Applicants must meet all the required qualification requirements, including education and any selective placement factors described below by the closing date of this announcement. Education may only be substituted in accordance with the Office of Personnel Management (OPM) Qualification Standards Handbook. Education must be accredited by an accrediting institution recognized by the U.S. Department of Education in order to be credited towards qualifications.
Education completed in foreign colleges or universities may be used to meet the education requirements if you can show that the foreign education is comparable to that received in an accredited educational institution in the United States. It is your responsibility to provide such evidence when applying. Click on the link for a list of accredited organizations recognized as specializing in interpretation of foreign education credentials.
IN ADDITION to meeting one of the basic qualifications requirements listed above, the applicant MUST have at least 1 full year of specialized professional engineering experience that has equipped them with the particular knowledge, skills, and abilities to successfully perform the duties of the position. This experience is related to the work of the position and equivalent to at least the GS-12 level in the Federal service. Qualifying specialized experience must demonstrate the following:
-Experience in the maintenance and operation of a large scale facility which requires providing solutions to technical problems on a daily basis. These might include planning repairs and replacements of equipment and major building systems and sub-systems (e.g. water, electrical, mechanical, emergency and standby power systems)
-Experience analyzing and troubleshooting the performance of the major components of a Heating, Ventilation and Air Conditioning (HVAC) system for a large scale facility
-Experience in the use and application of technology for monitoring building performance (e.g. HVAC and other building-level controls)
Note: All applicants MUST submit transcripts as verification of educational
requirement, EIT documentation and/or copy of professional registration by the closing date of this announcement. If you fail to provide requested information, or the information you submit is insufficient to verify your
eligibility, you WILL lose consideration for this position.
Applicants applying as Mechanical Engineers must show that they possess a professional knowledge of general engineer as evidenced by one of the following:Basic Requirements:
A. Degree: professional engineering. To be acceptable, the curriculum must: (1) be in a school of engineering with at least one curriculum accredited by the Accreditation Board for Engineering and Technology (ABET) as a professional engineering curriculum; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. OR
B. Combination of education and experience--college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying professional engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by ONE of the following:
Professional registration --Current registration as a professional engineer by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.
- Written Test- Evidence of having successfully passed the Engineer-in-Training (EIT) examination, or the written test required for professional registration, which is administered by the Boards of Engineering Examiners in the various States, the District of Columbia, Guam, and Puerto Rico. Applicants who have passed the EIT examination AND have completed all the requirements for either (a) a bachelor's degree in engineering technology (BET) from an accredited college of university that included 60 semester hours of courses in the physical, mathematical, and engineering sciences, OR (b) a BET from a program accredited by the Accreditation Board for Engineering and Technology (ABET) may be rated eligible for certain engineering positions at GS-5. Eligibility is limited to positions that are within or closely related to the specialty field of the engineering technology program. Applicants for positions that involve highly technical research, development, or similar functions requiring an advanced level of competence in basic science must meet the basic requirements in paragraph A.
Because of the diversity in kind and quality of BET programs, graduates of other BET programs are required to complete at least 1 year of additional education or highly technical work experience of such nature as to provide reasonable assurance of the possession of the knowledge, skills, and abilities required for professional engineering competence. The adequacy of this background must be demonstrated by passing the EIT examination.
- Specified academic courses--Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and in engineering that included the courses specified in the basic requirements. The courses must be fully acceptable toward meeting the requirements of a professional engineering curriculum as described in paragraph A.
- Related curriculum--Successful completion of a curriculum leading to a bachelor's degree in engineering technology or in an appropriate professional field, e.g., physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all-inclusive.)
Note: An applicant who meets the basic requirements as specified in A or B above may qualify for positions in any branch of engineering unless selective factors indicate otherwise, or unless he/she qualifies under the provisions of B.2 related to the EIT examination or BET degree.
Note: All applicants MUST submit transcripts as verification of educational requirement, EIT documentation and/or copy of professional registration by the closing date of this announcement. If you fail to provide requested information, or the information you submit is insufficient to verify your eligibility, you WILL lose consideration for this position.
HOW YOU WILL BE EVALUATED:
Your application will be evaluated and rated under the Category Rating and Selection procedures. Based on your responses to the job-specific self-assessment questions, eligible candidates are placed for selection consideration into one of three pre-defined quality categories as described below:
Highly-qualified Category - In addition to meeting minimum qualifications for the position, candidates must fully demonstrate proficiency in all major aspects of the position.
Well Qualified Category - In addition to meeting minimum qualifications, candidates must demonstrate proficiency in some but not all of the major aspects of the position.
Qualified Category - In addition to meeting minimum qualifications, applicants must demonstrate a basic level of knowledge, skill and ability of the position.
Your qualifications will be evaluated on the following knowledge, skills, abilities (KSAs) and other characteristics that are relevant to the duties of this position and must be fully supported by information in your resume:
-Knowledge of civil, electrical, and/or mechanical engineering. To preview questions please click here.
-Knowledge of building construction and preventive maintenance principles, practices, and requirements to assist in establishing and administering control systems and procedures for technical service operations.
-Ability to develop maintenance plans.
-Skill in applying principles, methods, tools to develop, schedule, coordinate, monitor, evaluate and manage projects and resources, including technical performance.
Your resume serves as the basis for qualification determinations and must highlight your most relevant and significant work experience(s) and education (if applicable) as it relates to this job opportunity. In order to fully evaluate your application and receive proper credit, your resume should include: (1) paid and non-paid experience, job title, dates held (month and year for qualifying purposes to receive credit), number of hours worked per week, and salary (2) knowledge of the subject matter and technical skills pertinent to this position; (3) specific duties performed that fully detail the level and complexity of the work; and (4) names and phone numbers of your current and/or previous supervisor(s). Your resume should contain sufficient information to make a valid determination that you fully meet the basic/specialized experience requirements as stated in this job opportunity announcement for each grade level(s) for which you are applying. This information should be clearly identified in your resume. Failure to provide information sufficient to determine your qualifications for the position will result in loss of consideration. For tips on writing your resume, please visit the USAJOBS Resource Center.
If, after reviewing your resume and self-assessment questionnaire responses and a determination is made that you have inflated your qualifications and/or experience, a score will be manually determined that reflects your documented experience. This may result in a lower score, which may also eliminate you from consideration for this position.
Application of Veterans Preference: The Category Rating Method does not add veterans' preference points or apply the "rule of three," but protects the rights of veterans by placing them ahead of non-preference eligibles within each pre-defined quality category. Preference eligibles who meet minimum qualification requirements and who have a compensable service-connected disability of at least 10 percent (i.e., CPS and CP) must be listed in the highest quality category, except when the position being filled is scientific or professional at the GS-09 grade level or higher.
Agency Career Transition Assistance Program (CTAP) or Interagency Career Transition Assistance Program (ICTAP) candidates must be rated "Well Qualified" for the position to receive consideration for special priority.
Applicants must meet all the qualification requirements and submit any required supporting documentation by the closing date of this announcement. Applicants found to be among the top qualified candidates will be referred to the hiring official for further consideration and possible interview.