This job originated on www.usajobs.gov. For the full announcement and to apply, visit www.usajobs.gov/job/519950000. Only resumes submitted according to the instructions on the job announcement listed at www.usajobs.gov will be considered.
This position is located in the Department of Manufacturing, Office of Environmental, Safety and Health.
Learn more about this agency12/19/2018 to 01/22/2019
$114,590 - $148,967 per year
GS 14
1 vacancy in the following location:
Yes—as determined by the agency policy.
Occasional travel - One to Five days per month.
No
Permanent - Full-time
Full-time - Career/Career Conditional
Competitive
14
No
No
19-MINT-71
519950000
Current or former competitive service federal employees.
Federal employees who meet the definition of a "surplus" or "displaced" employee.
Certain current or former term or temporary federal employees of a land or base management agency.
Individuals eligible under a special authority not listed above, but defined in the federal hiring regulations.
All candidates who are: Current or former federal employees qualifying as Status Candidates, VEOA eligibles, CTAP/ICTAP eligibles, eligible for special hiring authorities (e.g., the Schedule A appointment for persons with disabilities, or covered by an Interchange Agreement). Land Management employees eligible under Public Law 114-47.
If you do not meet any of the categories listed above, you may wish to apply under announcement 19-MINT-72-P, which is open for any U.S. citizen to apply. Please refer to that announcement for details on open period, eligibility, and how to apply.
As a Safety Engineer, you will:
Serve as a technical authority in occupational and industrial safety for both the United States Mint and contractors concerning safety issues.
Review occupational safety analyses, assessments, and other occupational safety documentation for compliance with applicable requirements.
Evaluate the adequacy of, and make any necessary recommendations regarding, facilities and equipment using established standards, and determine compliance to prevent failure or injury.
Review proposed and existing program documents for scope, content, and adequacy; and recommend improvements in occupational and industrial safety practices and procedures.
Develop solutions to problems involving substantial modification of existing standards and practices, methods, and techniques, utilizing in-depth knowledge of physical phenomena, engineering, and scientific concepts related to occupational safety.
The experience may have been gained in either the public or private sector or volunteer service. One year of experience refers to full-time work; part-time work is considered on a prorated basis. Be sure all experience is documented in your resume by indicating place of employment, job title, length of time performing the duties, and the name and contact information for the supervisor. We must be able to verify this experience in your resume in order for you to receive credit.
You must meet the following requirements within 14 days of the closing date of this announcement.
Specialized experience: For the GS-14, you must have one year of specialized experience at a level of difficulty and responsibility equivalent to the GS-13 grade level in the Federal service. Specialized experience for this position includes:
- Ensuring program compliance with all federal, state and local laws and regulations; OR
- Assessing safety risks and suggesting changes to reduce these risks; OR
- Developing long-term and short-term plans to improve an organization's safety posture.
In addition to the above requirements, you must meet the following time-in-grade requirement, if applicable:
For the GS-14, you must have been at the GS-13 level for 52 weeks.
Education Requirements: A. Degree: Engineering. To be acceptable, the program must: (1) lead to a bachelors degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.
OR
B. Combination of education and experience -- college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:
1. Professional registration or licensure -- Current registration as an Engineer Intern (EI), Engineer in Training (EIT)1, or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.
2. Written Test -- Evidence of having successfully passed the Fundamentals of Engineering (FE)2 examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico.
3. Specified academic courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A.
4. Related curriculum -- Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelors degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all inclusive.)
The education generally must be from an accredited (or pre-accredited) college or university recognized by the U.S. Department of Education.
- We may select from this announcement or any other source to fill one or more vacancies.
- This is a bargaining unit position.
- We offer opportunities for telework.
CONDITIONS OF EMPLOYMENT:
- A one year probationary period may be required.
- Must successfully complete a background investigation.
- Complete a Declaration for Federal Employment to determine your suitability for Federal employment, at the time requested by the agency.
- If you are a male applicant born after December 31, 1959, certify that you have registered with the Selective Service System or are exempt from having to do so.
- Have your salary sent to a financial institution of your choice by Direct Deposit/Electronic Funds Transfer.
- Go through a Personal Identity Verification (PIV) process that requires two forms of identification from the Form I-9. Federal law requires verification of the identity and employment eligibility of all new hires in the U.S.
- Obtain and use a Government-issued charge card for business-related travel.
You will be evaluated for this job based on how well you meet the qualifications above.
Your application includes your résumé, responses to the online questions, and required supporting documents. Please be sure that your résumé includes detailed information to support your qualifications for this position; failure to provide sufficient evidence in your résumé may result in a “not qualified” determination.
Rating: Your application will be evaluated in the following skill areas: Technical and Communication. Your application will be rated and ranked among others, based on your responses to the online questions, regarding your experience, education, training, performance appraisals and awards relevant to the duties of this position. A subject matter expert may be used in the evaluation. Your rating may be lowered if your responses to the online questions are not supported by the education and/or experience described in your application.
Referral: If you are among the top qualified candidates, your application may be referred to a selecting official for consideration. You may be required to participate in a selection interview.
If you are a displaced or surplus Federal employee (eligible for the Career Transition Assistance Plan (CTAP)/Interagency Career Transition Assistance Plan (ICTAP)) you must receive a score of 85.0 or better to be rated as “well qualified" to receive special selection priority.
