This job originated on www.usajobs.gov. For the full announcement and to apply, visit www.usajobs.gov/job/446014300. Only resumes submitted according to the instructions on the job announcement listed at www.usajobs.gov will be considered.
After you submit your application, return to your USAJOBS account to check the status of your application. Status updates are available on your profile dashboard. Your application will be reviewed to make sure you're eligible and meet the qualifications for the position. If qualifications are met, your application will be referred to the hiring official and your status will be updated to "Referred" on your profile dashboard. All other applicants (not being considered) will receive a "Not Referred" status.
This position is located at the 149th FW, Kelly Field, San Antonio, TX. The purpose of this position is to inspect, repair, modify, and service aircraft systems, components, and assemblies, both on- and off-aircraft.
Appointment Factor(s): This is an Excepted Service position that requires active membership in a compatible military assignment in the Texas Air National Guard and wear of the military uniform. Applicants who are not currently a member of the Texas Air National Guard must be eligible for immediate membership and employment in the Texas Air National Guard. If you are not sure you are eligible for military membership, please visit http://www.nationalguard.com/eligibility or contact a Texas Air National Guard recruiter at (800) 529-4776 before applying for this position.
Areas of Consideration: Nationwide Excepted. This includes:
-All currently employed full-time permanent, indefinite and temporary personnel of the Texas Air National Guard.
-All current members of the Texas Air National Guard and individuals eligible for membership in the Texas Air National Guard.
Incentives: Acceptance of a military Federal technician position may result in termination and / or repayment of military incentives. Please check your contract and contact your servicing Education Services (Incentives) office or the Recruiting/Retention office.
Rank Spread: This position is open to:
Enlisted - E2 Not to Exceed E5
Remarks:
10/05/2016 to 09/01/2017
$20.85 - $24.34 per hour
WG 10
2 vacancies in the following location:
Not required
No
Permanent
Full-time - Full Time
No
149-16-59
446014300
The full Position Description (PD) can be found at the following link:
Compatible Military Assignment (per UMD): Applicants must be Duty AFSC assigned to a compatible position in accordance with statutes and National Guard Bureau regulations upon selection.
AFSC: 2A3X3
Specialized Experience Required
To qualify at the WG-10 grade level your resume must include relevant experience with beginning and ending dates of employment/experience reflecting at least 18 months experience or training installing, adjusting, aligning, troubleshooting and functionally testing the various major and minor mechanical and pneudraulic systems on an aircraft during overhaul or modification AND experience coordinating the work of other mechanics, and scheduling maintenance to ensure completion of critical actions and optimum workflow AND must have the ability to instruct lower graded mechanics, military and other personnel in the disassembly and re-assembly of crash damaged engines, transmissions, gearboxes, hydraulic components, and fuel controls sufficient for the exhibit to be returned to its shipping container.
If you are a male applicant who was born after 12/31/59 and are required to register under the Military Selective Service Act, the Defense Authorization Act of 1986 requires that you be registered or you are not eligible for appointment in this agency.
You will be evaluated for this job based on how well you meet the qualifications above.
Once the application process is complete, a review of resume and supporting documentation will be made and compared against your responses to the assessment questionnaire to determine if you are qualified for this job. If, after reviewing your resume and/or supporting documentation, a determination is made that you have inflated your qualifications and or experience, you may lose consideration for this position.
Please follow all instructions carefully. Errors or omissions may affect your eligibility.
Resume
Education must be accredited by an accrediting institution recognized by the U.S. Department of Education in order for it to be credited towards qualifications. Therefore, provide only the attendance and/or degrees from schools accredited by accrediting institutions recognized by the U.S. Department of Education.
Failure to provide all of the required information as stated in this vacancy announcement may result in an ineligible rating or may affect the overall rating.
To apply for this position, you must provide both of the following parts:
1. Your responses to the Qualifications Questionnaire, and
2. Your resume and any other documents specified in the Required Documents section of this job announcement.
Your resume must have complete information: Please ensure your resume accurately reflects the duties and responsibilities under each position you have held with each employer. In describing your experience, please be clear and specific. It is your responsibility to make sure your resume states complete information for each job entry (beginning and ending dates of employment stated as MM/YYYY; and total hours worked per week). If your resume does not provide enough information regarding your work history for us to make a creditable qualification determination, your application package may be rendered disqualified and you will no longer be considered for this position.
Here is a link for aiding you in building your USA-Jobs Resume:https://help.usajobs.gov/index.php/Tips
Use the Online Qualifications Questionnaire for convenience and quickest processing.
View Occupational Questionnaire
Option A: Online Qualifications Questionnaire.
To make sure everything you submitted is successfully received, follow these steps:
1. Log in to your USA-Jobs account using the box on the right side of the page.
2. Click the radio button for this Vacancy Identification Number: 1763678
3. Select a Vacancy
4. Verify that all of your documents appear on the table with a status of Processed.
Option B: Paper Qualifications Questionnaire.
If it is not practical for you to use the Online Qualifications Questionnaire, you can write your answers on paper. Follow these steps:
1. You can access the Questionaire Here: View Occupational Questionnaire
2. Obtain and print a copy of the OPM Form 1203-FX, which you will use to provide your answers. You can obtain the form at this URL: http://www.opm.gov./Forms/pdf_fill/OPM1203fx.pdf or by calling USAJOBS by Phone at (703) 724-1850 after the introduction, press 1, and listen for instructions.
3. You may submit the Form 1203-FX, resume, and any supporting documents by fax.
Once the online questionnaire is received you will receive an acknowledgement email that your submission was successful. After a review of your complete application is made you will be notified whether or not you have been referred to the hiring official. If further evaluation or interviews are required you will be contacted.
The Federal hiring process is set up to be fair and transparent. Please read the following guidance.
This job originated on www.usajobs.gov. For the full announcement and to apply, visit www.usajobs.gov/job/446014300. Only resumes submitted according to the instructions on the job announcement listed at www.usajobs.gov will be considered.
Learn more about
TEXAS MILITARY DEPARTMENT
DUTY: Bear true faith and allegiance to the state and nation; cultivate an environment for all to excel; prepare mentally, physically and spiritually to deploy at home and abroad.
HONOR: Hold the public trust in the highest regard; exceed standards and expectations; act with understanding, innovation, resourcefulness, flexibility and urgency. Do all you can, where you are, with what you have and always place the welfare of those you lead first.
TEXAS: Embrace the courageous spirit of our people, history and culture.