This position is located in the Bureau of Overseas Buildings Operations, Program Development Coordination and Support, Office of Cost Management (OBO/PDCS/COST). The incumbent provides expert professional architectural/engineering (A/E) advice, guidance, and analytical cost engineering services at all phases of project planning and development, through execution phases to completion of assigned projects for the Bureau's construction program within the assigned regions.Learn more about this agency
- Provides a complete range of cost analysis and cost management services that include, but are not limited to program, cost and price analysis, cost planning, concept cost estimating, budget development.
- Analyzes project and program requirements and prepares conceptual and detailed budget estimates that may be developed from partially complete scopes of work.
- Directly controls all technical aspects of contracts between the United States Government (USG) and independent A/E cost estimators for each project.
- At the GS-11 level, the incumbent performs essentially the same duties as outlined above; however, the scope and complexity of assignments are of less responsibility and independence and receives closer than normal supervision.
Occasional travel - Travel may be required to locations which typically do not have the same sanitary, healthcare, and environmental conditions that exist In most of the United States, and some locations require special precautions regarding food and water consumption and personal safety.
Job family (Series)
Conditions of Employment
- U.S. Citizenship is required.
- Statement of Employment & Financial Interest required prior to appointment.
- Must be able to obtain and maintain a Top Secret security clearance.
- One year probationary period, unless excepted by regulation.
- Incumbent will be subject to random drug testing.
Applicants must meet all the required qualification requirements, including education and any selective placement factors described below by the closing date of this announcement.
If you are qualifying based on education OR if there are mandatory education requirements listed below, you MUST submit a copy of your college transcript with your application.
Applicants MUST show that they possess a professional knowledge of general engineering as evidenced by ONE of the following Basic Requirements:
A. Bachelor's or Higher Degree: The program must: (1) be in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.
B. Combination of education and experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying professional engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by ONE of the following:
1. Professional Registration or Licensure: Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.
2. Written Test: Evidence of having successfully passed the Fundamentals of Engineering (FE) examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico.
3. Specified Academic Courses: successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A.
4. Related Curriculum: Successful completion of a curriculum leading to a bachelor's or higher degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all-inclusive.)
Notes: 1) Applicants who meets the Basic Requirements in A or B above, except as noted under B.1., may qualify for positions in any branch of engineering unless selective factors indicate otherwise; 2) Professional engineering experience required for grades GS-7 and above is defined as non-routine engineering work that required and was characterized by professional knowledge of engineering, professional ability to apply such knowledge to engineering problems, and positive and continuing development of professional knowledge and ability; 3) To be considered, applicants MUST submit transcripts and copies of professional registration and/or licensure to verify Basic Requirements by the closing date of the announcement.
If you are applying to the GS-11, IN ADDITION to the Basic Requirements above, you MUST also have:
A. 1 year of specialized experience that is related to the work of the position, is equivalent to at least the GS-09 level in the Federal service, and demonstrates the following:
- Experience assisting a contracting official in determining the lowest technically acceptable price, or best value, based on a price proposal analysis.
- Experience preparing cost estimates for construction projects.
- Experience analyzing contractor proposal prices and preparing proposal price technical reports.
B. 3 full years of progressively higher-level graduate education leading to a Ph.D. degree or Ph.D. or equivalent doctoral degree in engineering or a related field provided that your total background (i.e., education and any experience) demonstrates knowledge, skills, and abilities that are substantially equivalent to those acquired through the completion of the courses as described in the Basic Requirements above.
C. A combination of specialized experience AND graduate level education as described above that, when combined, equal 100% of the total requirement. (Please note that only graduate education in excess of the amount required for the next lower grade level may be used to qualify.)
If you are applying to the GS-12, IN ADDITION to the Basic Requirements above, you MUST also have 1 year of specialized experience that is related to the work of the position, is equivalent to at least the GS-11 level in the Federal service, and demonstrates the following:
- Experience preparing cost and/or technical reports and briefings to facilitate management personnel in decision making process.
- Experience developing and reviewing cost estimates for major building construction projects and renovations using industry standard techniques, such as parametric cost modeling and detailed quantity takeoffs.
- Experience conducting risk analyses for construction cost estimates.
Note: All applicants MUST submit transcripts as verification of educational requirement by the closing date of this announcement. If you fail to provide requested information, or the information you submit is insufficient to verify your eligibility, you WILL lose consideration for this position.
See the qualifications section of this vacancy announcement for education requirements, if applicable.
For reasonable accommodation at the U.S. Department of State, please contact the Office of Accessibility and Accommodations at (202) 663-3474 or ReasonableAccommodations@state.gov.
