This position is located in the Office of Smithsonian Facilities (SF), Office of Planning, Design and Construction (OPDC), Engineering and Design Division (EDD). The incumbent of this position will perform engineering and design management, commissioning services, in-house mechanical design services as well as building code and technical reviews of designs created in-house or by outside architect-engineering and exhibit design firms for institution-wide projects.Learn more about this agency
- Provides engineering support of in-house design for small building projects.
- Analyzes building system performance issues and proposes technical solutions.
- Leads project teams of professionals, stakeholders, contracted architects and engineers from inception to completion of building design.
- Reviews the design documents prepared by the architects and engineers for technical adequacy, accuracy, and quality assurance.
- Serves as a mechanical engineering expert directing the design process of buildings’ HVAC and plumbing engineering systems.
Conditions of Employment
- Pass Pre-employment Background Investigation
- May need to complete a Probationary Period
- Maintain a Bank Account for Direct Deposit/Electronic Transfer
- Males born after 12/31/59 must be registered with Selective Service.
Qualification requirements must be met within 30 days of the job announcement closing date.
For information on qualification requirements, see Qualification Standards Handbook for General Schedule Positions viewable on the web at http://www.opm.gov/qualifications.
In addition to Basic Requirement below you must also have the following experience:
Experience: You must have one year of specialized experience (Federal or other) equivalent to the GS-12 level that is close or similar to the work of this job. For this position specialized experience is defined as providing mechanical engineering services in the overall planning, problem identification and need analysis, design evaluation, design management of the mechanical, HVAC and plumbing systems design aspects of historical buildings, museums and similar spaces; reviewing work of consulting engineers and contractor in the practice of mechanical engineering; serving as the Contracting Officer Technical Representative (COTR) for contract management and administration directing the work of consulting engineers; performing in-house design of HVAC and plumbing systems and lead the work of project teams for assigned projects.
Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience.
Part-time and/or unpaid experience related to this position will be considered to determine the total number of years and months of experience. Be sure to note the number of paid or unpaid hours worked each week.
(You must submit unofficial school transcripts)
A. Degree: Engineering. To be acceptable, the program must: (1) lead to a bachelor’s degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.
B. Combination of education and experience -- college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:
- Professional registration or licensure -- Current registration as an Engineer Intern (EI), Engineer in Training (EIT) 1 , or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.
- Written Test -- Evidence of having successfully passed the Fundamentals of Engineering (FE) 2 examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico.
- Specified academic courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A.
- Related curriculum -- Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor’s degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all inclusive.)
For more information about EI and EIT registration requirements, please visit the National Society of Professional Engineers website at: http://www.nspe.org.
The FE examination is not administered by the U. S. Office of Personnel Management. For more information, please visit: http://www.nspe.org/Licensure/HowtoGetLicensed/index.html.
Flexible Spending Accounts - https://www.fsafeds.com/
Health Insurance - http://www.opm.gov/insure/health/index.asp
Leave - http://www.opm.gov/oca/leave/index.asp
Life Insurance - http://www.opm.gov/insure/life/index.asp
Long Term Care Insurance - http://www.ltcfeds.com
Retirement Program - https://www.opm.gov/retirement-services/
How You Will Be Evaluated
You will be evaluated for this job based on how well you meet the qualifications above.
Your application will be evaluated first for the basic qualifications described above. The applications that meet the basic qualifications will be evaluated further against the following criteria:
- Ability to design a selection of mechanical engineering systems.
- Ability to apply concepts, principles and practices of mechanical and plumbing design.
- Ability to operate in a leadership role for a project team of professionals and contracted architects and engineers.
- Ability to provide building engineering design and analysis, including sketches and CADD drawings, specifications, and heating/cooling load calculations.
Applicants who meet or exceed minimum qualifications will be assigned to one of three category groups based on job-related criteria: Best Category - Meets the minimum qualification requirements and excels in most of the job related competencies above. Better Category - Meets the minimum qualification requirements and satisfies most of the job related competencies above. Good Category - Meets the minimum qualification requirements, but does not satisfy most of the job related competencies above to a substantive degree. This category rating process does not add veterans' preference points or apply the "rule of three", but protects the rights of veterans by placing them ahead of non-preference eligibles within each category. A selecting official may make selections from the highest quality category (Best Category) provided no preference eligible in that category is passed over to select a non-preference eligible in that category unless the requirements of 5 U.S.C. 3317(b) or 3318(b) are satisfied. Preference eligibles who meet minimum qualification requirements and who have a compensable service-connected disability of at least 10 percent must be listed in the highest quality category, except when the position being filled is scientific or professional at the GS-9 grade level or higher. Applicants who have not submitted a resume in the USAjobs system and/or have not answered all of the vacancy questions will not be considered for this position.
