This job originated on www.usajobs.gov. For the full announcement and to apply, visit www.usajobs.gov/job/467970500. Only resumes submitted according to the instructions on the job announcement listed at www.usajobs.gov will be considered.
NATIONAL GUARD MEMBERSHIP REQUIRED
POSITION DESCRIPTION # D2240P01
This position works within an Air National Guard Aviation Wing, Maintenance Group, Maintenance Squadron, Component Repair Flight, Avionics Element, COMMUNICATIONS/NAVIGATION and GUIDANCE AND CONTROL shop that supports XC-130H/J, C-17, C-5, C-40, MC-12 and KC-46 aircraft. It is an Air National Guard dual status technician position that requires military membership, compatible military skill assignment and classification. The primary purpose of this position is to install, modify, overhaul, maintain, troubleshoot, repair, align, calibrate, and rebuild multi-system avionics complexes consisting of multiple completely integrated electronic avionics systems where the complex accomplishes a number of major functions. The worker in this career field must demonstrate the ability to perform on-or-off equipment maintenance on one or more complete electronic integrated systems associated with the assigned aircraft and/or maintenance on automatic flight control systems, instrument systems, inertial and radar navigation systems.
DO NOT SEND APPLICATIONS TO THE ADDRESS LISTED BELOW
Apply using the instructions in the "How to Apply" section
The Ohio National Guard is an Equal Opportunity Employer
Learn more about this agency04/21/2017 to 05/08/2017
$27.59 - $32.22 per hour
WG 13
2 vacancies in the following location:
Not required
No
Permanent
Full-time - Full Time
No
JA 17-123-C
467970500
Performs scheduled and unscheduled maintenance on one or more multi-complex electronic integrated systems. Completes operational checks, inspections, tests, trouble shooting, removal and replacement of Line Replaceable Units (LRUs) which are linked with integrated systems and LRUs which are independent or associated with nonintegrated systems. Isolates unusual malfunctions using technical orders, schematics, wiring diagrams, tools, and test equipment including automatic test equipment and Flight Line Test Systems (FLTS). Solves complex problems by analyzing installation, circuitry, and operating characteristics of the systems. Adjusts and aligns system sensors, transmitters, amplifiers, power supplies, display devices, controls, transponders, actuators, servos, computers and other related components. Installs serviceable components into aircraft and performs total systems alignment and harmonization in accordance with existing technical orders and directives. Accomplishes technical order compliances, modification of components/systems and completes thorough system checks for proper operation. Maintains, modifies, calibrates and inspects a wide variety of user test, measurement, and diagnostic equipment (TMDE). Installs, modifies, overhauls, maintains, troubleshoots, repairs, rebuilds, aligns, and calibrates complete electronic avionics multi-systems control. Demonstrates a thorough working knowledge of complex aircraft avionics and or ECM systems such as the electronics package in a highly automated aircraft where the integrated flight and Integrated Countermeasures System, electronic multiplex communications bus, Inertial Navigation System, multi-function displays, head-up display, data transfer equipment, Global Positioning System, Situation Awareness Data-Link (SADL), Data Modem, Flight Control System, pitot-static system and related instrumentation, flight director instrumentation, Central Air Data Computer, engine, hydraulic and fuel quantity indicating systems, voice message warning, VHF, UHF, SATCOM Data, intercom, secure voice communications, Identification Friend or Foe (IFF), and Tactical Air Navigation System (TACAN). Evaluates operational characteristics of the integrated systems by observing and analyzing waveforms, voltage, current, power indications, computer registers and printouts. Analyzes the malfunctions encountered through fault codes, determines repair sequence process and performs the repairs. (30%)
**** A more comprehensive detailed description of the position may be found in Position Description "D224P01" in the employing unit or in the Human Resources Office ****
Requirements
This position is being announced in accordance with state merit promotion procedures and collective bargaining agreement. Wearing of the appropriate military uniform is required while employed in this position. Permanent change of duty station (PCS) funds are not available.
If you are an AGR and are selected for this position, you will be required to vacate your AGR status.
Successful applicant will be assigned to a compatible military position in an appropriate unit of assignment in the Ohio National Guard.
Military Membership in the Ohio National Guard is required
If you are willing to take a demotion to be considered for this position you must clearly indicate your intentions in your resume.
It is not necessary for applicants to possess the MOS/AFSC listed as compatible to the position in order to apply. It is, however, the applicant's responsibility to acquire a compatible MOS/AFSC within 1 year of appointment. Coordinate with your unit's training representative to determine whether or not you can qualify for a specific MOS/AFSC and/or receive training.
General Experience: Experience or training which demonstrates the applicants knowledge of electronic theories and practices to identify, isolate and repair malfunctions in one or more complex integrated systems where knowledge of the entire system is necessary to interpret error data and trace back through a number of units of the system to locate deficiencies. Thorough knowledge of principles of digital and analog circuits, electro-mechanical devices, solid state devices, digital techniques, synchro/servo operation and integrated circuit theory.
Ability to interpret and trace schematics, logic and wiring diagrams and use a wide variety of test, measurement, and diagnostic equipment (TMDE)
.Specialized Experience:(WG-2610-13)
1. Experience or training in utilizing principles, basic functions and application of theory of electronic integrated systems equipment.
