This job originated on www.usajobs.gov. For the full announcement and to apply, visit www.usajobs.gov/job/519080800. Only resumes submitted according to the instructions on the job announcement listed at www.usajobs.gov will be considered.
THIS IS A NATIONAL GUARD TITLE 32 EXCEPTED SERVICE POSITION.
This National Guard position is for a SHEET METAL MECHANIC (AIRCRAFT), Position Description Number D1371000 and is part of the ID 124 Maintenance Squadron, Idaho Air National Guard.
THIS POSITION IS INDEFINITE- MAY CONVERT TO A PERMANENT STATUS WITHOUT FURTHER COMPETITION IF POSITION BECOMES AVAILABLE.
THIS POSITION IS ONLY OPEN TO CURRENT MEMBERS OF THE IDAHO AIR NATIONAL GUARD.
12/10/2018 to 12/19/2018
$24.78 - $28.93 per hour
WG 10
1 vacancy in the following location:
No
Occasional travel - You may be expected to travel for this position.
No
Temporary - INDEFINITE- MAY CONVERT TO A PERMANENT STATUS WITHOUT FURTHER COMPETITION IF POSITION BECOMES AVAILABLE
Full-Time
Excepted
10
No
No
ID-10375145-AF-19-042 (T32)
519080800
Current members, those who want to join or transitioning military members.
CURRENT MEMBERS OF THE IDAHO AIR NATIONAL GUARD
This position is located within a National Guard aircraft maintenance organization. Its primary purpose is to accomplish the inspection, repair, modification, installation and troubleshooting of sheet metal, fiberglass, bonded honeycomb and other structural materials and components as well as treatment (i.e., mechanical and chemical), and painting of missiles, aircraft powered and nonpowered Aerospace Ground Equipment (AGE), and monitoring aircraft and equipment washing.
Independently inspects aircraft and determines the nature and extent of repairs to be made, using applicable technical orders as guidelines. Works directly on the aircraft and its components, fulfilling such tasks as removal, repair, modification and installation of parts and assemblies, such as frames, stringers, longerons, bulkheads, beams, ribs, spars, skin, cowling, brackets, faring, access doors, panels and other related items. May be required to clear red "X" conditions.
Repairs cracks in aircraft skin. Fabricates and fits patches to damaged areas, determining repair detail necessary to retain or restore original strength. Fits and trims components to aircraft such as landing gear doors, control surfaces, flaps access doors and other assemblies. Seals structures to make them pressure, water and weather tight.
Troubleshoots aircraft structural repair situations in such areas as fuselage, tails, wings, cowlings, and stabilizers. Removes, forms, fits, and installs highly stressed and double contoured skins, using hand or powered drilling and cutting tools and other metal working equipment. Determines shear and bearing load factors during rivet replacement. Installs heads up, regular, heat treated, high shear, and blind type aircraft rivets and fasteners, using pneumatic riveters, special tools and bucking bars. Removes damaged or broken fasteners and receptacles.
Aligns and balances component structures and airframe using precision measuring instruments and levels. Performs metal-to-metal bonding where delamination of surfaces and core material occurs in control surfaces.
Inspects damage or deterioration and determines repair or replacement of plastic, fiberglass, composites, bonded structures, and bonded honeycomb assemblies using powered and nonpowered tools and equipment. Repairs or replaces retaining frames and installs plastic laminated blanks. Designs and constructs forming fixtures.
Military Grades: E-1 THROUGH E-5
Compatible Military Assignments: 2A7X3 AFSC ONLY
THIS POSITION IS INDEFINITE- MAY CONVERT TO A PERMANENT STATUS WITHOUT FURTHER COMPETITION IF POSITION BECOMES AVAILABLE.
THIS POSITION IS ONLY OPEN TO CURRENT MEMBERS OF THE IDAHO AIR NATIONAL GUARD.
GENERAL EXPERIENCE:
Work involves the fabrication, modification, repair, assembly, and installation of sheet metal parts, items, and assemblies. Metals include but are not restricted to galvanized and black iron, aluminum and aluminum alloys, stainless steel, copper, and brass sheets, lead alloys and bronze.
Minimum Requirements: WG - Experience or training that has provided the candidate with the ability to plan, manufacture, and install cylindrical, square, or rectangular-shaped objects that have easily constructed fastenings such as single and double-hem edges and single, double or grooved seams.
