This job originated on www.usajobs.gov. For the full announcement and to apply, visit www.usajobs.gov/job/483586900. Only resumes submitted according to the instructions on the job announcement listed at www.usajobs.gov will be considered.
This National Guard position is for a NONDESTRUCTIVE TESTER, Position Description Number D2320000 and is part of the ID 124 Maintenance Squadron, 124 MXS Idaho Air National Guard.
INDEFINITE- MAY CONVERT TO A PERMANENT STATUS WITHOUT FURTHER COMPETITION IF POSITION BECOMES AVAILABLE- CONCURRENT WITH AGR ANNOUNCEMENT #18-02
THIS POSITION IS ONLY OPEN TO CURRENT MEMBERS OF THE IDAHO AIR NATIONAL GUARD
The National Guard is the oldest component of the Armed Forces of the United States. Since the earliest American colonial days, citizens have joined together for collective defense. We have a proud tradition of coming to the aid of our friends and neighbors in times of serious emergencies. Join our National Guard team and serve your nation, your states and your community!
NATIONAL GUARD MEMBERSHIP IS REQUIRED: This is an excepted service position that requires membership in a compatible military assignment in the National Guard. Selectee will be required to wear the military uniform. Acceptance of an excepted service position constitutes concurrence with these requirements as a condition of employment. Applicants who are not currently a member of the National Guard must be eligible for immediate membership and employment in the National Guard in the military grade listed in this announcement.
11/03/2017 to 12/03/2017
$24.27 - $28.33 per hour
WG 10
1 vacancy in the following location:
Occasional travel - You may be expected to travel for this position.
No
Temporary - INDEFINITE- MAY CONVERT TO A PERMANENT STATUS WITHOUT FURTHER COMPETITION IF POSITION BECOMES AVAILABLE-CONCURRENT WITH AGR ANNOUNCEMENT #18-02
Full-Time
10
No
ID-10075853-AF-17-199
483586900
As a NONDESTRUCTIVE TESTER, WG-3705-10, you will:
Be located in the Non-Destructive Inspection Section n of an Air National Guard aircraft Maintenance Group, Maintenance Squadron, Fabrication Flight. This is an Air National Guard (ANG) Dual Status Technician position requiring military membership, compatible military skill assignment, and classification. The primary purpose of this position is to inspect aerospace weapon systems components and support equipment for structural integrity using nondestructive inspection methods and performs fluid analysis.
Determines test method, and prepares fluids and parts for nondestructive inspection. Interprets nondestructive inspection test results, and provides information about defects to repair center. Performs Oil Spectrometry process and analyzes wear metal content on engine lubricating oil and other fluids, and recommends corrective action. Establishes radiation areas for radiographic operations. Computes and monitors personal exposure areas for radiographic operations, and monitors personnel exposure data.
Performs nondestructive inspection on structures, components, and systems. Detects flaws such as cracks, delaminations, voids, processing defects, and heat damage using penetrant, eddy current, magnetic particle, radiographic, optical, Thermography, Shearography and ultrasonic test equipment. Determines metallurgical information of components according to alloy, temper, conductivity, and associated factors. May also serve as Alternate TMDE Monitor, PCAMS, Alternate Equipment Custodian, Alternate Supplies Manager, Alternate Hazardous Waste Monitor, Alternate Hazardous Communication Monitor, Alternate Spill Prevention Monitor, Alternate FOD Monitor, Alternate Radiation Monitor, Alternate Technical Order Monitor, Alternate Precious Metals Monitor, and Training Monitor.
Applies magnetic particle and/or liquid penetrant inspection to detect and interpret the relevancy of flaws in a variety of parts. Parts are numerous and varied, and are of ferrous and/or nonferrous metals, and consist of surface or near surface discontinuities in the metal; e.g., fatigue cracks, welding overlap, cold shut, or surface cracks that may stem from internal flaws, such as pipes, inclusions, or forging lap. Sets up each different liquid penetrant or magnetic particle method following Technical Orders (TOs), Time Change Technical Orders (TCTOs), or Work Control Documents (WCDs), or Nondestructive Testing Instructions (NDIs). Ensures the equipment and solutions are in compliance with technical guides and quality standards before performing tests and must submit an AFTO 22 if defects in TO's exist or an AF 107 if there is no technical data to accompany the task. Performs all processing tasks; i.e., dipping items in penetrant or magnetic particle baths, washing and drying, magnetizing and demagnetizing ferrous items, and subjecting them to Ultra Violet Black light to detect and evaluate flaws, their nature, size, scope, and exact location. If items are repairable, records test results, and marks defect areas and dimensions. Initiates WCDs that specify the needed repairs. Re-inspects all repairs performed on each component upon their return to the shop.
