorable adjudication. Failure to successfully meet these requirements will be grounds for disqualification in the hiring process. The background investigation process conducted by the Bureau of Engraving and Printing is very thorough. Therefore it is imperative that applicants exercise candor and honesty when answering background questionnaires, especially as it relates to arrest, employment, education, finances, illegal drug use, and/or other criminal history. Falsification discovered in security documents or during the background investigation process may result in an immediate negative suitability determination or immediate revocation of your interim clearance (if applicable).
You must meet the following requirements by the closing date of this announcement.
Basic Requirements for Architect, 0808
Degree: Successful completion of a full four year course of study leading to a Bachelor's degree or higher in architecture; or related field that included 60 semester hours of course work in architecture or related disciplines of which at least (1) 30 semester hours were in architectural design, and (2) 6 semester hours were in each of the following: structural technology, properties of materials and methods of construction, and environmental control systems.
Combination of education and experience - college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the arts and sciences underlying professional architecture, and (2) a good understanding, both theoretical and practical, of the architectural principles, methods, and techniques and their applications to the design and construction or improvement of buildings. The adequacy of such background must be demonstrated by at least one of the following:
Related Curriculum: Degree in architectural engineering may be accepted as satisfying in full the basic requirements, provided the completed course work in architectural engineering provided knowledge, skills, and abilities substantially equivalent to those provided in the courses specified in paragraph A. The curriculum for a degree in either architecture or architectural engineering covers function, esthetics, site, structure, economics, mechanical-electrical, and other engineering problems related to the design and construction of buildings primarily (but not exclusively) intended to house human activities. The courses required for a degree in architecture generally place emphasis upon planning, esthetics, and materials and methods of construction, while the courses for an architectural engineering degree place equal or greater weight on the technical engineering aspects such as structural systems, mechanical systems, and the properties of materials. Because of this difference in emphasis, persons with degrees in architecture may have a preference for work assignments that offer greater opportunities for them to express their artistic and creative abilities. As a result, they may be more concerned with planning and design aspects of architecture, and persons with degrees in architectural engineering may be more engaged in aspects emphasizing technical engineering considerations.
Experience: An applicant lacking a degree in architecture must have had l year of experience in an architect's office or in architectural work for each year short of graduation from a program of study in architecture. In the absence of college courses, 5 years of such experience is required. This experience must have demonstrated that the applicant has acquired a thorough knowledge of the fundamental principles and theories of professional architecture.
Basic Requirements for General Engineer, 0801
Degree: Successful completion of a full four year course of study leading to a Bachelor's degree or higher in engineering. To be acceptable, the curriculum must: (1) Lead to a bachelor’s degree in a school of engineering with at least one curriculum accredited by the Accreditation Board for Engineering and Technology (ABET) or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.
Combination of education and experience -- college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying professional engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:
1.Professional registration or licensure -- Current registration as an Engineer Intern (EI), Engineer in Training (EIT)1, or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering position
2.Written Test -- Evidence of having successfully passed the Fundamentals of Engineering (FE)2 examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico.
3.Specified academic courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and in engineering that included the courses specified in the basic requirements. The courses must be fully acceptable toward meeting the requirements of a professional engineering curriculum as described in paragraph A.
4.Related curriculum -- Successful completion of a curriculum leading to a bachelor's degree in engineering technology or in an appropriate scientific field, e.g., engineering technology physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all-inclusive.)
A college or university degree generally must be from an accredited (or pre-accredited) college or university recognized by the U.S. Department of Education. For a list of schools which meet these criteria, please refer to Department of Education Accreditation page. If you are qualifying based on foreign education, you must submit proof of creditability of education as evaluated by a credentialing agency.
Specialized experience: For the GS-13, you must have one year of specialized experience at a level of difficulty and responsibility equivalent to the GS-12 grade level in the Federal service. Specialized experience for this position includes: Demonstrated general engineering/architectural experience performing project management with knowledge of building systems, manufacturing processes, and/or architectural work in support of a wide range of design and construction of manufacturing facilities and/or other related industrial facilities.
In addition to the above requirements, you must meet the following time-in-grade requirement, if applicable: For the GS-13, you must have been at the GS-12 level for 52 weeks.
This job is interdisciplinary (or multiple series) and will be filled by one of two series: General Engineer GS-0801 or Architect GS-0808 upon selection of the candidate. Each of these two occupational series has a basic qualification requirement. Applicants must meet the basic qualification requirement for at least one of these occupational series, in addition to the specialized experience and/or education requirement for the position at the GS-13 level. Please refer to the " Qualifications" section of this announcement for the educational requirements.
A college or university degree generally must be from an accredited (or pre-accredited) college or university recognized by the U.S. Department of Education. For a list of schools which meet these criteria, please refer to Department of Education Accreditation page.