2. Experience in diagnosing problems and determining needed repairs for malfunctions in electronic integrated systems equipment.
3. Experience in making mechanical repairs that required the use of precision measuring and calibrating equipment.
4. Experience in using a wide variety of test, measurement, and diagnostic equipment (TMDE).
5. Experience which demonstrates the ability to interpret technical manuals, specifications, and publications.
1. Do not send applications to the mailing address or email address on this announcement. Apply only online or via the fax number provided in the section entitled "How to Apply."
2. If you are a current career or career-conditional Federal employee or former Federal employee who has reinstatement eligibility, you must submit a copy of your latest SF-50 "Notification of Personnel Action" and/or a copy of the SF-50 that reflects career or career-conditional tenure, or you will not be considered under the merit promotion process. Also, you should submit your most recent performance appraisal.
3. If you are a male applicant who was born after 12/31/59 and are required to register under the Military Selective Service Act, the Defense Authorization Act of 1986 requires that you be registered or you are not eligible for appointment in this agency.
You will be evaluated for this job based on how well you meet the qualifications above.
Once the application process is complete, a review of your application will be made to ensure you meet the job requirements. To determine if you are qualified for this job, a review of your resume and supporting documentation will be made and compared against your responses to the occupational questionnaire. If, after reviewing your resume and/or supporting documentation, a determination is made that you have inflated your qualifications and/or experience your qualifications rating can and will be adjusted to more accurately reflect your abilities. Please follow all instructions carefully. Errors or omissions may affect your rating and may result in you not being considered for appointment to this position.
All applications must include the following information:
Your application may need to include:
NOTE: Applicants are HIGHLY ENCOURGED to use the USAJOBS Resume Builder to apply for this position. Do not submit an OF-612; it is obsolete and no longer accepted. If you choose to use your personal resume; please ensure that your resume contains your full name, address, phone number and at least your last four digits of your social security number.
Please do not send applications to the addresses listed below
Education must be accredited by an accrediting institution recognized by the U.S. Department of Education in order for it to be credited towards qualifications. Therefore, provide only the attendance and/or degrees from schools accredited by accrediting institutions recognized by the U.S. Department of Education.
Failure to provide all of the required information as stated in this vacancy announcement may result in an ineligible rating or may affect the overall rating.
To apply for this position, you must provide a complete Application Package which includes:
1. Your Resume and any other documents specified in the Required Documents section of this job announcement. (See Required Documents section below)
2. A complete Occupational Questionnaire
The complete Application Package must be submitted by 11:59 (EST) on Monday, May 08, 2017.
To begin the process, click the Apply Online button to create an account or log into your existing USAJOBS account. Follow the prompts to select your USAJOBS resume and/or other supporting documents and complete the Occupational Questionnaire. Please ensure you click the Submit My Answers link to submit your application package.
It is your responsibility to ensure your responses and appropriate documentation is submitted prior to the closing date.
NOTE: To verify your application is complete, log into your USAJOBS account, https://my.usajobs.gov/Account/Login , select the Application Status link and then click on the More Information link for this position. The Details page will display the status of your application, the documentation received and processed, and any correspondence the agency has sent related to this application. Your uploaded documents may take several hours to clear the virus scan process.
To return to an incomplete application, long into your USAJOBS account and click Update Application in the vacancy announcement. You must re-select your resume and/or other documents from your USAJOBS account or your application will be incomplete.
You are encouraged to apply online. Applying online will allow you to review and track the status of your application.
To fax supporting documents you are unable to upload, complete this cover page http://staffing.opm.gov/pdf/usascover.pdf using the following Vacancy ID 1944575. Fax your documents to 1-478-757-3144.
If you cannot apply online:
1. Click the following link to view and print the Occupational Questionnaire View Occupational Questionnaire
2. Print this 1203FX form to provide your response to the occupational questionnaire http://www.opm.gov/forms/pdfimage/opm1203fx.pdf
3. Fax the completed 1203FX form along with any supporting documents to 1-478-757-3144. Your 1203FX will serve as a cover page for your fax transmission.
Once the online questionnaire is received you will receive an acknowledgement email that your submission was successful. After a review of your complete application is made you will be notified of your qualification status and/or referral to the hiring official. If further evaluation or interviews are required you will be contacted.
Instructions for completing the OPM 1203-FX:
If you are applying to this announcement by completing the OPM 1203-FX form instead of using the Online Application method, please use the following step-by-step instructions as a guide to filling out the required questionnaire. You will need to print the vacancy announcement and refer to it as you answer the questions. You may omit any optional information; however, you must provide responses to all required questions. Be sure to double check your application before submission.
The Federal hiring process is set up to be fair and transparent. Please read the following guidance.
This job originated on www.usajobs.gov. For the full announcement and to apply, visit www.usajobs.gov/job/467970500. Only resumes submitted according to the instructions on the job announcement listed at www.usajobs.gov will be considered.
Learn more about
The Ohio National Guard seeks to employ high quality applicants for Federal Technician positions. This position requires military membership in the Ohio National Guard.
Military Unit and Address:
121st ARW/MXS
7370 Minuteman Way
Rickenbacker ANGB
Columbus, OH 43217
USA