SPECIALIZED EXPERIENCE:
Must have at least 18 months of experience or training in planning, layout, and construction skills to manufacture items and systems with dovetailed seams, set-in-bottom seams, burred-bottom seams, or wired or lock seams. Experience using more complicated shop tools and equipment. Experience in using metals including stainless steel, copper sheet, magnesium, honeycomb material and alloys. Experience demonstrating the use of more complicated mathematical calculations and complicated measuring instruments.
There are no additional education requirements required for this position.
If you are a male applicant who was born after 12/31/1959 and are required to register under the Military Selective Service Act, the Defense Authorization Act of 1986 requires that you be registered or you are not eligible for appointment in this agency (https://www.sss.gov/RegVer/wfRegistration.aspx).
If you are unable to apply online or need to fax a document you do not have in electronic form, view the following link for information regarding an Alternate Application.
More than one selection may be made from this announcement if additional identical vacancies in the same title, series, grade and unit occur.
You will be evaluated for this job based on how well you meet the qualifications above.
Once the announcement has closed, your resume and supporting documentation will be used to determine if you meet the qualifications listed on this announcement. If you are minimally qualified, your resume and supporting documentation will be compared to your responses on the assessment questionnaire to determine your level of experience. If you rate yourself higher than is supported by your application package, your responses may be adjusted and/or you may be excluded from consideration for this position. If you are found to be among the top qualified candidates, you will be referred to the selecting official for employment consideration.
To apply for this position, you must submit a complete Application Package which includes:
1. Your resume showing work schedule, hours worked per week, dates (including Month and Year, e.g., 02/2017, Feb 2017, etc.) of employment and duties performed.
2. Other supporting documents: Air Personnel RIP- Located on vMPF.
Education must be accredited by an accrediting institution recognized by the U.S. Department of Education in order for it to be credited towards qualifications. Therefore, provide only the attendance and/or degrees from schools accredited by accrediting institutions recognized by the U.S. Department of Education.
Failure to provide all of the required information as stated in this vacancy announcement may result in an ineligible rating or may affect the overall rating.
To apply for this position, you must complete the online application/Occupational Questionnaire and submit the documentation specified in the Required Documents section below. To view the Occupational Questionnaire, click the following link: https://apply.usastaffing.gov/ViewQuestionnaire/10375145
A complete application package must be submitted by 11:59 PM (EST) on the closing date of the announcement to receive consideration.
To begin, click Apply to access the online application. You will need to be logged into your USAJOBS account to apply. If you do not have a USAJOBS account, you will need to create one before beginning the application.
Follow the prompts to select your resume and/or other supporting documents to be included with your application package. You will have the opportunity to upload additional documents to include in your application before it is submitted. Your uploaded documents may take several hours to clear the virus scan process.
After acknowledging you have reviewed your application package, complete the Include Personal Information section as you deem appropriate and click to continue with the application process.
You will be taken to the online application which you must complete in order to apply for the position. Complete the online application, verify the required documentation is included with your application package, and submit the application.
To verify the status of your application, log into your USAJOBS account (https://my.usajobs.gov/Account/Login), all of your applications will appear on the Welcome screen. The Application Status will appear along with the date your application was last updated. For information on what each Application Status means, visit: https://www.usajobs.gov/Help/how-to/application/status/.
Once your online application is submitted you will receive a confirmation notification by email. Your application will be evaluated by the Human Resources Office to determine your eligibility for the position. After the evaluation is complete, you will receive another notification regarding the status of your application.
The Federal hiring process is set up to be fair and transparent. Please read the following guidance.
This job originated on www.usajobs.gov. For the full announcement and to apply, visit www.usajobs.gov/job/519080800. Only resumes submitted according to the instructions on the job announcement listed at www.usajobs.gov will be considered.
Learn more about
THIS IS A NATIONAL GUARD TITLE 32 EXCEPTED SERVICE POSITION.
The National Guard is the oldest component of the Armed Forces of the United States. Since the earliest American colonial days, citizens have joined together for collective defense. We have a proud tradition of coming to the aid of our friends and neighbors in times of serious emergencies. Join our National Guard team and serve your nation, your states and your community!