This job originated on www.usajobs.gov. For the full announcement and to apply, visit www.usajobs.gov/job/464309600. Only resumes submitted according to the instructions on the job announcement listed at www.usajobs.gov will be considered.
NATIONAL GUARD MEMBERSHIP IS REQUIRED: This is an excepted position that requires membership in a compatible military assignment in the National Guard. Selectee will be required to wear the military uniform. Acceptance of an excepted position constitutes concurrence with these requirements as a condition of employment.
LOCATION: NGLA-ENB-M (FMS#2), LINCOLN PARISH, RUSTON, LA
This position is located in the Joint Forces HeadquartersState, Logistics Directorate (J-4), Surface Maintenance Facility. The purpose of this position is to perform maintenance, repair, troubleshooting, inspection, and/or overhaul of a variety of combat, tactical, commercial, and special purpose vehicles and equipment.
Open Area of Consideration: 1
DEFINITION OF AREA(S) OF CONSIDERATION:
Area 1 = Warrant Officer (CW4 and below) and Enlisted members that are currently on-board permanent technicians within the Louisiana National Guard.
NOTICE: THIS EMPLOYER PARTICIPATES IN E-VERIFY: FEDERAL LAW REQUIRES ALL EMPLOYERS TO VERIFY THE IDENTITY AND EMPLOYMENT ELIGIBILITY OF ALL PERSONS HIRED TO WORK IN THE UNITED STATES.
Learn more about this agency02/16/2017 to 03/08/2017
$23.61 - $27.60 per hour
WG 10
1 vacancy in the following location:
Not required
No
Permanent - Excepted Service Permanent
Full-time - Full Time
5801 Miscellaneous Transportation/Mobile Equipment Maintenance
No
LA 1914894
464309600
DUTIES AND RESPONSIBILITIES:
(1) Troubleshoots, performs maintenance and major repairs on
heavy-duty mobile equipment, combat, tactical and automotive vehicles. This may
include self-propelled artillery, tracked cargo and personnel carriers, road
graders, mobile cranes, front loaders, conveyors, bulldozers, power shovels,
compressors, generators, tanks, tracked combat vehicles, sedans, buses,
all-terrain vehicles, trucks, semi-trailers, forklifts, tractors, and accessory
equipment. Troubleshoots, repairs and overhauls major systems to include
internal combustion engines, turbine engines, automatic and non-automatic
transmissions, heavy duty drive line systems, and hydraulic utility systems and
controls. Makes repairs to assemblies and components such as voltage
regulators, generators/alternators, brake cylinders, etc. Performs work in
accordance with modification work orders, technical manuals, lubrication
orders, maintenance bulletins, regulations or management policies.
(2) Troubleshoots equipment and diagnoses the cause of mechanical failures by means of visual and auditory checks and/or uses test equipment such as engine analyzers, compression testers, voltmeters, ohmmeters, pressure gauges, and computer diagnostic tools. Utilizes embedded diagnostics in equipment and a wide variety of original equipment manufacturer system analyzers in order to determine the exact nature or extent of repair. Determines what adjustments may be necessary to complete work orders, and whether any additional repairs other than those specified or indicated on the work order are necessary.
(3) Removes and disassembles engines and major assemblies, sub-assemblies, components, and fuel, hydraulic, and oil pressure systems. Makes the appropriate repairs, overhaul, or modifications in accordance with the proper repair specifications and procedures. Reassembles engines and other systems, and adjusts, tests, and reinstalls in vehicles and equipment as necessary. Makes adjustments and repairs to electrical and suspension systems. May install pistons, sleeves, rings, bearings, rods, crankshafts, timing gears, and rocker arms. May be required to perform fuel injection equipment repair, overhaul, rebuild, and calibration duties utilizing a variety of complex test and calibration equipment.
(4) Independently performs repairs and maintenance functions in remote locations that can be accomplished by removing, cleaning, reinstalling, or replacing defective parts of components and systems such as injectors, leaking wheel cylinders, corroded mufflers, fuel tanks, brake cylinders and worn brake shoes, voltage regulators, generators, injector pumps, and fuel pumps. Provides technical guidance and specialized team leadership to lower grade employees within the team. Assists lower grade mechanics in performing major repair work. May provide Field and limited Sustainment maintenance at unit locations as part of a "contact team." Recovers and evacuates inoperable vehicles from the unit location of breakdown. May assist higher graded mechanics in repairing a variety of interconnected systems such as electrical, air and hydraulic systems, complex state of the art electrical and electronic systems that use specialized diagnostic equipment to identify problems, complex fuel injection systems and other similar complex systems.