- We may select from this announcement or any other source to fill one or more vacancies.
- This is a non-bargaining unit position.
- We offer opportunities for telework.
- We offer opportunities for flexible work schedules.
- The facility typically shuts down annually between Christmas and New Year's Day. As such, all BEP employees must take leave for work days during the shutdown period.
CONDITIONS OF EMPLOYMENT:
- A one year probationary period may be required.
- Public Trust – Background Investigation will be required.
- Complete a Declaration for Federal Employment to determine your suitability for Federal employment, at the time requested by the agency.
- If you are a male applicant born after December 31, 1959, certify that you have registered with the Selective Service System or are exempt from having to do so.
- Have your salary sent to a financial institution of your choice by Direct Deposit/Electronic Funds Transfer.
- Go through a Personal Identity Verification (PIV) process that requires two forms of identification from the Form I-9. Federal law requires verification of the identity and employment eligibility of all new hires in the U.S.
- Submit to a drug test prior to your appointment
- Wear required safety clothing and/or equipment required by the position. This may include safety shoes, hard hats, hearing protection, gloves, masks, etc.
How You Will Be Evaluated
You will be evaluated for this job based on how well you meet the qualifications above.
Your application includes your résumé, responses to the online questions, and required supporting documents. Please be sure that your résumé includes detailed information to support your qualifications for this position; failure to provide sufficient evidence in your résumé may result in a “not qualified” determination.
Rating: Your application will be evaluated in the following areas: Technical; Project management; Communication and Planning and Evaluating.Your application will be rated and ranked among others, based on your responses to the online questions, regarding your experience, education, training, performance appraisals and awards relevant to the duties of this position. A subject matter expert may be used in the evaluation. Your rating may be lowered if your responses to the online questions are not supported by the education and/or experience described in your application.
Referral: If you are among the top qualified candidates, your application may be referred to a selecting official for consideration. You may be required to participate in a selection interview. We will not reimburse costs related to the interview such as travel to and from the interview site.
If you are a displaced or surplus Federal employee (eligible for the Career Transition Assistance Plan (CTAP)/Interagency Career Transition Assistance Plan (ICTAP)) you must score 90 or better to be rated as “well qualified" to receive special selection priority.
To preview questions please click here.
Background checks and security clearance
Drug test required
A complete application includes 1. A résumé, 2. Vacancy question responses, and 3. Submission of any required documents. Please note that if you do not provide all required information, as specified in this announcement, you may not be considered for this position (or may not receive the special consideration for which you may be eligible).
All applicants are required to submit:
Résumé either by creating one in USAJOBS or uploading one of their own choosing. (Cover letters are optional.) To receive full credit for relevant experience, please list the month/date/year and number of hours worked for experience listed on your résumé. We suggest that you preview the online questions, as you may need to customize your résumé to ensure that it supports your responses to these questions. Please view résumé tips.
Appraisal: a copy of your most recent, signed, completed annual performance appraisal which includes the final rating. If it is not dated within the last 18 months, or if you have not received a performance appraisal, please explain why in your application.
CURRENT AND FORMER FEDERAL EMPLOYEES -- Documentation Relating to Your Federal Employment:
- Submit a copy of your SF-50, Notification of Personnel Action, which shows your current (or most recent) grade and competitive service status. (The “position occupied” block on the SF-50 should show a “1” and your “tenure” block should show a “1” or “2”.)
- If you are currently on a Veterans Recruitment Appointment (VRA), submit a copy of an SF-50 showing that. Also, you must submit a copy of your DD214 or other documentation showing dates of service and type of discharge and any other applicable documents such as SF-15, VA letters, etc.
- Indicate on your application the highest permanent grade you have held; if this grade is different from your current grade, submit a copy of an additional SF-50 showing this grade.
CAREER TRANSITION ASSISTANCE PLAN (CTAP) OR INTERAGENCY CAREER TRANSITION ASSISTANCE PLAN (ICTAP) DOCUMENTATION: If you are a displaced or surplus Federal employee, click CTAP/ICTAP for eligibility and a detailed list of required documents.
If you are applying under a special hiring authority (e.g. Military Spouses, Interchange Agreement, VEOA, VRA, Schedule A Disability, etc.), please see applicant guide for required documentation. In order to be eligible under one of these authorities, you must submit all required documentation as outlined in the applicant guide.
EDUCATION DOCUMENTATION: For positions with an education requirement, or if you are qualifying for this position by substituting education or training for experience, submit a copy of your transcripts or equivalent. An official transcript will be required if you are selected.
A college or university degree generally must be from an accredited (or pre-accredited) college or university recognized by the U.S. Department of Education. For a list of schools which meet these criteria, please refer to Department of Education Accreditation page. If you are qualifying based on foreign education, you must submit proof of creditability of education as evaluated by a credentialing agency. Refer to the OPM instructions.