How You Will Be Evaluated
You will be evaluated for this job based on how well you meet the qualifications above.
Your application will be evaluated and rated under the Category Rating and Selection procedures. Based on your responses to the job-specific self-assessment questions, eligible candidates are placed for selection consideration into one of three pre-defined quality categories as described below:
Highly-qualified Category - In addition to meeting minimum qualifications for the position, candidates must fully demonstrate proficiency in all major aspects of the position.
Well Qualified Category - In addition to meeting minimum qualifications, candidates must demonstrate proficiency in some, but not all of the major aspects of the position.
Qualified Category - In addition to meeting minimum qualifications, applicants must demonstrate a basic level of knowledge, skill and ability of the position.
Your qualifications will be evaluated on the following knowledge, skills, abilities (KSAs) and other characteristics that are relevant to the duties of this position and must be fully supported by information in your resume:
- Skill in applying principles, methods, and/or tools for developing, scheduling, coordinating, monitoring, evaluating, and managing projects and resources, including technical performance.
- Knowledge of the concepts, principles, and theories of engineering and their practical applications.
- Knowledge of various types of contracts, techniques for contracting or procurement, and contract negotiation and administration.
- Skill in preparing, justifying, and/or administering the budget for program areas, to include monitoring expenditures to ensure cost effective support of programs and policies.
Application of Veterans Preference: The Category Rating Method does not add veterans' preference points or apply the "rule of three," but protects the rights of veterans by placing them ahead of non-preference eligibles within each pre-defined quality category. Preference eligibles who meet minimum qualification requirements and who have a compensable service-connected disability of at least 10 percent (i.e., CPS and CP) must be listed in the highest quality category, except when the position being filled is scientific or professional at the GS-09 grade level or higher.
Agency Career Transition Assistance Program (CTAP) or Interagency Career Transition Assistance Program (ICTAP) candidates must be rated "Well Qualified" for the position to receive consideration for special priority.
Applicants must meet all the qualification requirements and submit any required supporting documentation by the closing date of this announcement. Applicants found to be among the top qualified candidates will be referred to the hiring official for further consideration and possible interview.
To preview questions please click here.
Background checks and security clearance
Drug test required
All required documents listed below, that are applicable to you, must be submitted to our automated system "Gateway to State" by 11:59 p.m. Eastern Time (ET) on the closing date of this announcement.
1. Resume - your resume or any other written format you choose should contain the required information as specified in the "How You Will Be Evaluated" section. Insufficient information will result in an ineligible rating.
2. A completed online job specific self-assessment questionnaire through the Department's automated system "Gateway to State".
3. Transcripts - if applicable, see the Qualifications section of the announcement. If selected, an official/sealed college transcript(s) will be required to verify education prior to employment.
4. If you are qualifying based on other criteria listed under the Qualification Section of this announcement, you MUST submit the required supporting documentation (certificates, certifications, etc.) with your application.
5. Veterans Preference - If claiming veteran's preference, you must indicate the type of veteran's preference you are claiming on your resume.
For 5-point veteran's preference, you must provide a copy of your DD-214 Certificate of Release or Discharge from Active Duty (Member Copy 4 is preferable) which must show the type of discharge and dates of active duty. If you are currently on active duty, you must provide a certification on letterhead from your military branch which contains your military service dates, expected date of discharge or release, and the character of service to show that your military service was performed under honorable conditions. The expected date of discharge or release must be no later than 120 days after the certification is submitted for consideration for this vacancy announcement. If the appropriate information is not submitted to confirm your current or expected discharge status, dates of service, etc., you will not receive credit for the claimed active duty military service.
For 10-point veteran's preference, in addition to the DD-214 or certification, you must also submit a current version of the SF-15 (Application for 10-Point Veteran Preference), dated October 2013, and any documentation required by this form to support your claim. Previous editions of the SF-15 will not be accepted. If we cannot verify your 10-point preference status, you will receive 5-point preference if veterans' preference requirements have been met. For further information regarding Veterans, click here.
For Sole Survivorship preference, you must provide a copy of your DD-214 (Member Copy 4 is preferable) or another form of official documentation which shows your discharge or release from active duty occurred on or after August 29, 2008 and was based on a sole survivorship discharge.
To gain access to your DD214 online, please visit: http://www.archives.gov/veterans/military-service-records/get-service-records.html
6. CTAP/ICTAP eligibles must submit a copy of the appropriate documentation with their application. See links below:
If you are relying on your education to meet qualification requirements:
Education must be accredited by an accrediting institution recognized by the U.S. Department of Education in order for it to be credited towards qualifications. Therefore, provide only the attendance and/or degrees from schools accredited by accrediting institutions recognized by the U.S. Department of Education.