(5) Conducts readiness and repair inspections on vehicles and associated equipment supported by the activity. Performs operational inspections and ensures vehicles and equipment are properly serviced, including brake adjustments, replacing hydraulic fluids, greasing, cleaning, etc., and performs other preventive maintenance operations as required. Inspects supported equipment prior to use during Inactive Duty Training (IDT) and Annual Training (AT), to ensure that it is functioning properly. May inspect in-process repair work of lower graded repairer to ensure equipment is being repaired in accordance with pertinent requirements. May serve as a commodity inspector during Command Maintenance Management evaluations (COMET) or as a member of a Maintenance Assistance Instruction Team (MAIT). Instructs operator/crew in the maintenance of equipment and provides technical advice and assistance to supported units when requested.
(6) May maintain and repair electronics communication equipment by removing and replacing components and elements. Equipment includes such items as radios, field telephones, amplifiers, switchboards, recorders, intercoms.
(7) Assists in the maintenance of production reports and records, and makes recommendations to the supervisor. Plans, organizes, and performs technical analyses as required or assigned. Makes recommendations to the supervisor as to adjustments necessary to effectively, efficiently and economically accomplish the work and maximize production.
(8) Performs other duties as assigned.
Participation in direct deposit is mandatory.
GENERAL EXPERIENCE: Experience or training which demonstrates knowledge of equipment to be able to do routine jobs, simple preventative maintenance tasks, and is able to use common tools and equipment in the line of work.
SPECIALIZED EXPERIENCE: Experience or training diagnosing, repairing, overhauling, and modifying more complex vehicles, equipment, and more complicated systems. Experience which has provided a thorough knowledge of diagnostic equipment. Experience applying independent judgment in determining methods and techniques required to solve unusually complex maintenance and repair problems. Experienced in testing, inspecting, and evaluating the work performed on vehicles, equipment and systems which has provided the candidate with the Knowledge, Skills, and Abilities listed below.
KSAs:
I: Knowledge of the mechanical makeup, operation, and working relationships of complex systems, assemblies, and parts for a variety of combat, tactical, commercial, special purpose vehicles and equipment.
II: Knowledge of electrical, electronic, hydraulic, pneumatic, and other non-mechanical systems that have a functional relationship and effect on the operation of mechanical systems.
III: Knowledge of hydraulic lifting, loading, turning, and positioning systems and their mechanical, hydraulic, pneumatic, electrical, and electronic controls.
IV: Knowledge of electronics, sufficient to identify and replace defective components, such as sensors, diodes, and circuit boards.
V: Ability to repair or overhaul major components such as diesel, multi-fuel or gasoline engines, turbine engines, automatic and manual transmissions, drive line assemblies, electrical and electronic systems and accessories, fuel injection systems, and emission control systems.
VI: Ability to utilize, interpret and apply parts list, manufacturer's repair manuals, technical manuals, diagrams, engineering drawings, diagnostic computer information, and schematics.
MILITARY REQUIREMENTS: Selected candidates will be required to be in a compatible military grade prior to the effective date of placement. Selectee must also be in a compatible military assignment (MOS/AFSC) prior to or within one year of placement.
SECURITY CLEARANCE: Must maintain appropriate level of security clearance.
Compatible Military Grades & Assignments:
· WARRANT (CW4 and below): CMF 12, 13, 14, 19, 25, 91; 92, 94, 882A;
· ENLISTED: CMF 12, 13, 14, 19, 25, 88, 91, 92, 94;
***LOUISIANA NATIONAL GUARD MEMBERS Acceptance of this position may result in the loss of contracted incentive(s). For further details, contact the LANG State Incentive Manager, at (504) 278-8116***
1. If you are a male applicant who was born after 12/31/59 and are required to register under the Military Selective Service Act, the Defense Authorization Act of 1986 requires that you be registered or you are not eligible for appointment in this agency.
2. Please do not send/fax/courier/email any applications or resumes to the National Guard Human Resources Office. You must apply on-line or fax your application to the fax number listed in this announcement with the prescribed Cover Letter. The Human Resources Office can only process materials received through USAJOBS.
You will be evaluated for this job based on how well you meet the qualifications above.
HOW YOU WILL BE EVALUATED:
Once the application process is complete, a review of your application will be made to ensure you meet the job requirements. To determine if you are qualified for this job, a review of your resume and supporting documentation will be made and compared against your responses to the occupational questionnaire. The rating you receive is based on your responses to the questionnaire and supporting documents. If, after reviewing your resume and or supporting documentation, a determination is made that you have inflated your qualifications and or experience, your score can and will be adjusted to more accurately reflect your abilities. Please follow all instructions carefully. Errors or omissions may affect your rating.
For this job announcement the following documents are required:
*PLEASE ENSURE THAT YOU CALL THE HUMAN RESOURCES OFFICE DURING BUSINESS HOURS OF 0700-1730, TUESDAY THROUGH FRIDAY AT (504) 278-8737/8748/8767 TO VERIFY RECEIPT OF YOUR APPLICATION BEFORE THE CLOSING DATE OF THE ANNOUNCEMENT.
