Serve as an Electro-Optical Sensor Systems Engineer in the Remote Sensing Branch, Langley Research Center, and provide expert consultation in the design of space-based active and passive remote sensing systems. Conduct equipment development in multiple science and engineering projects applying remote sensing technologies for use in ground, and space-based measurement systems for science exploration.Learn more about this agency
- Conduct electro-optical design, development and testing of active and passive remote sensor systems and subsystems in measurements for exploration applications.
- Apply theoretical and experimental expertise in electronics, physics, and optics, knowledge of electromagnetic sources, such as lasers, for lidar instrument simulation and performance modeling.
- Develop advanced lidar component technologies including Photonic Integrated Circuits that can advance lidar sensors and instruments for navigation and hazard avoidance, and atmospheric measurements.
- Design, develop and procure Photonic Integrated Circuits for Lidar electro-optical subsystems.
- Lead the design and implementation of frequency modulated continuous wave lidar instruments.
- Support the development and analysis of high-speed signal processing and data acquisition algorithms and their associated hardware for remote sensing instruments.
- Apply understanding of engineering and science objectives, and translate high-level measurement requirements into detailed requirements at the subsystem and component levels that can be realized within schedule and funding allocations.
- Collaborate with scientists, engineers, and project personnel to develop measurement concepts, design lidar-based system architectures, and to assemble and test flight instrumentation for advanced remote sensing systems.
- Work with instrument scientists/principal investigators to determine and establish system priorities and schedule changes to accommodate evolving mission objectives; and to advance the state-of-the-art in electro-optical systems and photonics.
- Assess new technologies and approaches through the development and analysis of breadboard systems for advanced lidar instruments, and perform technical trade studies focused on the electro-optical design of lidar remote sensing instruments.
- Support in-the-field/flight test campaigns of remote sensing instruments by designing test criteria, applying necessary ground support equipment, and performing system operation and real-time/post test data analysis.
- Generate/review development and design approaches for adequacy, feasibility, cost, and conformance to overall goals/best engineering practices. Present results at project reviews/conferences.
- Write/review technical goals and approaches; monitor progress during development, design, and testing.
Occasional travel - Travel may be required for training or other work-related duties
Job family (Series)
Conditions Of Employment
- This position is open to U.S. citizens, nationals or those who owe allegiance to the U.S.
- A one-year probationary period may be required
- Position subject to pre-employment background investigation
QualificationsIn addition to the Basic Education Requirement, you must have one year of specialized experience equivalent to the next lower grade (GS-12), which has equipped you with the particular competencies needed to successfully perform the duties of the position described above.
To qualify for GS-13:
Specialized experience includes performing duties such as design of space-based active and/or passive remote-sensing systems; design, trade studies, and performance analyses of Photonic Integrated Circuits (PICs) for lidar instruments; conducting investigations and studies to assist with defining design criteria for remote-sensing applications; and finding solutions to problems in design, implementation, or operations of active systems.
Your resume must include a clear and detailed narrative description, in your own words, of how you meet the required specialized experience. Experience statements copied from a position description, vacancy announcement or other reference material constitutes plagiarism and may result in disqualification and losing consideration for the job.
Please spell out all acronyms.
Basic Education Requirement: A bachelor's degree from an accredited college or university with major study in Aeronautical Engineering, Aeronautics, Aerospace Engineering, Architecture, Astronautical Engineering, Astronautics, Astronomy, Astrophysics, Biomedical Engineering, Ceramic Engineering, Ceramics, Chemical Engineering, Chemistry, Civil Engineering, Computer Engineering, Computer Science*, Life Science, Earth and Planetary Science, Electrical Engineering, Electronics Engineering, Geology, Geophysics, Industrial Engineering, Materials Engineering, Materials Science, Mathematics (Pure or Applied), Applied Mechanics, Engineering Mechanics, Mechanical Engineering, Metallurgical Engineering, Metallurgy, Meteorology, Nuclear Engineering, Nuclear Engineering Physics, Oceanography, Optical Engineering, Physics, Applied Physics, Engineering Physics, Space Science, Structural Engineering, Welding Engineering or other appropriate physical science or engineering field.
Degrees in engineering technology are not considered to be qualifying for this position.
*Note: Curriculum must include 30 semester hours of course work in a combination of mathematics, statistics and computer science that provided in-depth knowledge of the following: (1) theoretical foundations and practical applications of computer science, including digital computer system architecture and system software organization, the representation and transformation of information structures and the theoretical models for such representations and transformations; and (2) essential mathematical and statistical techniques. Of the 30 semester hours, 15 must be in any combination of statistics and mathematics which includes differential and integral calculus.