Your resume and supporting documentation will be compared to your responses to the occupational questionnaire or other assessment tool for consistency. If a determination is made that you have rated yourself higher than is supported by your resume, you will be assigned a rating commensurate to your described experience. Your resume should provide sufficient information regarding how your education and experience relate to this position, including the major duties and qualifications criteria listed.
To preview questions please click here.
Background checks and security clearance
Drug test required
Your application package should include the following documents:
Resume - Your resume can be uploaded and attached to your application or created using the USA Jobs on-line resume builder. If you want to receive full credit for relevant experience your resume MUST contain the job title (including the occupational series and grade if it is Federal), duties, starting and ending dates (month and year), hours worked per week, and salary.
USAJOBS has guidance on how to ensure that you submit a complete resume: If you have not written a Federal resume before, you may watch this Resume Writing Tutorial video on the USAJOBS YouTube channel, or read through a helpful Resume Writing FAQ article on the USAJOBS Help Site to learn what details you should, and should not, include in your resume. If any of the above information is not included in your resume we may not be able to fully credit you for your experience.
- Proof of Veteran's Preference - DD214 (Member 4 Copy), if you are a veteran. Additionally, applicants claiming 10-point preference must complete Standard Form (SF) 15, Application for 10-Point Veteran Preference, as well as additional documentation required by the SF-15, such as a VA letter.
- Unofficial school transcripts, if the position has an education requirement or if you are using education to qualify. If selected for the position, you must provide an official transcript before appointment.
- Proof of U.S. accreditation for foreign study, if applicable.
If you are relying on your education to meet qualification requirements:
Education must be accredited by an accrediting institution recognized by the U.S. Department of Education in order for it to be credited towards qualifications. Therefore, provide only the attendance and/or degrees from schools accredited by accrediting institutions recognized by the U.S. Department of Education.
Failure to provide all of the required information as stated in this vacancy announcement may result in an ineligible rating or may affect the overall rating.
How to Apply
Click on the "Apply Online" button on the upper right side of the page. Please Note:
- You must apply for this position online through the 'Apply Online' button and submit required supplemental documents (if they are relevant to you).
- You may submit required documents by uploading them online during the application process; OR You may manually fax required documents. Faxes are received by an automated system, not a physical fax machine. Documents that are faxed as part of the application process must be sent with the system generated cover sheet by the closing date. Documents faxed without the system generated coversheet are not retrievable and cannot be considered as part of the application package.
- The complete application package, including any required documents, is due in the Smithsonian Office of Human Resources on the closing date of the announcement by 11:59 PM Eastern Time.
- If you are unable to apply online, paper applications may be accepted with prior approval of the Contact Person listed below.
Agency contact information
Office of Human Resources
POB 37012, 600 Maryland Avenue, MRC 517
Washington, District of Columbia 20013-7012
At the end of the application process you will be able to create and save a PDF file that contains your responses to the assessment questions. You may save this file as initial receipt of your application. After the job announcement closes, you will receive an email from the Smithsonian with confirmation of receipt. The Smithsonian receives many applications for each job. Each application is reviewed carefully which may take a few weeks. We will send you an e-mail to update you as we go through phases of the application review process. You may also check your application status by logging into www.usajobs.gov and selecting the tab "My USAJOBS;" e-mailing firstname.lastname@example.org; or by contacting the Office of Human Resources Representative listed. Additional Information:
Fair & Transparent
The Federal hiring process is setup to be fair and transparent. Please read the following guidance.
Equal Employment Opportunity Policy
The United States Government does not discriminate in employment on the basis of race, color, religion, sex (including pregnancy and gender identity), national origin, political affiliation, sexual orientation, marital status, disability, genetic information, age, membership in an employee organization, retaliation, parental status, military service, or other non-merit factor.
Reasonable Accommodation Policy
Federal agencies must provide reasonable accommodation to applicants with disabilities where appropriate. Applicants requiring reasonable accommodation for any part of the application process should follow the instructions in the job opportunity announcement. For any part of the remaining hiring process, applicants should contact the hiring agency directly. Determinations on requests for reasonable accommodation will be made on a case-by-case basis.
A reasonable accommodation is any change to a job, the work environment, or the way things are usually done that enables an individual with a disability to apply for a job, perform job duties or receive equal access to job benefits.
Under the Rehabilitation Act of 1973, federal agencies must provide reasonable accommodations when:
- An applicant with a disability needs an accommodation to have an equal opportunity to apply for a job.
- An employee with a disability needs an accommodation to perform the essential job duties or to gain access to the workplace.
- An employee with a disability needs an accommodation to receive equal access to benefits, such as details, training, and office-sponsored events.
You can request a reasonable accommodation at any time during the application or hiring process or while on the job. Requests are considered on a case-by-case basis.
Legal and regulatory guidance
This job originated on www.usajobs.gov. For the full announcement and to apply, visit www.usajobs.gov/GetJob/ViewDetails/545641000. Only resumes submitted according to the instructions on the job announcement listed at www.usajobs.gov will be considered.