Failure to provide all of the required information as stated in this vacancy announcement may result in an ineligible rating or may affect the overall rating.
A career with the U.S. Government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Learn more about federal benefits.
Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time, or intermittent. Contact the hiring agency for more information on the specific benefits offered.
How to Apply
Prepare your application in USAJOBS
To start your application, click Apply and we’ll walk you through the process where you’ll attach a resume and any required documents.
During the application process you can review, edit, delete, and update your information. We’ll automatically save your progress as you go, so you won’t lose any changes.
Please carefully read all the instructions before you apply. You have until 11:59 p.m. Eastern Time (ET) on the closing date of this announcement to complete the application process.
STEP 1: Select the "Apply On-line" button and follow the instructions to register or sign into USAJOBS.
STEP 2: Submit a detailed resume or any other written format you choose documenting your job-related qualifications, experience, and education (if applicable). Cover letter is optional. If you submit a cover letter, you must also submit a resume. Please see the How You Will Be Evaluated section for specific information that should be outlined in your resume.
STEP 3: Answer the job-specific self-assessment questions on-line through the U.S. Department of State’s Gateway to State automated application system. The questions will be used to evaluate your qualifications and experience for this position.
STEP 4: Submit all required documentation applicable to you, as listed in the Required Documents section of this announcement, to the Department’s Gateway to State automated application system prior to the closing date of this announcement. For instructions on how to view the status of your supporting documentation, please click
Technical assistance with your on-line application is available through the Help Desk at email@example.com or by calling (866) 656-6830 or (703) 269-4944 between the hours of 7:00 a.m. and 7:00 p.m. ET
ALTERNATE APPLICATION PROCEDURES
NOTE: If applying online poses an extreme hardship, you may request alternate application procedures to submit your application package by fax. Contact the Human Resources office listed on the announcement between the business hours of 8:15 a.m. and 5:00 p.m. ET at least 2 working days prior to the closing date of this announcement. The application package for alternate application procedures must be submitted and received in the Human Resources office no later than 11:59 p.m. ET on the closing date of this announcement. Paper applications and information sent by mail WILL NOT BE ACCEPTED.
Agency contact information
AddressU.S. Department of State
1999 Dyess Avenue
Charleston, District of Columbia 29405
After all application packages have been received, we will review your resume to ensure you meet the basic qualification requirements. After we review and evaluate all applications, the most highly qualified candidates will be referred to the hiring manager for further consideration for possible interviews in approximately two weeks after the announcement closes. After a tentative job offer, we will conduct a suitability review and/or security background investigation, which generally takes an average of at least two to six months.
You will be notified up to four times during the hiring process:
1. Upon receipt of your application.
2. Upon minimum qualification determinations.
3. After the certificate is issued.
4. After final selection is made.
For instructions on how to view the status of your application, please click here .
Multiple positions may be filled from this announcement.
Fair & Transparent
The Federal hiring process is setup to be fair and transparent. Please read the following guidance.
Equal Employment Opportunity Policy
The United States Government does not discriminate in employment on the basis of race, color, religion, sex (including pregnancy and gender identity), national origin, political affiliation, sexual orientation, marital status, disability, genetic information, age, membership in an employee organization, retaliation, parental status, military service, or other non-merit factor.
Reasonable Accommodation Policy
Federal agencies must provide reasonable accommodation to applicants with disabilities where appropriate. Applicants requiring reasonable accommodation for any part of the application process should follow the instructions in the job opportunity announcement. For any part of the remaining hiring process, applicants should contact the hiring agency directly. Determinations on requests for reasonable accommodation will be made on a case-by-case basis.
A reasonable accommodation is any change to a job, the work environment, or the way things are usually done that enables an individual with a disability to apply for a job, perform job duties or receive equal access to job benefits.
Under the Rehabilitation Act of 1973, federal agencies must provide reasonable accommodations when:
- An applicant with a disability needs an accommodation to have an equal opportunity to apply for a job.
- An employee with a disability needs an accommodation to perform the essential job duties or to gain access to the workplace.
- An employee with a disability needs an accommodation to receive equal access to benefits, such as details, training, and office-sponsored events.
You can request a reasonable accommodation at any time during the application or hiring process or while on the job. Requests are considered on a case-by-case basis.
Legal and regulatory guidance
This job originated on www.usajobs.gov. For the full announcement and to apply, visit www.usajobs.gov/GetJob/ViewDetails/521974600. Only resumes submitted according to the instructions on the job announcement listed at www.usajobs.gov will be considered.