U.S. Engineering degrees must have been awarded from a college or university school of engineering with at least one curriculum accredited by the Engineering Accreditation Commission (EAC) of the Accreditation Board for Engineering and Technology (ABET). To find out if a degree meets this requirement, go to http://www.abet.org.
Foreign Engineering degrees must be recognized by a Mutual Recognition Agreement (MRA), often known as accords These are non-governmental agreements among organizations that accredit academic degree programs. MRAs recognize the substantial equivalence of mature accreditation systems and programs accredited by signatory organizations within their jurisdictions. For a listing of Signatories, please visit, https://www.abet.org/global-presence/mutual-recognition-agreements/is-your-program-recognized/.
Science and other related degrees must have been awarded from colleges or universities that are accredited by recognized accrediting organizations. For a list of schools that meet this criteria, go to http://ope.ed.gov/accreditation/.
If you are using education completed in foreign colleges or universities to meet the qualification requirements, you must show that the education credentials have been evaluated by a private organization that specializes in interpretation of foreign education programs. These education credentials must be deemed equivalent to that gained in an accredited U.S. education program; or full credit has been given for the courses at a U.S. accredited college or university. For further information, visit: https://www2.ed.gov/about/offices/list/ous/international/usnei/us/edlite-visitus-forrecog.html.
All degrees must have been received in the year of, or any year subsequent to the original date of accreditation.
Official transcripts will be required at the time of selection to verify that you meet the educational requirement or substitution.
This position is announced under Direct Hire authority. Recruitment for this position will follow guidelines established by the Office of Personnel Management for use of Direct Hire authority.
If you have special priority selection rights under the Agency Career Transition Assistance Program (CTAP) or the Interagency Career Transition Assistance Program (ICTAP), you must:
Indicate your eligibility when applying for a position. The USAJOBS resume asks you to identify your ICTAP eligibility; the NASA Supplemental Information asks you to identify your CTAP eligibility.
Be well qualified for this position to receive consideration. See 'How You Will Be Evaluated' for NASA's definition of well qualified.
Be prepared to submit proof that you meet the requirements for CTAP/ICTAP if you are selected for the position. This includes copies of your agency notice, most recent Performance Rating and most recent Notification of Personnel Action (SF-50) noting current position, grade level, and duty location.
As identical vacancies are identified, additional selections may be made.
You must meet qualifications requirements by the closing date of this announcement.
How You Will Be Evaluated
This position is announced under Direct Hire authority. A Human Resources Specialist will review your resume to determine if you meet the qualifications and eligibility requirements as listed in 'Requirements'.
CTAP and ICTAP candidates will be assessed using NASA STARS, an automated system that matches the competencies extracted from your resume to the competencies identified by the selecting official for the position. Based on the competencies you match, you are placed in one of three categories identified as 90, 80, or 70 point quality categories, which are defined as:
90 pt. Category - Tentatively meets (until subsequent confirmation upon referral) the basic qualification requirements identified in the vacancy announcement and has experience in the same or similar job that has demonstrated superior proficiency in the primary requirements of the position.
80 pt. Category - Tentatively meets (until subsequent confirmation upon referral) the basic qualification requirements identified in the vacancy announcement and demonstrates satisfactory proficiency in the primary requirements of the position.
70 pt. Category - Fails to meet criteria described in the 80 pt. category.
For the purpose of the CTAP and ICTAP, candidates rated in the top quality (90 pt.) category are considered well-qualified.
Background checks and security clearance
Drug test required
NASA's application process has been specifically developed to ensure that we only ask you for the information we absolutely need to evaluate your qualifications and eligibility. In order to apply for this position, you only need to submit your resume and answer the screening questions and supplemental information. No additional documentation is accepted at the time of application. (For example you need not submit narrative 'KSA' statements; they are not required and will not be evaluated.) In this way we allow you to focus on preparing a resume that best describes your background and abilities. For assistance in preparing your resume, consult the Applicant Guide. Nothing further is required until requested by the Human Resources Office. At that point, we may ask you to submit documentation to support statements made in your resume. For example, we may ask you to provide academic transcripts or proof of Federal employment status. If you fail to provide the required documents within the stated time period, we may withdraw a job offer and/or remove you from further consideration.
If you are relying on your education to meet qualification requirements:
Education must be accredited by an accrediting institution recognized by the U.S. Department of Education in order for it to be credited towards qualifications. Therefore, provide only the attendance and/or degrees from schools accredited by accrediting institutions recognized by the U.S. Department of Education.