A complete application includes 1. A résumé, 2. Vacancy question responses, and 3. Submission of any required documents. Please note that if you do not provide all required information, as specified in this announcement, you may not be considered for this position (or may not receive the special consideration for which you may be eligible).
All applicants are required to submit a résumé either by creating one in USAJOBS or uploading one of their own choosing. (Cover letters are optional.) To receive full credit for relevant experience, please list the month/date/year and number of hours worked for experience listed on your résumé. We suggest that you preview the online questions, as you may need to customize your résumé to ensure that it supports your responses to these questions. Please view résumé tips.
CURRENT AND FORMER FEDERAL EMPLOYEES -- Documentation Relating to Your Federal Employment:
- Submit a copy of your SF-50, Notification of Personnel Action, which shows your current (or most recent) grade and competitive service status. (The “position occupied” block on the SF-50 should show a “1” and your “tenure” block should show a “1” or “2”.) Current US Mint employees are not required to submit an SF-50.
- Indicate on your application the highest permanent grade you have held; if this grade is different from your current grade, submit a copy of an additional SF-50 showing this grade.
CAREER TRANSITION ASSISTANCE PLAN (CTAP) OR INTERAGENCY CAREER TRANSITION ASSISTANCE PLAN (ICTAP) DOCUMENTATION: If you are a displaced or surplus Federal employee, click CTAP/ICTAP for eligibility and a detailed list of required documents.
If you are applying under a special hiring authority (e.g. Military Spouses, Interchange Agreement, VEOA, VRA, Schedule A Disability, etc.), please see applicant guide for required documentation. In order to be eligible under one of these authorities, you must submit all required documentation as outlined in the applicant guide.
EDUCATION DOCUMENTATION: For positions with an education requirement, or if you are qualifying for this position by substituting education or training for experience, submit a copy of your transcripts or equivalent. An official transcript will be required if you are selected.
A college or university degree generally must be from an accredited (or pre-accredited) college or university recognized by the U.S. Department of Education. For a list of schools which meet these criteria, please refer to Department of Education Accreditation page.
If you are qualifying based on foreign education, you must submit proof of creditability of education as evaluated by a credentialing agency. Refer to the OPM instructions.
Recommended Documents:
In addition, we recommend that you submit copies of the following:
- A list of awards received (if applicable). DO NOT send copies of awards.
- A copy of your most recent completed performance appraisal.
Education must be accredited by an accrediting institution recognized by the U.S. Department of Education in order for it to be credited towards qualifications. Therefore, provide only the attendance and/or degrees from schools accredited by accrediting institutions recognized by the U.S. Department of Education.
Failure to provide all of the required information as stated in this vacancy announcement may result in an ineligible rating or may affect the overall rating.
The United States Mint has partnered with the Treasury's Bureau of the Fiscal Service to provide certain personnel services to its organization. Fiscal Service's responsibilities include advertising vacancies, accepting and handling applications, and extending job offers.
The following instructions outline our application process. You must complete this application process and submit any required documents by 11:59 p.m. Eastern Time (ET) on the closing date of this announcement. We are available to assist you during business hours (normally 8:00 a.m. - 5:00 p.m. ET, Monday - Friday). If applying online poses a hardship, please contact us by noon ET on the announcement's closing date.
The United States Mint provides reasonable accommodation to applicants with disabilities on a case-by-case basis. Please contact us if you require this for any part of the application and hiring process.
To begin, either click the “Create a New Account” button and follow the prompts to register or if you previously registered, click the "Apply Online" button and follow the prompts.
You will be re-directed to The United States Mint's Career Connector system to complete your application process; answer the online questions, and submit all required documents. (To submit supporting documents, click one of the available options; Upload; Fax; or Reuse existing documents. To protect your privacy, we suggest you first remove your SSN). Also, go to “My Account” to view and update your information, as necessary.
To complete, you must click the “Finish” button located at the bottom of the “Application Review” page.
To verify your application is complete, log into your USAJOBS account, select the Application Status link and then select the more information link for this position. The Details page will display the status of your application, the documentation received and processed, and any correspondence the agency has sent related to this application.
To return to an incomplete application, log into your USAJOBS account and click Update Application in the vacancy announcement. You must re-select your resume and/or other documents from your USAJOBS account or your application will be incomplete.
If you are experiencing system issues with your application, please contact the CareerConnector Help Desk at careerconnectorhelp@treasury.gov and/or the USAJOBS Help Desk.
To check the status of your application for this position, please follow these steps:
1. Login to your USAJOBS account, select the "Applications" section and click on the vacancy you would like to view and have already applied for.
2. Under "application status," click "additional application information" and you will be taken to the CareerConnector website where you can check your application status. The "additional application information" link may not be available if your application status says "Unavailable." This indicates that your application is not complete.
If the "additional application information" link is not available and the vacancy is still open, you can click on the job announcement and "Update Application" to be taken back to the CareerConnector portion of the application.
The Federal hiring process is set up to be fair and transparent. Please read the following guidance.
This job originated on www.usajobs.gov. For the full announcement and to apply, visit www.usajobs.gov/job/519950000. Only resumes submitted according to the instructions on the job announcement listed at www.usajobs.gov will be considered.
Learn more about
The U.S. Department of the Treasury has a distinguished history dating back to the founding of our nation. As the steward of U.S. economic and financial systems, Treasury is a major and influential leader in today's global economy. We have over 100,000 employees across the country and around the world. Come Join the Department of the Treasury and Invest in Tomorrow.