Uses and maintains tools. Maintains bench stock levels of parts, materials, tools, and equipment at prescribed levels. Uses tools and equipment associated with testing being conducted in the shop, as well as hand and power tools to do the work.
Utilizes safety practices and procedures following established safety rules and regulations to maintain a safe and clean work environment. Uses and assures proper fit of required Personal Protective Equipment and clothing. Follows federal and state rules when storing, using, handling, labeling, and disposing of hazardous materials and waste in accordance with environmental standards. Performs clean-up duties, such as cleaning equipment, sweeping, straightening, and lining up tools and other property in the assigned area.
MILITARY REQUIREMENTS:
Compatible military grade and assignment required prior to the effective date of placement. This is an excepted service position that requires membership in a compatible military assignment in the employing state's National Guard. Applicants who are not currently a member of the National Guard must be eligible for immediate membership. If you are not sure you are eligible for military membership, please contact a National Guard recruiter prior to applying for this position.
Military Grades: E1 through E7
Compatible Military Assignments: 2A7X2 ONLY
INDEFINITE- MAY CONVERT TO A PERMANENT STATUS WITHOUT FURTHER COMPETITION IF POSITION BECOMES AVAILABLE- CONCURRENT WITH AGR ANNOUNCEMENT #18-02
THIS POSITION IS ONLY OPEN TO CURRENT MEMBERS OF THE IDAHO AIR NATIONAL GUARD
Participation in direct deposit is mandatory.
There are no additional education requirements required for this position.
If you are a male applicant who was born after 12/31/1959 and are required to register under the Military Selective Service Act, the Defense Authorization Act of 1986 requires that you be registered or you are not eligible for appointment in this agency (https://www.sss.gov/RegVer/wfRegistration.aspx).
If you are unable to apply online or need to fax a document you do not have in electronic form, view the following link for information regarding an Alternate Application.
You will be evaluated for this job based on how well you meet the qualifications above.
Once the announcement has closed, your resume and supporting documentation will be used to determine if you meet the qualifications listed on this announcement. If you are minimally qualified, your resume and supporting documentation will be compared to your responses on the assessment questionnaire to determine your level of experience. If you rate yourself higher than is supported by your application package, your responses may be adjusted and/or you may be excluded from consideration for this position. If you are found to be among the top qualified candidates, you will be referred to the selecting official for employment consideration.
To apply for this position, you must submit a complete Application Package which includes:
1. Your resume showing work schedule, hours worked per week, dates (including Month and Year, e.g., 02/2017, Feb 2017, etc.) of employment and duties performed.
2. Other supporting documents: Air Personnel RIP- located on vMPF
Education must be accredited by an accrediting institution recognized by the U.S. Department of Education in order for it to be credited towards qualifications. Therefore, provide only the attendance and/or degrees from schools accredited by accrediting institutions recognized by the U.S. Department of Education.
Failure to provide all of the required information as stated in this vacancy announcement may result in an ineligible rating or may affect the overall rating.
To apply for this position, you must complete the online application/Occupational Questionnaire and submit the documentation specified in the Required Documents section below. To view the Occupational Questionnaire, click the following link: https://apply.usastaffing.gov/ViewQuestionnaire/10075853~
A complete application package must be submitted by 11:59 PM (EST) on the closing date of the announcement to receive consideration.
To begin, click Apply to access the online application. You will need to be logged into your USAJOBS account to apply. If you do not have a USAJOBS account, you will need to create one before beginning the application.
Follow the prompts to select your resume and/or other supporting documents to be included with your application package. You will have the opportunity to upload additional documents to include in your application before it is submitted. Your uploaded documents may take several hours to clear the virus scan process.
After acknowledging you have reviewed your application package, complete the Include Personal Information section as you deem appropriate and click to continue with the application process.
You will be taken to the online application which you must complete in order to apply for the position. Complete the online application, verify the required documentation is included with your application package, and submit the application.
To verify the status of your application, log into your USAJOBS account (https://my.usajobs.gov/Account/Login), all of your applications will appear on the Welcome screen. The Application Status will appear along with the date your application was last updated. For information on what each Application Status means, visit: https://www.usajobs.gov/Help/how-to/application/status/.
Once your online application is submitted you will receive a confirmation notification by email. Your application will be evaluated by the Human Resources Office to determine your eligibility for the position. After the evaluation is complete, you will receive another notification regarding the status of your application.
The Federal hiring process is set up to be fair and transparent. Please read the following guidance.
This job originated on www.usajobs.gov. For the full announcement and to apply, visit www.usajobs.gov/job/483586900. Only resumes submitted according to the instructions on the job announcement listed at www.usajobs.gov will be considered.
Learn more about