Failure to provide all of the required information as stated in this vacancy announcement may result in an ineligible rating or may affect the overall rating.
A career with the U.S. Government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding.
Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time, or intermittent. Contact the hiring agency for more information on the specific benefits offered.
How to Apply
Before you begin the application process, please read the vacancy announcement carefully and have all required information available. Failure to submit a resume that contains all of the required information may result in loss of consideration. Your application must be received no later than midnight Eastern Time on the closing date of the announcement.
You may begin the process of submitting your resume by clicking on the 'Apply Online' link. In order to be considered, you must submit a resume completed on the USAJOBS site. When completing your USAJOBS resume, please remember that NASA limits resumes to approximately 32,000 characters including spaces.
NASA does not accept uploaded resumes created outside of the USAJOBS resume builder process. Additionally, NASA does not accept documents attached through the USAJOBS' document attachment feature.
Once you submit your resume to NASA, you will be transferred to a NASA website and asked to complete a short series of NASA-specific questions. Your answers will not be saved unless you finish the entire application. You may edit a previously-submitted application, if the announcement is still open.
If you successfully apply, USAJOBS will show your application status as 'Received'. If your status is 'Unavailable', you have not successfully applied. Do not rely on a USAJOBS email to confirm successful application. Only an email from NASA confirms a successful application.
Due to COVID-19, we are unable to take hard copy applications at this time. If you are having issues applying, please reach out to firstname.lastname@example.org and let them know the announcement number and issue BEFORE the announcement closes. The NASA Shared Services Center (NSSC) staffing unit will review the request and, if accepted, The NASA Resume Operations Center (ROC) will work with you to have your resume and supplemental information scanned into the system.
If you are a first time applicant, we recommend that you review NASA's Applicant Guide to ensure that you are providing a complete resume. Failure to submit the supplemental data and a resume that contains all of the required information may result in loss of consideration for positions. All applications must be received no later than midnight Eastern Time on the closing date of the announcement.
Agency contact information
NASA Staffing Services
AddressNASA's Resume Operations Center
4200 Rideout Road, Mailstop HS50
Marshall Space Flight Center, AL 35812
Visit our careers page
Learn more about what it's like to work at Langley Research Center, what the agency does, and about the types of careers this agency offers.
If you are found to meet the qualification and eligibility requirements, you will be referred to the selecting official for further consideration. (In some cases, individuals with priority for special consideration must be considered and selected before other candidates.) Whether or not you are contacted for an interview depends upon the location of the position and the judgment of the selecting official. At NASA, we pride ourselves on efficient and timely recruitment actions, and you can normally expect to learn the outcome of the selection process in a fairly short period of time. In addition, to ensure that you can measure progress for yourself, NASA provides you with regularly updated information on the status of the vacancy announcement.
Fair & Transparent
The Federal hiring process is setup to be fair and transparent. Please read the following guidance.
Equal Employment Opportunity Policy
The United States Government does not discriminate in employment on the basis of race, color, religion, sex (including pregnancy And gender identity), national origin, political affiliation, sexual orientation, marital status, disability, genetic information, age, membership in an employee organization, retaliation, parental status, military service, or other non-merit factor.
Reasonable Accommodation Policy
Federal agencies must provide reasonable accommodation to applicants with disabilities where appropriate. Applicants requiring reasonable accommodation for any part of the application process should follow the instructions in the job opportunity announcement. For any part of the remaining hiring process, applicants should contact the hiring agency directly. Determinations on requests for reasonable accommodation will be made on a case-by-case basis.
A reasonable accommodation is any change to a job, the work environment, or the way things are usually done that enables an individual with a disability to apply for a job, perform job duties or receive equal access to job benefits.
Under the Rehabilitation Act of 1973, federal agencies must provide reasonable accommodations when:
- An applicant with a disability needs an accommodation to have an equal opportunity to apply for a job.
- An employee with a disability needs an accommodation to perform the essential job duties or to gain access to the workplace.
- An employee with a disability needs an accommodation to receive equal access to benefits, such as details, training, and office-sponsored events.
You can request a reasonable accommodation at any time during the application or hiring process or while on the job. Requests are considered on a case-by-case basis.
Legal and regulatory guidance
This job originated on www.usajobs.gov. For the full announcement and to apply, visit www.usajobs.gov/GetJob/ViewDetails/575577300. Only resumes submitted according to the instructions on the job announcement listed at www.usajobs.gov will be considered.