If you are relying on your education to meet qualification requirements:
Education must be accredited by an accrediting institution recognized by the U.S. Department of Education in order for it to be credited towards qualifications. Therefore, provide only the attendance and/or degrees from schools accredited by accrediting institutions recognized by the U.S. Department of Education.
Failure to provide all of the required information as stated in this vacancy announcement may result in an ineligible rating or may affect the overall rating.
A career with the U.S. Government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Learn more about federal benefits.
Our comprehensive benefits are very generous. Our benefits package includes:
- Challenging work, opportunities for advancement, competitive salaries, bonuses and incentive awards.
- Ten paid holidays, 13 days of sick leave, and 13 to 26 days of vacation time each year.
- Access to insurance programs that may be continued after you retire.
- A wide choice of health insurance plans, coverage for pre-existing conditions, and no waiting periods. We pay a substantial amount (up to 75%) of the health insurance premiums.
- A retirement program which includes employer-matching contributions.
- Learn more about Federal benefits programs at: https://help.usajobs.gov/index.php/Pay_and_Benefits
Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time, or intermittent. Contact the hiring agency for more information on the specific benefits offered.
How to Apply
The Bureau of Engraving and Printing (BEP) has partnered with the Treasury's Bureau of the Fiscal Service to provide certain personnel services to its organization. Fiscal Service's responsibilities include advertising vacancies, accepting and handling applications, and extending job offers.
The following instructions outline our application process. You must complete this application process and submit any required documents by 11:59 p.m. Eastern Time (ET) on the closing date of this announcement. We are available to assist you during business hours (normally 8:00 a.m. - 5:00 p.m. ET, Monday - Friday). If applying online poses a hardship, please contact us by noon ET on the announcement's closing date.
BEP provides reasonable accommodation to applicants with disabilities on a case-by-case basis. Please contact us if you require this for any part of the application and hiring process.
To begin, either click the “Create a New Account” button and follow the prompts to register or if you previously registered, click the "Apply Online" button and follow the prompts.
You will be re-directed to BEP's CareerConnector system to complete your application process; answer the online questions, and submit all required documents. (To submit supporting documents, click one of the available options; Upload; Fax; or Reuse existing documents. To protect your privacy, we suggest you first remove your SSN). Also, go to “My Account” to view and update your information, as necessary.
To complete, you must click the “Finish” button located at the bottom of the “Application Review” page.
To verify your application is complete, log into your USAJOBS account, select the Application Status link and then select the more information link for this position. The Details page will display the status of your application, the documentation received and processed, and any correspondence the agency has sent related to this application.
To return to an incomplete application, log into your USAJOBS account and click Update Application in the vacancy announcement. You must re-select your resume and/or other documents from your USAJOBS account or your application will be incomplete.
If you are experiencing system issues with your application, please contact the CareerConnector Help Desk at email@example.com and/or the USAJOBS Help Desk.
For additional information on how to apply, please visit the Partnership for Public Service’s Go Government website.
Agency contact information
Applicant Call Center
AddressBureau of Engraving and Printing (BEP)
see "How To Apply" section
Washington, District of Columbia 20228
To check the status of your application for this position, please follow these steps:
- Login to your USAJOBS account, select the "Applications" section and click on the vacancy you would like to view and have already applied for.
- Under "application status," click "additional application information" and you will be taken to the CareerConnector website where you can check your application status. The "additional application information" link may not be available if your application status says "Unavailable." This indicates that your application is not complete.
Fair & Transparent
The Federal hiring process is setup to be fair and transparent. Please read the following guidance.
Equal Employment Opportunity Policy
The United States Government does not discriminate in employment on the basis of race, color, religion, sex (including pregnancy and gender identity), national origin, political affiliation, sexual orientation, marital status, disability, genetic information, age, membership in an employee organization, retaliation, parental status, military service, or other non-merit factor.
Reasonable Accommodation Policy
Federal agencies must provide reasonable accommodation to applicants with disabilities where appropriate. Applicants requiring reasonable accommodation for any part of the application process should follow the instructions in the job opportunity announcement. For any part of the remaining hiring process, applicants should contact the hiring agency directly. Determinations on requests for reasonable accommodation will be made on a case-by-case basis.
A reasonable accommodation is any change to a job, the work environment, or the way things are usually done that enables an individual with a disability to apply for a job, perform job duties or receive equal access to job benefits.
Under the Rehabilitation Act of 1973, federal agencies must provide reasonable accommodations when:
You can request a reasonable accommodation at any time during the application or hiring process or while on the job. Requests are considered on a case-by-case basis.
Legal and regulatory guidance
This job originated on www.usajobs.gov. For the full announcement and to apply, visit www.usajobs.gov/GetJob/ViewDetails/568028600. Only resumes submitted according to the instructions on the job announcement listed at www.usajobs.gov will be considered.