To submit the documents requested follow the instructions below: Your resume, curriculum vitae, the Optional Application for Federal Employment (OF 612), or any other written format you choose to describe your job-related qualifications Your document(s) can be submitted electronically using the document upload process by fax. Please ensure that your resume contains your full name, address, phone and at least your last four digits of your social security number.
Note: Please ensure that your resume contains the basic information outlined under the Applying for a Federal Job link: http://www.opm.gov/forms/pdfimage/of0510.pdf
Education must be accredited by an accrediting institution recognized by the U.S. Department of Education in order for it to be credited towards qualifications. Therefore, provide only the attendance and/or degrees from schools accredited by accrediting institutions recognized by the U.S. Department of Education.
Failure to provide all of the required information as stated in this vacancy announcement may result in an ineligible rating or may affect the overall rating.
Option A: Applying Online
Tips for using the Online
Qualifications Assessment Questionnaire:
·
You
must click the Submit My Answers button to submit your application package when
you are done. Your Online
Qualifications Assessment Questionnaire is not processed and your resume is
not attached until you click the Submit My Answers button, even if
USAJOBS says it sent your resume.
·
You
can upload or fax supporting documents after you Submit the Online
Qualifications Assessment Questionnaire.
·
To
receive consideration, you must complete the entire process and submit the complete
application package by 11:59 PM (EST) on the closing date -- TAG:Closing Date.
·
It
is your responsibility to ensure that your responses and appropriate
documentation are submitted prior to the closing date.
· To make sure everything you submitted is successfully received and to verify your application is complete, follow these steps: Log into your USAJOBS account using the following link: https://my.usajobs.gov/Account/Login. Click on Application Status and then select the more information link for this position. The Details page will display the status of your application, the documentation received and processed, and any correspondence the agency has sent related to this application. Please Note: Your uploaded documents may take several hours to clear the virus scan process. Verify that all of your documents appear on the Details page with a status of Processed.
·
You
can save your work and come back later. Just click both Save and Logout. To return to an incomplete application, log
into your USAJOBS account and select Application Status. Choose the vacancy, and click Update
Application in the vacancy announcement.
You must re-select your resume and/or other documents from your USAJOBS
account or your application will be incomplete.
·
If you submit more than one Qualifications
Assessment Questionnaire for this position, the most recent one Submitted is the one that is used.
Therefore, it is important for you to complete it in its entirety.
Option B: Faxing Applications or Supporting Documents
You are encouraged to apply online. Applying online will allow you to review and
track the status of your application. NOTE:
If you applied online and your application is complete, do not fax the
paper application (OPM Form 1203-FX) as this will overwrite your prior online responses
and may result in you being found ineligible.
If you completed the occupational questionnaire online and are unable to upload supporting document(s), please follow steps 1 and 2 below:
1. To fax your documents, you must use the following cover page: http://staffing.opm.gov/pdf/usascover.pdf, and provide the required information. The Vacancy ID is TAG:Vacancy ID.
2. Fax your documents to 1-478-757-3144.
If you cannot complete the Application Package online, you may fax all of your
materials. The complete application
package must be submitted by 11:59 PM (EST) on TAG:Closing Date to receive consideration. Keep a copy of your fax confirmation in the
event verification is needed.
To complete the occupational questionnaire and submit via fax, please follow steps 1, 2, and 3 below:
1. Click the following link to view and print the occupational questionnaire TAG:Link to Full Questionnaire.
2. Print the OPM Form 1203-FX; follow the instructions and provide your responses to the occupational questionnaire items: http://www.opm.gov/forms/pdfimage/opm1203fx.pdf .
3. Fax the completed OPM Form 1203-FX, along with any supporting documents to 1-478-757-3144. Your OPM Form 1203-FX will serve as a cover page for your fax transmission. Note: Do not include a fax cover sheet with the OPM Form 1203-FX. This will cause your application to not process.
Once the online questionnaire is received you will receive an acknowledgement email that your submission was successful. After a reveiw of your complete application is made you will be notified of your rating and or referral to the hiring official. If further evaluation or interviews are required you will be contacted.
Instructions for completing the OPM 1203-FX:
If you are applying to this announcement by completing the OPM 1203-FX form instead of using the Online Application method, please use the following step-by-step instructions as a guide to filling out the required questionnaire. You will need to print the vacancy announcement and refer to it as you answer the questions. You may omit any optional information; however, you must provide responses to all required questions. Be sure to double check your application before submission.
TAG:Questionnaire
The Federal hiring process is set up to be fair and transparent. Please read the following guidance.
This job originated on www.usajobs.gov. For the full announcement and to apply, visit www.usajobs.gov/job/464309600. Only resumes submitted according to the instructions on the job announcement listed at www.usajobs.gov will be considered.
Learn more about
LOUISIANA NATIONAL GUARD
HUMAN RESOURCES OFFICE
TECHNICIAN VACANCY ANNOUNCEMENT